User's Manual

© 2004 American Honda Motor Co., Inc - All Rights Reserved. 08R80-MCH-3000-9C 1 of 8
Accessory Application Publications No.
Issue Date
Honda Dealer: Please give a copy of these instructions to your customer.
INSTALLATION
INSTRUCTIONS
TORQUE CHART
Tighten all screws, bolts and nuts to their specified torques.
Refer to the Service Manual for the tightening torques of
removed parts.
TOOLS REQUIRED
Socket (8 and 12 mm)
Ratchet
Box-end wrench (12 mm)
Torque wrench
CUSTOM WINDSHIELD
PERFORMANCE STYLE
P/N 08R80-MCH-300C
P/N 08R80-MCH-300G
VTX1800C/F
September 2004
USE AND CARE INFORMATION
• When this windshield is dirty, rinse it thoroughly with
cool water to remove loose dirt, then wipe with a clean
cloth or sponge.
Do not use a brush to clean this windshield as it may
scratch the surface.
• Never use petroleum solvents such as gasoline, thinner
or benzine to clean the windshield. Also do not use
acid or alkaline cleaners.
Wipe up spilled brake or battery fluid at once as they
may damage the plastic surface.
• If the motorcycle is left covered for an extended period
of time, park in the shade. Parking a covered motorcycle
in direct sunlight can cause the windshield to deform
due to heat buildup under the cover.
• Check the windshield mounts frequently and retighten
if necessary.
No. Description Qty
(1) Custom windshield 1
(2) Upper stay 1
(3) Lower stay 1
(4) 8 mm flange bolt 2
(5) 8 mm flange nut 2
(6) 6 mm SH flange bolt 4
(7) Washer 4
(8) Grommet 4
(9) Collar 4
(10) Meter visor 1
Item N·m kgf·m Ibf·ft
6 mm SH flange bolt 9 0.9 6.5
8 mm flange bolt and nut 26 2.7 20
(1)
(2)
(3)
(6)
(8)
(6)
(7)
(8)
(9)
(4)
(7)
(9)
Included in the P/N 08R80-MCH-300G
APPLICATION
P/N 08R80-MCH-300C: VTX1800C
P/N 08R80-MCH-300G: VTX1800F
(10)
(5)
PARTS LIST