User's Manual

2 of 8 08R80-MCH-3000-9C © 2004 American Honda Motor Co., Inc - All Rights Reserved.
INSTALLATION
1. Install the meter visor. (VTX1800F only)
METER VISOR
Remove the adhesive
backing before attaching.
ISOPROPYL ALCOHOL
Thoroughly clean the area
where the meter visor will be
attached.
2. Remove the bolts as shown.
3. Install the upper stay as shown.
UPPER STAY
TOP BRIDGE
HEADLIGHT
Side View
THROTTLE CABLES
Route the throttle cables, install the hose guide as shown.
UPPER STAY
BOLT (Reuse)
UPPER
STAY
8 mm FLANGE BOLT
BOLT (Reuse)
HOSE GUIDE
BOLT (Save)
BOLT (Reuse)
Only for motor-
cycles equipped
with the front fork
cover.
BOLT (Reuse)
Only for motor-
cycles equipped
with the front fork
cover.