2002 Insight Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com. Contents Owner's Identification Form Introduction ......................................................................................................................................... i A Few Words About Safety................................................................................
Main Menu Owner’s Identification This Owner’s Manual should be considered a permanent part of the car, and should remain with the car when it is sold. OWNER ADDRESS STREET CITY STATE/PROVINCE ZIP CODE/ POSTAL CODE This Owner’s Manual covers all models of the Insight. You may find descriptions of equipment and features that are not on your particular model. V. I. N. DELIVERY DATE (Date sold to original retail purchaser) DEALER NAME DEALER NO.
Main Menu Introduction Congratulations! Your selection of a 2002 Honda Insight was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new Honda is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your car so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
Main Menu A Few Words About Safety Your safety, and the safety of others, is very important. And operating this car safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your car.
Main Menu Your Car at a Glance POWER WINDOW SWITCHES (P. 77) HEATING/COOLING CONTROLS (P. 84, 91) AUDIO SYSTEM (P. 98) DIGITAL CLOCK FCD SELECT BUTTON (P. 54) DOOR LOCK (P. 71) FUEL FILL DOOR RELEASE (P. 119) HOOD RELEASE HANDLE (P. 120) * U.S. model 2 AUTOMATIC TRANSMISSION (CVT)* (P. 138) MANUAL TRANSMISSION (P.
Main Menu Your Car at a Glance MIRROR CONTROLS (P. 78) WINDSHIELD WIPERS/WASHERS (P. 63) HAZARD WARNING LIGHTS (P. 65) POWER WINDOW SWITCHES (P. 77) HEADLIGHTS/TURN SIGNALS (P. 61, 63) HORN DRIVING MODE BUTTONS(CVT)* REAR WINDOW DEFOGGER (P. 65) * U.S.
Main Menu 4
Main Menu Driver and Passenger Safety This section gives you important information about how to protect yourself and your passenger. It shows you how to use seat belts properly. It explains your Supplemental Restraint System. And it tells you how to properly restrain children in your car. Important Safety Precautions .......... 6 Your Car’s Safety Features .............. 7 Seat Belts ........................................ 8 Airbags ............................................ 9 Seats & Seat-Backs ......
Main Menu Table of Contents Important Safety Precautions You’ll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags supplement seat belts, but airbags are designed to inflate only in a moderate to severe frontal collision.
Main Menu Table of Contents Your Car’s Safety Features (1) (3) Your car is equipped with many features that work together to protect you and your passenger during a crash. (4) (9) (6) (7) (2) (5) (8) (2) (1) Safety Cage (2) Crush Zones (3) Seats & Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Seat Belt Tensioners (8) Airbags (9) Door Locks Some safety features do not require any action on your part.
Main Menu Table of Contents Your Car’s Safety Features Seat Belts For your safety, and the safety of your passenger, your car is equipped with seat belts in both seating positions. Your seat belt system also includes a light on the instrument panel to remind you and your passenger to fasten your seat belts. Why Wear Seat Belts Seat belts have proven to be the single most effective safety device.
Main Menu Table of Contents Your Car’s Safety Features Airbags The most important things you need to know about your airbags are: Airbags do not replace seat belts. The seat belts are the occupants’ primary protection in all types of collisions. Airbags supplement seat belts by providing extra protection for occupants’ heads and chests. Airbags offer no protection in side impacts, rear impacts, rollovers, or minor collisions.
Main Menu Table of Contents Your Car’s Safety Features Seats & Seat-Backs Your car’s seats are designed to keep you in a comfortable, upright position so you can take full advantage of the protection offered by seat belts and the energy absorbing materials in the seats. How you adjust your seats and seatbacks can also affect your safety.
Main Menu Table of Contents Your Car’s Safety Features Pre-Drive Safety Checklist To make sure you and your passenger get the maximum protection from your car’s safety features, check the following each time before you drive away: You and any adult passenger, or a larger child who has outgrown child seats, are wearing your seat belts and wearing them properly (see page 15 ). A small child riding in a forwardfacing child seat is properly restrained (see page 26 ).
Main Menu Table of Contents Protecting Adults Introduction The following pages provide instructions on how to properly protect adult occupants. Your car has a door monitor light on the instrument panel to indicate when a specific door is not tightly closed. These instructions also apply to a child whom you have decided is large enough and mature enough to ride as a passenger. (See page 29 for important additional guidelines on how to properly protect larger children.
Main Menu Table of Contents Protecting Adults To reduce the chance of injury, wear your seat belt properly, sit upright with your back against the seat, and move the seat away from the steering wheel to the farthest distance that allows you to maintain full control of the car. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers adjust the seat so the center of the chest is at least 10 inches away from the center of the steering wheel.
Main Menu Table of Contents Protecting Adults A passenger should also adjust the seat-back to an upright position, but as far from the dashboard as possible. A passenger who sits too close to the dashboard could be injured if the airbag inflates. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured.
Main Menu Table of Contents Protecting Adults spreads the forces of a crash over the strongest bones in your upper body. 4.Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Also check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. Improperly positioning the seat belts can cause serious injury or death in a crash.
Main Menu Table of Contents Protecting Adults If a seat belt does not seem to work as it should, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt. Anyone using a seat belt that is not working properly can be seriously injured or killed. Have your Honda dealer check the belt as soon as possible. See page 34 for additional information about your seat belt system and how to take care of your belts. 16 Driver and Passenger Safety 5.
Main Menu Table of Contents Protecting Adults Advice for Pregnant Women Sitting improperly or out of position can result in serious injury or death in a crash. Always sit upright, well back in the seat, with your feet on the floor. Remember, to get the best protection from your car’s airbags and other safety features, you must sit properly and wear your seat belt properly. Pregnant women should also sit upright and as far back as possible from the steering wheel or dashboard.
Main Menu Table of Contents Protecting Adults Additional Safety Precautions Two people should never use the same seat belt. If they do, they could be very seriously injured in a crash. Do not put any accessories on seat belts. Devices intended to improve occupant comfort or reposition the shoulder part of a seat belt can severely compromise the protective capability of the seat belt and increase the chance of serious injury in a crash.
Main Menu Table of Contents Protecting Children Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash. Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt. Children depend on adults to protect them. However, despite their best intentions, many parents and other adults may not know how to properly protect young passengers.
Main Menu Table of Contents Protecting Children Your Car is Not Recommended for Child Passengers We strongly recommend that you do not carry any child in this car. One reason is that your car does not have a back seat, and accident statistics show that a child of any size or age is safer when they are properly restrained in the back seat of a vehicle. In addition, your car has a passenger’s airbag which poses serious risks to children−particularly infants and small children.
Main Menu Table of Contents Protecting Children U.S. Models Canadian Models To remind you of the passenger’s airbag hazards, your car has warning labels hanging from the glove box and on the driver’s and passenger’s visors. Please read and follow the instructions on these labels. To remind you of the airbag hazards, your car has warning labels on the driver’s and passenger’s visors. Please read and follow the instructions on these labels.
Main Menu Table of Contents Protecting Children Additional Safety Precaution Do not leave a child alone in your car. Leaving a child without adult supervision is illegal in most states and Canadian provinces and can be very hazardous. For example, a small child left in a car on a hot day can die from heatstroke. A child left alone with the key in the ignition can accidentally set the car in motion, possibly injuring themselves or others.
Main Menu Table of Contents Protecting Children 2. The child seat should be of the proper type and size to fit the child. 3. The child seat should fit the passenger’s seat. Due to variations in the design of child seats, vehicle seats, and seat belts, all child seats will not fit all seating positions in all cars. Before purchasing a child seat, we recommend that parents test the child seat to make sure it fits properly in the passenger’s seat.
Main Menu Table of Contents Protecting Children Placing a Child Seat This page briefly summarizes Honda’s recommendations on where to place a child seat in your car. Passenger’s Seat Infants: Never in the passenger’s seat, due to the passenger’s airbag hazard. Small children: Not recommended, Airbags Pose Serious Risks to Children The passenger’s airbag inflates with enough force to kill or seriously injure an infant in a rear-facing child seat.
Main Menu Table of Contents Protecting Children Installing a Child Seat After selecting a proper child seat, there are three main steps in installing the seat: 1. Secure the child seat to the car with a seat belt. All child seats must be secured to the car with the lap part of a lap/shoulder belt. A child whose seat is not properly secured to the car can be endangered in a crash. See page 27 for instructions on how to secure a forward-facing child seat in this car. 2.
Main Menu Table of Contents Protecting Children Protecting Small Children If you decide to carry a small child in this car, follow the instructions and guidelines below. Child Seat Type A child who can sit up without support, and who fits within the child seat maker’s weight and height limits, should be restrained in a forward-facing, upright child seat. Of the different seats available, we recommend those that have a fivepoint harness system as shown.
Main Menu Table of Contents Protecting Children Child Seat Installation The passenger’s seat belt has a locking mechanism that must be activated to secure a child seat. The following pages provide instructions and tips on how to secure a forward-facing child seat with this type of seat belt. 1. Move the vehicle seat to the rearmost position. Moving the seat as far back as possible reduces the chance of a child being injured or killed if the passenger’s airbag inflates.
Main Menu Table of Contents Protecting Children Additional Precautions for Small Children Never hold a small child on your lap. If you are not wearing a seat belt in a crash, you could be thrown forward into the dashboard and crush the child. 5. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
Main Menu Table of Contents Protecting Children Protecting Larger Children The passenger’s airbag poses serious risks to children, including those who have outgrown child seats. If the vehicle seat is too far forward, or the child’s head is thrown forward during a collision, or the child is unrestrained or out of position, an inflating airbag can kill or seriously injure the child. For these reasons, we recommend that you do not carry a child passenger.
Main Menu Table of Contents Protecting Children However, if the belt touches or crosses the child’s neck, the child needs to use a booster seat. Do not let a child wear a seat belt across the neck. This could result in serious neck injuries during a crash. Do not let a child put the shoulder part of a seat belt behind the back or under the arm. This could cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.
Main Menu Table of Contents Protecting Children A child may continue using a booster seat until the tops of the ears are even with the top of the seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster. When Can a Larger Child Ride in this Car Children vary widely. And while age may be one indicator of when a child can safely ride in this car, there are other important factors you should consider.
Main Menu Table of Contents Protecting Children If you decide that a child can safely ride in this car, be sure to: Carefully read the owner’s manual and make sure you understand all seat belt instructions and all safety information. Move the vehicle seat to the rearmost position. Have the child sit up straight, back against the seat, and feet on or near the floor. Check that the child’s seat belt is properly positioned and secured. 32 Driver and Passenger Safety Supervise the child.
Main Menu Table of Contents Protecting Children Using Child Seats with Tethers Your car has a tether anchorage point on the trunk lining for securing a tether-style child seat to the car. Since a tether can provide additional security, we recommend using a tether whenever one is required or available. Attach the tether strap hook to the tether anchorage point as shown in the illustration, then tighten the strap according to the child seat maker’s instructions. Make sure the strap is not twisted.
Main Menu Table of Contents Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in both seating positions. The seat belts are also equipped with automatic seat belt tensioners. The system also includes a light on the instrument panel to remind you and your passenger to fasten your belts. If the driver’s seat belt is not fastened before the ignition is turned ON (II), the light will come on and a beeper will also sound.
Main Menu Table of Contents Additional Information About Your Seat Belts If the shoulder part of the belt is pulled all the way out, the locking mechanism will activate. The belt will retract, but it will not allow the passenger to move freely. To deactivate the locking mechanism, unlatch the buckle and let the seat belt fully retract. To refasten the belt, pull it out only as far as needed. See page 15 for instructions on how to wear the lap/shoulder belt properly.
Main Menu Table of Contents Additional Information About Your SRS SRS Components Your Supplemental Restraint System (SRS) includes: Two front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’s airbag is stored in the dashboard. Both are marked ‘‘SRS AIRBAG.’’ Automatic seat belt tensioners that tighten the front seat belts during a moderate to severe frontal collision. Sensors that can detect a moderate to severe frontal collision.
Main Menu Table of Contents Additional Information About Your SRS After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the car as soon as it is safe to do so. During a crash, your seat belt helps restrain your lower body and torso, while the tensioner tightens and locks the seat belt to help keep you in place.
Main Menu Table of Contents Additional Information About Your SRS How the Automatic Seat Belt Tensioners Work How the SRS Indicator Light Works The purpose of the SRS light is to alert you to a potential problem with your Supplemental Restraint System. When you turn the ignition ON (II), this indicator will light briefly then go out. This tells you that the system is working properly. Your Honda has automatic seat belt tensioners for added protection during a moderate to severe frontal collision.
Main Menu Table of Contents Additional Information About Your SRS SRS Service Your Supplemental Restraint System is virtually maintenance-free, and there are no parts you can safely service. However, you must have your car serviced if: Additional Safety Precautions Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection in a moderate to severe frontal collision. Your airbags ever inflate.
Main Menu Table of Contents Carbon Monoxide Hazard Your car’s exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the car in normal driving if you maintain your car properly. Have the exhaust system inspected for leaks whenever: The car is raised for an oil change. You notice a change in the sound of the exhaust. The car was in an accident that may have damaged the underside. 40 Driver and Passenger Safety Carbon monoxide gas is toxic.
Main Menu Table of Contents Safety Labels These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully. SUN VISOR U.S. models Canadian models If a label comes off or becomes hard to read, contact your Honda dealer for a replacement. GLOVE BOX U.S.
Main Menu 42
Main Menu Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your Honda. All the essential controls are within easy reach. Control Locations ............................ 44 Indicator Lights................................ 45 Gauges .............................................. 50 Speedometer ................................ 50 Display Change Button ............... 50 Odometer ......................................
Main Menu Table of Contents Control Locations FCD SELECT BUTTON (P. 54) POWER WINDOW SWITCHES (P. 77) HEATING/COOLING CONTROLS (P. 84, 90) AUDIO SYSTEM (P. 98) DIGITAL CLOCK DOOR LOCK (P. 71) FUEL FILL DOOR RELEASE (P. 119) HOOD RELEASE HANDLE (P. 120) * U.S. model 44 Instruments and Controls DRIVING MODE BUTTONS (CVT)* (P.
Main Menu Table of Contents Indicator Lights SEAT BELT REMINDER LIGHT (P. 47) SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P. 47) TURN SIGNAL AND HAZARD WARNING INDICATORS (P. 48) ELECTRIC POWER STEERING INDICATOR (P. 49) HIGH BEAM INDICATOR (P. 48) PARKING BRAKE AND BRAKE SYSTEM INDICATOR* DOOR-OPEN INDICATOR (P. 48) LOW OIL PRESSURE INDICATOR (P. 47) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR* (P. 48) MALFUNCTION INDICATOR LAMP (P. 48) AUTO IDLE STOP INDICATOR (P. 136) MAINTENANCE REQUIRED INDICATOR (P.
Main Menu Table of Contents Indicator Lights Automatic Transmission (CVT) U.S. model SEAT BELT REMINDER LIGHT (P. 47) SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P. 47) TURN SIGNAL AND HAZARD WARNING INDICATORS (P. 48) ELECTRIC POWER STEERING INDICATOR (P. 49) HIGH BEAM INDICATOR (P. 48) PARKING BRAKE AND BRAKE SYSTEM INDICATOR* DOOR-OPEN INDICATOR (P. 48) LOW OIL PRESSURE INDICATOR (P. 47) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR* (P. 48) MALFUNCTION INDICATOR LAMP (P.
Main Menu Table of Contents Indicator Lights The instrument panel has many indicators to give you important information about your car. Seat Belt Reminder Light This indicator lights when you turn the ignition switch ON (II). It is a reminder to you and your passengers to protect yourselves by fastening the seat belts. A beeper also sounds if you have not fastened your seat belt. If you do not fasten your seat belt, the beeper will stop after a few seconds but the light stays on until you do.
Main Menu Table of Contents Indicator Lights 2. If the indicator remains lit after you have fully released the parking brake while the engine is running, or if it comes on while driving, it can indicate a problem in the brake system. For complete information, see page 230 . Malfunction Indicator Lamp See page 228 . Turn Signal and Hazard Warning Indicators The left or right turn signal light blinks when you signal a lane change or turn.
Main Menu Table of Contents Indicator Lights ‘‘Daytime Running Lights’’ Indicator Canadian models only This indicator lights when you turn the ignition switch to ON (II) with the headlight switch off and the parking brake set. It should go off if you turn on the headlights or release the parking brake. If it comes on at any other time, it means there is a problem with the DRL. There may also be a problem with the high beam headlights.
Main Menu Table of Contents Gauges MAINTENANCE REQUIRED INDICATOR TACHOMETER SPEEDOMETER DISPLAY CHANGE BUTTON FUEL GAUGE TEMPERATURE GAUGE TRIP METER/ODOMETER Speedometer This shows your speed in miles per hour (mph) or kilometers per hour (km/h). 50 Instruments and Controls TRIP BUTTON Display Change Button The Display Change button switches the speedometer reading between miles per hour and kilometers per hour.
Main Menu Table of Contents Gauges Manual Transmission IMA CHARGE/ASSIST GAUGE FUEL MILEAGE DISPLAY AUTO STOP INDICATOR BATTERY LEVEL INDICATOR FUEL CONSUMPTION DISPLAY SELECT BUTTON CURRENT FUEL MILEAGE DISPLAY SHIFT UP INDICATOR TRIP BUTTON DISPLAY CHANGE BUTTON SHIFT DOWN INDICATOR IMA SYSTEM INDICATOR CONTINUED Instruments and Controls 51
Main Menu Table of Contents Gauges Automatic Transmission (CVT) U.S.
Main Menu Table of Contents Gauges Current Fuel Mileage CURRENT FUEL MILEAGE This display shows the current, or instantaneous fuel mileage you are getting. To change the meter reading in the display, push the display change button. (U.S.: miles per hour and mpg, Canada: kilometer per hour and l/100 km) You can turn off this display at any time. See page 55 . Trip Meters To reset a trip meter, display it, then press and hold the Trip button until the numbers reset to 0.0.
Main Menu Table of Contents Gauges Trip Mileage Segment Distance and Fuel Mileage You can use this function to display the distance and average fuel mileage for a segment of a trip. To display the segment distance and fuel mileage, press and release the FCD Select button. The Segment Display indicator will come on to remind you that this is the segment distance and fuel mileage display.
Main Menu Table of Contents Gauges Lifetime Fuel Mileage When the odometer is displayed, the Fuel Mileage display shows the lifetime fuel mileage. This is the average fuel mileage your vehicle has gotten since the last time the display was reset. To reset this display, turn the ignition switch to ON (II). If the engine is running, make sure the transmission is in neutral and the parking brake is set. Use the Trip button to display the odometer.
Main Menu Table of Contents Gauges 5. Use the Trip button to select another mileage display. 6. Press and hold the FCD Select button again to turn off that display. Battery Level Gauge With 5-speed With CVT (U.S. only) BATTERY LEVEL GAUGE 7. Use the Trip button to select the third display. 8. Press and hold the FCD Select button again to turn off that display. Although the displays are turned off, the average fuel mileages continue to be calculated.
Main Menu Table of Contents Gauges If the battery is mostly discharged, the Auto Idle Stop operation is disabled. (See pages 135, 136 ) Charge/Assist Gauge With 5-speed With CVT (U.S. only) IMA CHARGE/ASSIST GAUGE This gauge shows the status of the Integrated Motor Assist. If the indicator is on the left side of the gauge, the IMA battery is being charged. If the indicator is on the right side of the gauge, the IMA is assisting the engine.
Main Menu Table of Contents Gauges MAINTENANCE REQUIRED INDICATOR SPEEDOMETER DISPLAY CHANGE BUTTON TACHOMETER FUEL GAUGE TEMPERATURE GAUGE TRIP METER/ODOMETER Fuel Gauge This shows how much fuel you have. It is most accurate when the car is on level ground. It may show slightly more or less than the actual amount when you are driving on curvy or hilly roads. 58 Instruments and Controls TRIP BUTTON Temperature Gauge This shows the temperature of the engine’s coolant.
Main Menu Table of Contents Gauges Maintenance Required Indicator INDICATOR This indicator reminds you that it is time to take your car in for scheduled maintenance. Refer to the Maintenance Schedules for Normal and Severe Driving Conditions on pages 156 − 160 . When the distance driven since the last scheduled maintenance reaches 6,000 miles (9,600 km), the indicator starts blinking. If you exceed 7,500 miles (12,000 km), the indicator stays on.
Main Menu Table of Contents Controls Near the Steering Wheel The two levers on the steering column contain controls for driving features you use most often. The left lever controls the turn signals, headlights, and high beams. The right lever controls the windshield washers and wipers. POWER WINDOW SWITCHES (P. 77) MIRROR CONTROLS (P. 78) WINDSHIELD WIPERS/WASHERS (P. 63, 64) HAZARD WARNING LIGHTS (P. 65) The hazard warning lights switch is on the dashboard to the right of the center air vents.
Main Menu Table of Contents Controls Near the Steering Wheel Headlights The rotating switch on the left lever controls the lights. Turning this switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the ‘‘ ’’ position turns on the headlights. If you leave the lights on with the ignition switch in ACCESSORY (I) or LOCK (0), you will hear a reminder tone when you open the driver’s door.
Main Menu Table of Contents Controls Near the Steering Wheel Daytime Running Lights Instrument Panel Brightness Canadian models only With the headlight switch off, the high beam headlights come on with reduced brightness when you turn the ignition switch to ON (II) and release the parking brake. They remain on until you turn the ignition off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch.
Main Menu Table of Contents Controls Near the Steering Wheel To signal a lane change, push lightly on the turn signal lever in the proper direction and hold it. The lever will return to the center position as soon as you release it. Turn Signals Windshield Wipers TURN SIGNAL LEVER Signal a turn or lane change with this lever. Push down on the lever to signal a left turn, and up to signal a right turn.
Main Menu Table of Contents Controls Near the Steering Wheel In intermittent, the wipers operate every few seconds. In low speed and high speed, the wipers run continuously. Windshield Washers To operate the wipers in mist mode, push the control lever up from the OFF position. The wipers run at high speed until you release the lever. This gives you a quick way to clear the windshield. 64 Instruments and Controls To clean the windshield, pull back on the wiper control lever.
Main Menu Table of Contents Controls Near the Steering Wheel Rear Window Wiper and Washer Hazard Warning Rear Window Defogger To turn on the rear window wiper, turn the ring clockwise to ON. To also use the rear window washer, turn the ring clockwise past ON. The washer will spray as long as you hold the ring in this position. If you turn the ring counterclockwise from the OFF position, the washer will spray without activating the rear window wiper.
Main Menu Table of Contents Controls Near the Steering Wheel Automatic Operation The rear window defogger turns on automatically when you turn the ignition switch ON (II) if the outside temperature is below 32°F (0°C), or if the engine is at ambient temperature. The light in the button does not light. It will also turn off automatically after 25 minutes. Make sure the rear window is clear and you have good visibility before starting to drive.
Main Menu Table of Contents Keys and Locks Keys KEY NUMBER PLATE MASTER KEY (BLACK) VALET KEY (GREY) The valet key works only in the ignition and the door locks. You can keep the glove box and the hatch locked when you leave your car and the valet key at a parking facility. You should have received a key number plate with your keys. You will need this key number if you ever have to get a lost key replaced. Keep the plate stored in a safe place.
Main Menu Table of Contents Keys and Locks Immobilizer System The Immobilizer System protects your car from theft. A properlycoded master or valet key must be used in the ignition switch for the engine to start. If an improperlycoded key (or other device) is used, the engine’s fuel system is disabled. When you turn the ignition switch to ON (II), the Immobilizer System indicator should come on for a few seconds, then go out.
Main Menu Table of Contents Keys and Locks Ignition Switch LOCK (0) − You can insert or remove the key only in this position. To switch from ACCESSORY to LOCK, you must push the key in slightly as you turn it. The anti-theft lock will lock the steering column when you remove the key. If the front wheels are turned, the antitheft lock may sometimes make it difficult to turn the key from LOCK to ACCESSORY. Firmly turn the steering wheel to the left or to the right as you turn the key.
Main Menu Table of Contents Keys and Locks ACCESSORY (I) − In this position, you can operate the audio system and the accessory power socket. ON (II) − This is the normal key position when driving. All features and accessories on the car are usable. Several of the lights on the instrument panel come on as a test when you turn the ignition switch from ACCESSORY to ON. START (III) − Use this position only to start the engine. The switch returns to ON (II) when you let go of the key.
Main Menu Table of Contents Keys and Locks Door Locks Hatch LOCK TAB Each door has a lock tab next to the inside door handle. Push the tab in to lock the door, and pull it out to unlock. To lock the passenger’s door when getting out of the car, push the lock tab in and close the door. To lock the driver’s door, pull the door handle and push the lock tab in. Release the handle, then close the door. The doors can also be locked and unlocked from the outside with the key.
Main Menu Table of Contents Keys and Locks See page 129 for cargo loading and weight limit information. Keep the hatch closed at all times while driving to avoid damaging the hatch and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard on page 40 . LOCK MASTER KEY To open the hatch, push the lever behind the hatch’s back edge. To close the hatch, push down on the back edge.
Main Menu Table of Contents Keys and Locks Remote Transmitter LED LOCK BUTTON UNLOCK BUTTON PANIC BUTTON You can lock and unlock your car with the remote transmitter. When you push the LOCK button, both doors lock. The side marker lights and taillights flash once. When you push the UNLOCK button once, only the driver’s door unlocks. The parking lights and taillights flash twice. The passenger’s door unlocks when you push the button a second time.
Main Menu Table of Contents Keys and Locks Panic Mode Replacing the Battery Panic mode allows you to remotely activate your car’s security system to attract attention. When activated, the horn will sound, and the exterior lights will flash for about 30 seconds. To activate panic mode, press and hold the PANIC button for about one second. When the remote transmitter’s battery begins to get weak, it may take several pushes on the button to lock or unlock the doors, and the LED will get dim.
Main Menu Table of Contents Keys and Locks BATTERY ROUND COVER Transmitter Care Avoid severe shock to the transmitter, such as dropping or throwing it. Also, protect it from extreme hot or cold temperatures. Clean the transmitter case with a soft cloth. Do not use strong cleaners or solvents that could harm the case. Immersing the transmitter in any liquid will harm the transmitter and cause it to not function properly. Remove the old battery and note the polarity.
Main Menu Table of Contents Seat Adjustments Front Seat Adjustments See pages 12 − 14 for important safety information and warnings about how to properly position seats and seat-backs. Make all seat adjustments before you start driving. To adjust the seat forward and backward, pull up on the lever under the seat cushion’s front edge. Move the seat to the desired position and release the lever. Try to move the seat to make sure it is locked in position.
Main Menu Table of Contents Power Windows Your car’s windows are electricallypowered. Turn the ignition switch to ON (II) to raise or lower either window. MAIN SWITCH Closing a power window on someone’s hands or fingers can cause serious injury. Make sure your passenger is away from the window before closing it. DRIVER’S WINDOW SWITCH There is a master power window control panel on the dashboard.
Main Menu Table of Contents Power Windows, Mirrors The AUTO function only works to lower the driver’s window. To raise the window, you must push the window switch up and hold it until the window reaches the desired position. The MAIN switch controls power to the passenger’s window. With this switch off, the passenger’s window cannot be raised or lowered. The MAIN switch does not affect the driver’s window.
Main Menu Table of Contents Mirrors, Parking Brake, Storage Box Mirrors Parking Brake PARKING BRAKE LEVER Driving the car with the parking brake applied can damage the rear brakes and axles. Storage Box TAB Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. The inside mirror has day and night positions. The night position reduces glare from headlights behind you.
Main Menu Table of Contents Glove Box, Beverage Holder Glove Box Beverage Holder An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt. Always keep the glove box closed while driving. GLOVE BOX Open the glove box by pulling the bottom of the handle. Close it with a firm push. Lock or unlock the glove box with the master key. 80 Instruments and Controls Be careful when you are using the beverage holder.
Main Menu Table of Contents Accessory Power Socket This socket is intended to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps). It will not power an automotive type cigarette lighter element. ACCESSORY POWER SOCKET To use the accessory power socket, pull up the cover. The ignition switch must be in ACCESSORY (I) or ON (II).
Main Menu Table of Contents Interior Light Ceiling Lights Spotlights Cargo Area Light Turn on the spotlight by pushing the button next to each light. Push the button again to turn it off. You can use the spotlights at all times. The cargo area light has a twoposition switch. In the OFF (down) position, the light does not come on. In the ON (up) position, the light comes on when you open the hatch. DOOR ACTIVATED The interior light has a threeposition switch.
Main Menu Comfort and Convenience Features Heating .............................................. 84 What Each Control Does ............ 84 Temperature Control Dial .......... 84 ECON Button ............................... 84 Recirculation Button ................... 84 Rear Window Defogger Button ....................................... 84 Mode Buttons............................... 85 How to Use the System............... 87 To Turn Everything Off ............. 89 Climate Control System ..................
Main Menu Table of Contents Heating Proper use of the Heating system can make the interior comfortable, and keep the windows clear for best visibility. MODE BUTTON ECON BUTTON TEMPERATURE CONTROL DIAL What Each Control Does Fan Control Buttons Press the button to increase the fan’s speed, which increases air flow. Press the button to decrease the fan’s speed. Temperature Control Dial Turning this dial clockwise increases the temperature of the air flow.
Main Menu Table of Contents Heating Mode Buttons Use the MODE buttons to select the vents the air flows from. Some air will flow from the dashboard corner vents in all modes. Air flows from the center and corner vents in the dashboard. Air flow is divided between the vents in the dashboard and the floor vents. Air flows from the floor vents. Air flow is divided between the floor vents and the defroster vents at the base of the windshield. Air flows from the defroster vents at the base of the windshield.
Main Menu Table of Contents Heating Vent Controls CENTER VENT DRIVER’S-SIDE VENT PASSENGER’S-SIDE VENT Open Open Close Close The direction of air flow from the vents in the center and each side of the dashboard is adjustable. To adjust the air flow from the center vent, move the tab up-anddown and side-to-side. 86 Comfort and Convenience Features On the driver’s and passenger’s-side vents, move the vent up-and-down and move the tab side-to-side to adjust the air flow.
Main Menu Table of Contents Heating How to Use the System This section covers how to set up the system controls for ventilation, heating, and defrosting. The engine must be running for the heater to generate hot air. The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. The air conditioning does not rely on engine temperature. It is best to leave the system in Fresh Air mode under almost all conditions.
Main Menu Table of Contents Heating To Heat To Defog and Defrost To warm the interior: To remove fog from the inside of the windows: To remove exterior frost or ice from the windshield and side windows after the car has been sitting out in cold weather: button. 1. Press the 2. Adjust the temperature control dial so the air flow from the defroster vents feels warm. 3. Turn on the rear window defogger to help clear the rear window. 1. Start the engine. button. 2. Press the 3.
Main Menu Table of Contents Heating These settings direct all the air flow to the defroster vents at the base of the windshield and the side window defroster vents. The air flow will get warmer and clear the windows faster as the engine warms up. You can close the side vents with the dial next to each vent. This will send more warm air to the windshield defroster vents. For safety, make sure you have a clear view through all the windows before driving away.
Main Menu Table of Contents Climate Control System The automatic climate control system in your Honda picks the proper combination of air conditioning, heating, and ventilation to maintain the interior temperature you select. The system also adjusts the fan speed and air flow levels. CENTER VENTS DRIVER’S-SIDE VENT The direction of air flow from the vents in the center and each side of the dashboard is adjustable. To adjust the air flow from the center vent, move the tab up-anddown and side-to-side.
Main Menu Table of Contents Climate Control System PASSENGER’S-SIDE VENT Comfort and Convenience Features 91
Main Menu Table of Contents Climate Control System Fully-automatic Operation Auto Button To put the Automatic Climate Control in fully-automatic mode, press the AUTO button and set the desired temperature by turning the temperature control dial. You will see AUTO in the system’s display. The light above the button also shows you which mode, Recirculation or Fresh Air, is selected. When the system is in fully automatic mode, the auto idle stop function will not be activated.
Main Menu Table of Contents Climate Control System Pressing the OFF button shuts the climate control system completely off. Keep the system completely off only for short periods. To keep stale air and mustiness from collecting, you should have the fan running at all times. TEMPERATURE CONTROL DIAL FAN SPEED BUTTON MODE BUTTON Semi-automatic Operation You can manually select various functions of the Climate Control system when it is in AUTO. All other features remain automatically controlled.
Main Menu Table of Contents Climate Control System Recirculation Button This button controls the source of the air going into the system. When the indicator above this button is lit, air from the car’s interior is sent through the system again (Recirculation mode). When the indicator is off, air is brought in from outside the car (Fresh Air mode). You can, for example, manually put the system in recirculation mode when driving through an area of smoke or fumes.
Main Menu Table of Contents Climate Control System Mode Button Use the MODE button to select the vents the air flows from. Some air will flow from the dashboard corner vents in all modes. Each time you press the MODE button, the display shows the mode selected. Press the button four times to see all the modes. Air flow is divided between the floor vents and the defroster vents at the base of the windshield. Air flows from the floor vents.
Main Menu Table of Contents Climate Control System The button directs the main air flow to the windshield for faster defrosting. It also overrides any MODE selection you may have made. When you select , the A/C turns on automatically and the system selects Fresh Air mode. For faster defrosting, manually set the fan speed to high. You can also increase air flow to the windshield by closing the side vents in the dashboard. When this mode is selected, the auto idle stop function will not activate.
Main Menu Table of Contents Climate Control System Sunlight Sensor/Temperature Sensor SUNLIGHT SENSOR TEMPERATURE SENSOR The climate control system has two sensors. A sunlight sensor is located in the top of the dashboard and a temperature sensor is next to the steering column. Do not cover the sensors or spill any liquid on them.
Main Menu Table of Contents Audio System AM/FM/Cassette Stereo Audio System Your Honda’s audio system provides clear reception on both AM and FM bands, while the preset buttons allow you to easily select your favorite stations. The cassette system features Dolby* noise reduction, automatic sensing of chromium-dioxide (CrO2) tape, and auto-reverse for continuous play. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
Main Menu Table of Contents Audio System Operating the Radio The ignition switch must be in ACCESSORY (I) or ON (II) to operate the audio system. Turn the system on by pushing the PWR/ VOL knob. Adjust the volume by turning the PWR/VOL knob. The band and frequency that the radio was last tuned to is displayed. To change bands, press the AM/FM button. On the FM band, ST will be displayed if the station is broadcasting in stereo. Stereo reproduction on AM is not available.
Main Menu Table of Contents Audio System SCAN − The SCAN function samples all the stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. When the system is in the SCAN mode, SCN shows in the display. The system will scan up the band for a station with a strong signal. When it finds one, it will stop and play that station for approximately five seconds.
Main Menu Table of Contents Audio System Preset − You can store the frequencies of your favorite radio stations in the six preset buttons. Each button will store one frequency on the AM band, and two frequencies on the FM band. AM/FM BUTTON To store a frequency: 1. Select the desired band, AM or FM. FM1 and FM2 let you store two frequencies with each Preset button. 2. Use the TUNE or SEEK function to tune the radio to a desired station. 3. Pick the Preset button you want for that station.
Main Menu Table of Contents Audio System Adjusting the Sound Balance/Fader − These two controls adjust the strength of the sound coming from each speaker. The Balance control adjusts the sideto-side strength, while the Fader control adjusts the front-to-back strength. BASS/FADER CONTROL TREBLE/BALANCE CONTROL To adjust the fader, push on the BASS/FADER control knob to get it to pop out. Pull it out slightly farther, and adjust the front-to-back sound to your liking.
Main Menu Table of Contents Audio System Radio Frequencies and Reception For information, See page 112 . CLOCK BUTTON Audio System Lighting You can use the instrument panel brightness control buttons to adjust the illumination of the audio system (see page 62 ). The audio system illuminates when the parking lights are on, even if the radio is turned off. Digital Clock The audio system usually shows the time when the ignition switch is in ACCESSORY (I) or ON (II).
Main Menu Table of Contents Audio System You can use the RESET (Preset 6) button to quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing RESET sets the clock back to the previous hour. If the displayed time is after the half hour, pressing RESET sets the clock forward to the beginning of the next hour.
Main Menu Table of Contents Audio System Dolby noise reduction turns on when you insert a cassette. If the tape was not recorded with Dolby noise reduction, turn it off by pressing the button. When the system reaches the end of the tape, it will automatically reverse direction and play the other side. If you want to remove the cassette from the drive, press the EJECT button. Tape Search Functions With a cassette playing, you can use the FF, REW, SKIP, or REPEAT function to find a desired program.
Main Menu Table of Contents Audio System REPEAT − The Repeat function continuously replays the current song or passage. Press the RPT button to activate it; you will see RPT displayed as a reminder. When the system reaches the end of the song or passage currently playing, it will automatically go into rewind. When it senses the beginning of the same song or passage, the system returns to PLAY mode. It will continue to repeat this same program until you deactivate REPEAT by pressing the button again.
Main Menu Table of Contents Audio System The SKIP and REPEAT functions use silent periods on the tape to find the end of a song or passage. These features may not work to your satisfaction if there is almost no gap between selections, a high noise level between selections, or a silent period in the middle of a selection. EJECT BUTTON RPT BUTTON CASSETTE SLOT REW BUTTON TAPE DIRECTION INDICATOR FF BUTTON Caring for Cassettes Damaged cassettes can jam inside the drive or cause other problems.
Main Menu Table of Contents Audio System Operating the Optional CD Changer A Compact Disc changer is available from your dealer. It holds up to six discs, providing several hours of continuous entertainment. You operate the CD changer with the same controls used for the radio and cassette player. TAPE/CD BUTTON RANDOM INDICATOR AM/FM BUTTON REPEAT INDICATOR Using the instructions that came with the changer, load the desired CDs in the magazine, and load the magazine in the changer.
Main Menu Table of Contents Audio System To operate the CD changer, the ignition must be in ACCESSORY (I) or ON (II) and the audio system must be on. Press the CD button until ‘‘CD’’ appears in the display. The system will start to play the first track of the first disc in the magazine. Play only standard round discs. When that disc ends, the next disc in the magazine is loaded and played. After the last disc finishes, the system returns to disc 1.
Main Menu Table of Contents Audio System If the system is in Repeat mode, you must turn it off by pressing RPT before you can select Random Play. Then press the button again until you see RDM displayed. AM/FM BUTTON RANDOM INDICATOR TAPE/CD BUTTON To take the system out of CD mode, press the AM/FM button or insert a cassette in the player. If a tape is already in the cassette player, press the TAPE button. When you return to CD mode, play will continue at the same disc and track.
Main Menu Table of Contents Audio System CD Changer Error Indications If you see an error indication in the display while operating the CD changer, find the cause in the chart to the right. If you cannot clear the error indication, take the car to your Honda dealer. Indication Cause Disc-changer malfunction. CD magazine ejection impossible. Disc is in changer mechanism. High temperature. Misconnection or disconnection of CD changer. No CD magazine in the CD changer. No CD in magazine.
Main Menu Table of Contents Audio System Radio Frequencies Your Honda’s radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kilohertz FM band: 87.7 to 107.9 megahertz Radio stations on the AM band are assigned frequencies at least ten kilohertz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 megahertz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
Main Menu Table of Contents Audio System Electrical interference from passing vehicles and stationary sources can cause temporary reception problems. As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills.
Main Menu Table of Contents Audio System Protecting Compact Discs Handle a CD by its edges; never touch either surface. Do not place stabilizer rings or labels on the CD. These, along with contamination from fingerprints, liquids, and felt-tip pens, can cause the CD to not play properly, or possibly jam in the drive. When a CD is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep CDs out of direct sunlight and extreme heat.
Main Menu Table of Contents Audio System Caring for the Cassette Player The cassette player picks up dirt and oxides from the tape. This contamination builds up over time and causes the sound quality to degrade. To prevent this, you should clean the player after every 30 hours of use. Your dealer has a cleaning kit available. If you do not clean the cassette player regularly, it may eventually become impossible to remove the contamination with a normal cleaning kit. Use 100-minute or shorter cassettes.
Main Menu 116
Main Menu Before Driving Before you begin driving your Honda, you should know what gasoline to use, and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your car, please read the information in this section first. Break-in Period .............................. 118 Gasoline .......................................... 118 Service Station Procedures ..........
Main Menu Table of Contents Break-in Period, Gasoline Break-in Period Help assure your car’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Avoid hard braking. New brakes need to be broken-in by moderate use for the first 200 miles (300 km). Do not change the oil until the recommended time or mileage interval shown in the maintenance schedule.
Main Menu Table of Contents Service Station Procedures Filling the Fuel Tank Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. PULL Stop the engine and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately. 1. Because the fuel fill cap is on the passenger’s side of the car, park with that side closest to the service station pumps. 3. Remove the fuel fill cap slowly.
Main Menu Table of Contents Service Station Procedures 5. Screw the fuel fill cap back on, tighten it until it clicks several times. If you do not properly tighten the cap, the Malfunction Indicator Lamp may come on (see page 228 ). Opening the Hood 6. Push the fuel fill door closed until it latches. HOOD RELEASE HANDLE 1. Shift to Park or Neutral and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly.
Main Menu Table of Contents Service Station Procedures If you can open the hood without lifting the hood latch handle, or the hood latch handle moves stiffly or does not spring back as before, the mechanism should be cleaned and lubricated (see page 182 ). SUPPORT ROD After closing the hood, make sure it is securely latched. CLIP 3. Pull the support rod out of its clip and insert the end into the hole on the left side of the hood.
Main Menu Table of Contents Service Station Procedures Oil Check DIPSTICK Check the engine oil level every time you fill the car with fuel. Wait a few minutes after turning the engine off before you check the oil. 1. Remove the dipstick (orange handle). 122 Before Driving 2. Wipe the dipstick with a clean cloth or paper towel. 3. Insert it all the way back in its tube.
Main Menu Table of Contents Service Station Procedures Engine Coolant Check RESERVE TANK Refer to Owner Maintenance Checks on page 163 for information on checking other items in your Honda. MAX UPPER MARK LOWER MARK 4. Remove the dipstick again and check the level. It should be between the upper and lower marks. If it is near or below the lower mark, see Adding Oil on page 165 . MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines.
Main Menu Table of Contents Fuel Economy The condition of your car and your driving habits are the two most important things that affect the fuel mileage you get. Vehicle Condition Always maintain your car according to the maintenance schedule. This will keep it in top operating condition. An important part of that maintenance is the Owner Maintenance Checks (see page 163 ). For example, an underinflated tire causes more ‘‘rolling resistance,’’ which uses fuel.
Main Menu Table of Contents Fuel Economy A cold engine uses more fuel than a warm engine. It is not necessary to ‘‘warm-up’’ a cold engine by letting it idle for a long time. You can drive away in about a minute, no matter how cold it is outside. The engine will warm up faster, and you get better fuel economy. To cut down on the number of ‘‘cold starts,’’ try to combine several short trips into one. The air conditioning puts an extra load on the engine which makes it use more fuel.
Main Menu Table of Contents Accessories and Modifications Modifying your car, or installing some non-Honda accessories, can make your car unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Accessories Your dealer has genuine Honda accessories that allow you to personalize your car. These accessories have been designed and approved for your car, and are covered by warranty. Non-Honda accessories are usually designed for universal applications.
Main Menu Table of Contents Accessories and Modifications Modifications Do not remove any original equipment or modify your car in any way that would alter its design or operation. This could make your car unsafe and illegal to drive. In addition, any modifications that decrease ground clearance increase the chance of undercarriage parts striking a curb, speed bump, or other raised object, which could cause your airbags to deploy.
Main Menu Table of Contents Carrying Cargo Your car has several convenient storage areas so you can stow cargo safely. STORAGE BOX The glove box, rear center pocket and seat-back pocket are designed for small, lightweight items. The cargo area is intended for larger, heavier items. However, carrying too much cargo, or improperly storing it, can affect your car’s handling, stability, and operation and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
Main Menu Table of Contents Carrying Cargo Load Limit The maximum load for your vehicle is 400 lbs (185 kg). This figure includes the total weight of all occupants, cargo, and accessories. To figure out how much cargo you can carry: Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed. Follow all load limits and other loading guidelines in this manual. Add up the weight of all occupants. Subtract the total from 400 lbs (185 kg).
Main Menu Table of Contents Carrying Cargo If you carry large items that prevent you from closing the hatch, exhaust gas can enter the passenger area. To avoid the possibility of carbon monoxide poisoning, follow the instructions on page 40 . The floor of the storage box is made of a soft plastic material. It is not strong enough to stand heavy goods on it. Cargo Hooks To secure the cargo, you can use the four cargo hooks on the cargo area. The illustration shows the location of each cargo hook.
Main Menu Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual transmission. It also includes important information on parking your car, and the braking system. Preparing to Drive ......................... 132 Starting the Engine........................ 133 Starting in Cold Weather at High Altitude ..................... 133 5-speed Manual Transmission ..... 134 Auto Idle Stop............................. 135 Shift Up/Shift Down Indicators .....
Main Menu Table of Contents Preparing to Drive You should do the following checks and adjustments every day before you drive your car. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 2. Check that the hood and hatch are fully closed. 3. Visually check the tires. If a tire looks low, use a gauge to check its pressure. 4. Check that any items you may be carrying with you inside are stored properly or fastened down securely. 132 Driving 5.
Main Menu Table of Contents Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual Transmission: Push the clutch pedal down all the way. START (III) does not function unless the clutch pedal is depressed. Automatic Transmission: Make sure the shift lever is in Park. Press on the brake pedal. 4. Without touching the accelerator pedal, turn the ignition key to the START (III) position.
Main Menu Table of Contents 5-speed Manual Transmission Come to a full stop before you shift into Reverse. You can damage the transmission by trying to shift into Reverse with the car moving. Push down the clutch pedal, and pause for a few seconds before shifting into Reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’ The manual transmission is synchronized in all forward gears for smooth operation.
Main Menu Table of Contents 5-speed Manual Transmission Auto Idle Stop To maximize fuel economy, your Insight has an Auto Idle Stop function. Under certain conditions, the engine will shut off when you come to a stop. Those conditions are: The engine coolant is nearly up to normal operating temperature. The vehicle’s speed is below 19 mph (30 km/h) and you are pressing on the brake pedal to come to a stop. You depress the clutch pedal. You are not pressing on the accelerator pedal.
Main Menu Table of Contents 5-speed Manual Transmission Auto Idle Stop Indicator engine with the ignition switch when this light is blinking. AUTO IDLE STOP INDICATOR This indicator will blink, and you will hear a chime, if you open the door when Auto Stop is active. Always turn the ignition switch to LOCK (0) and remove the key if you are getting out of the vehicle. This indicator comes on as a reminder that the engine has stopped because of the Auto Idle Stop function.
Main Menu Table of Contents 5-speed Manual Transmission Shift Up/Shift Down Indicators SHIFT UP INDICATOR losing speed, and pressing on the accelerator pedal. Road and traffic conditions may require you to shift at times other than those indicated. SHIFT DOWN INDICATOR Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out.
Main Menu Table of Contents Automatic Transmission (CVT) Continuously Variable Transmission (CVT) Shift Lever Position Indicator Shift Lever Positions This indicator on the instrument panel shows which position the shift lever is in. The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch ON (II). If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.
Main Menu Table of Contents Automatic Transmission (CVT) To shift from: P to R R to P N to R D to L N to D D to N L to D R to N Do this: Press the brake pedal and press the release button on the lever. Press the release button on the lever. Move the lever. Park (P) − This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine.
Main Menu Table of Contents Automatic Transmission (CVT) Reverse (R) − To shift from Reverse to Park, see the explanation under Park. To shift to Reverse from Neutral, come to a complete stop first. Press the release button before shifting into Reverse from Neutral. Neutral (N) − Use Neutral if you need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Always shift to Park position if you need to leave the vehicle for any reason.
Main Menu Table of Contents Automatic Transmission (CVT) ‘‘D’’ INDICATOR ‘‘S’’ INDICATOR Second (S) Mode − In this mode, the transmission selects a wider range of ratios to give better acceleration. Use this mode for driving up or downhill. Push the Second mode button on the steering wheel to select Second mode. Along with the ‘‘D’’ indicator, the ‘‘S’’ indicator comes on as a reminder. To change from Second (S) mode to Drive mode, push the Drive mode button.
Main Menu Table of Contents Automatic Transmission (CVT) Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work. RELEASE BUTTON 1. Set the Parking brake. 2. Remove the key from the ignition switch. COVER 3. Put a cloth on the edge of the Shift Lock Release slot cover next to the shift lever.
Main Menu Table of Contents Automatic Transmission (CVT) Auto Idle Stop To maximize fuel economy, your Insight has an Auto Idle Stop function. Under certain conditions, the engine will shut off when you come to a stop. Those conditions are: The engine coolant is nearly up to normal operating temperature. The shift lever is in D or N. You are not pressing on the accelerator pedal. The IMA battery is sufficiently charged (at least 1/3 on the Battery Level Gauge).
Main Menu Table of Contents Automatic Transmission (CVT) Auto Idle Stop Indicator AUTO IDLE STOP INDICATOR If you open the driver’s door when Auto Stop is active, the indicator will blink and you will hear a chime. The chime will stop when you close the door. Always turn the ignition switch to LOCK (0) and remove the key if you are getting out of the vehicle. The indicator blinks as a reminder that the engine has stopped because of the Auto Idle Stop function.
Main Menu Table of Contents Parking Always use the parking brake when you park your car. The indicator on the instrument panel shows that the parking brake is not fully released; it does not indicate that the parking brake is firmly set. Make sure the parking brake is set firmly or your car may roll if it is parked on an incline. If the car is facing uphill, turn the front wheels away from the curb. If you have a manual transmission, put it in first gear. Parking Tips Make sure the windows are closed.
Main Menu Table of Contents The Braking System Your Honda is equipped with front disc brakes and rear drum brakes. The braking system is powerassisted to reduce the effort needed on the brake pedal. Put your foot on the brake pedal only when you intend to brake. Resting your foot on the pedal keeps the brakes applied lightly, causing them to build up heat. Heat build-up can reduce how well your brakes work. It also keeps your brake lights on all the time, confusing drivers behind you.
Main Menu Table of Contents The Braking System Brake System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels. Front Anti-lock Brakes Your car has an Anti-lock Brake System (ABS) as standard equipment.
Main Menu Table of Contents The Braking System Important Safety Reminders ABS does not reduce the time or distance it takes to stop the car, it only helps with steering control during braking. You should always maintain a safe following distance from other vehicles. ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe, prudent speed for the road and weather conditions.
Main Menu Table of Contents Driving in Bad Weather Rain, fog, and snow conditions require a different driving technique because of reduced traction and visibility. Keep your car wellmaintained and exercise greater caution when you need to drive in bad weather. Driving Technique − Always drive slower than you would in dry weather. It takes your car longer to react, even in conditions that may seem just barely damp. Apply smooth, even pressure to all the controls.
Main Menu Table of Contents Driving in Bad Weather, Towing a Trailer Traction − Check your tires frequently for wear and proper pressure. Both are important in preventing ‘‘hydroplaning’’ (loss of traction on a wet surface). In the winter, mount snow tires on all four wheels for the best handling. Watch road conditions carefully, they can change from moment to moment. Wet leaves can be as slippery as ice. ‘‘Clear’’ roads can have patches of ice.
Main Menu Maintenance This section explains why it is important to keep your car well maintained and to follow basic maintenance safety precautions. This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself. If you have the skills and tools to perform more complex maintenance tasks on your Honda, you may want to purchase the Service Manual.
Main Menu Table of Contents Maintenance Safety Regularly maintaining your car is the best way to protect your investment. Proper maintenance is essential to your safety and the safety of your passengers. It will also reward you with more economical, trouble-free driving and help reduce air pollution. Improperly maintaining this car or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Main Menu Table of Contents Maintenance Safety Important Safety Precautions Before you begin any maintenance, make sure your car is parked on level ground and that the parking brake is set. Also, be sure the engine is off. This will help to eliminate several potential hazards: Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine. Burns from hot parts. Let the engine and exhaust system cool before touching any parts.
Main Menu Table of Contents Maintenance Schedule The Maintenance Schedule specifies how often you should have your car serviced and what things need attention. It is essential that you have your car serviced as scheduled to retain its high level of safety, dependability, and emissions control performance. The services and time or distance intervals shown in the maintenance schedule assume you will use your car as normal transportation for passengers and their possessions.
Main Menu Table of Contents Maintenance Schedule Your authorized Honda dealer knows your car best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record. Check your warranty booklet for more information.
Maintenance Schedule for Normal Conditions Main Menu Table of Contents Service at the indicated distance or time − whichever comes first.
Main Menu Table of Contents 7,500 mi/12,000 km 15,000 mi/24,000 km/1 yrs 22,500 mi/36,000 km 30,000 mi/48,000 km/2 yrs 37,500 mi/60,000 km 3yrs 45,000 mi/72,000 km/3 yrs 52,500 mi/84,000 km 60,000 mi/96,000 km/4 yrs 67,500 mi/108,000 km 75,000 mi/120,000 km/5 yrs 82,500 mi/132,000 km 6yrs 90,000 mi/144,000 km/6 yrs 97,500 mi/156,000 km 105,000 mi/168,000 km/7 yrs 112,500 mi/180,000 km 120,000 mi/192,000 km/6 yrs 120,000 mi/192,000 km/8 yrs 120,000 mi/192,000 km/10 yrs then every 60,000 miles (96,000 km)
Maintenance Schedule for Severe Conditions Main Menu Table of Contents Service at the indicated miles x 1,000 distance or time − whichever km x 1,000 comes first.
Main Menu Table of Contents 3,750 mi/6,000 km/7,500 mi/12,000 km/6 mos 11,250 mi/18,000 km/15,000 mi/24,000 km/1 yr 18,750 mi/30,000 km/22,500 mi/36,000 km/1½ yrs 26,250 mi/42,000 km/30,000 mi/48,000 km/2 yrs 33,750 mi/54,000 km/37,500 mi/60,000 km/2½ yrs 41,250 mi/66,000 km/3yrs 45,000 mi/72,000 km/3 yrs 48,750 mi/78,000 km/52,500 mi/84,000 km/3½ yrs 56,250 mi/90,000 km/60,000 mi/96,000 km/3 yrs 60,000 mi/96,000 km/4 yrs 63,750 mi/102,000 km/- Do items in A. Do items in A, B. Do items in A.
Maintenance Schedule for Severe Conditions (listed by distance/time) Main Menu Table of Contents 67,500 mi/108,000 km/4½ yrs 71,250 mi/114,000 km/75,000 mi/120,000 km/5 yrs 78,750 mi/126,000 km/82,500 mi/132,000 km/5½ yrs 86,250 mi/138,000 km/6yrs 90,000 mi/144,000 km/6 yrs 93,750 mi/150,000 km/97,500 mi/156,000 km/6½ yrs 101,250 mi/162,000 km/105,000 mi/168,000 km/7 yrs 108,750 mi/174,000 km/112,500 mi/180,000 km/7½ yrs 116,250 mi/186,000 km/120,000 mi/192,000 km/6 yrs 120,000 mi/192,000 km/8 yrs 120,00
Main Menu Table of Contents Required Maintenance Record (for Normal and Severe Schedules) You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 156 ) or severe conditions (page 158 ). Keep the receipts for all work done on your vehicle.
Main Menu Table of Contents Required Maintenance Record (for Normal and Severe Schedules) 63,750 mi 102,000 km Signature or dealer stamp mi/km 93,750 mi 150,000 km Date 67,500 mi 108,000 km (or 4½ years) mi/km 71,250 mi 114,000 km mi/km Date mi/km 78,750 mi 126,000 km mi/km Date 97,500 mi 156,000 km (or 6½ years) mi/km 101,250 mi 162,000 km mi/km mi/km 86,250 mi 138,000 km mi/km Date 105,000 mi 168,000 km (or 7 years) mi/km 108,750 mi 174,000 km mi/km 162 Maintenance mi/km Date
Main Menu Table of Contents Owner Maintenance Checks You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the page given. Engine oil level − Check every time you fill the fuel tank. See page 122 . Engine coolant level − Check the radiator reserve tank every time you fill the fuel tank. See page 123 . Windshield washer fluid − Check the level in the reservoir monthly.
Main Menu Table of Contents Fluid Locations ENGINE OIL FILL CAP CLUTCH FLUID (Gray cap) BRAKE FLUID (Gray cap) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR AUTOMATIC TRANSMISSION FLUID DIPSTICK (CVT) (Yellow loop) ENGINE OIL DIPSTICK (Orange loop) 164 Maintenance RADIATOR CAP
Main Menu Table of Contents Engine Oil Adding Oil ENGINE OIL FILL CAP Recommended Oil Oil is major contributor to your engine’s performance and longevity. Always use a premium-grade detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements. It is highly recommended that you use Honda Motor Oil in your vehicle for as long as you own it.
Main Menu Table of Contents Engine Oil The numbers on the container’s label tell you the oil’s viscosity or weight. Select the oil for your car according to this chart. Ambient Temperature A very low-viscosity, fuel-efficient 0W-20 oil is the preferred engine lubricant for your Insight. This special oil is formulated to help your engine use less fuel. It is available at your Honda dealer. A 5W-20 or 5W-30 oil may be used if 0W-20 is not available.
Main Menu Table of Contents Engine Oil Changing the Oil and Filter Always change the oil and filter according to the time and distance (miles/kilometers) recommendations in the maintenance schedule. The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the car. The car should be raised on a service station-type hydraulic lift for this service.
Main Menu Table of Contents Engine Oil 5. Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten it to: 29 lbf·ft (39 N·m , 4.0 kgf·m) 6. Refill the engine with the recommended oil. Engine oil change capacity (including filter): 2.6 US qt (2.5 , 2.2 Imp qt) OIL FILTER 3. Remove the oil filter and let the remaining oil drain. A special wrench (available from your Honda dealer) is required to remove the filter. 4. Install a new oil filter according to instructions that come with it.
Main Menu Table of Contents Cooling System Adding Engine Coolant RESERVE TANK If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. This coolant should always be a mixture of 50 percent antifreeze and 50 percent water. Never add straight antifreeze or plain water. Always use Honda All Season Antifreeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent water.
Main Menu Table of Contents Cooling System RADIATOR CAP 1. Make sure the engine and radiator are cool. 2. Turn the radiator cap counterclockwise, without pressing down on it, until it stops. This relieves any pressure remaining in the cooling system. 3. Remove the radiator cap by pushing down and turning counterclockwise. 170 Maintenance RESERVE TANK 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. 5. Put the radiator cap back on. Tighten it fully. 6.
Main Menu Table of Contents Cooling System Replacing Engine Coolant The cooling system should be completely drained and refilled with new coolant according to the time and distance recommendations in the maintenance schedule. Only use Honda All Season Antifreeze/ Coolant Type 2. Draining the coolant requires access to the underside of the car. Unless you have the tools and knowledge, you should have this maintenance done by a skilled mechanic. 1. Turn the ignition ON (II).
Main Menu Table of Contents Cooling System RESERVE TANK CAP DRAIN BOLT 4. Loosen the drain plug on the bottom of the radiator. The coolant will drain through the splash guard. Remove the drain bolt and washer from the engine block. 172 Maintenance RESERVE TANK HOLDER 5. Remove the reserve tank from its holder by pulling it straight up. Drain the coolant, then put the tank back in its holder.
Main Menu Table of Contents Cooling System 6. When the coolant stops draining, tighten the drain plug at the bottom of the radiator. Apply non-hardening sealant to the drain bolt threads, put a new washer on the drain bolt, and reinstall the bolt in the engine block. Tighten it securely. Tightening torque: 61 lbf·ft (83 N·m , 8.5 kgf·m) 7. Remove the engine cover. 8. Loosen the bleeder bolt on top of the engine. Pour Honda All Season Antifreeze/Coolant Type 2 into the radiator.
Main Menu Table of Contents Cooling System 14.Start the engine and let it run for about 30 seconds. Then turn off the engine. 15.Pour coolant into the radiator up to the base of the filler neck. 174 Maintenance 16.Fill the reserve tank to the MAX mark. Install the reserve tank cap.
Main Menu Table of Contents Windshield Washers Check the level in the windshield washer reservoir at least monthly during normal usage. In bad weather, when you use the washers often, check the level every time you stop for fuel. This reservoir supplies the windshield and rear window washers. LEVEL GAUGE Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.
Main Menu Table of Contents Transmission Fluid 3. Insert the dipstick all the way into the transmission securely as shown in the illustration. Automatic Transmission (CVT) U.S. model 4. Remove the dipstick and check the fluid level. It should be between the HOT upper and lower marks. UPPER MARK LOWER MARK HOT DIP STICK 1. Park the car on level ground. With the A/C off, let the engine run until the radiator cooling fan cycles on and off twice. Then turn off the engine.
Main Menu Table of Contents Transmission Fluid 5. If the level is below the lower mark, add fluid into the filler hole to bring it to the upper mark. Always use Honda ATF-Z1 (Automatic Transmission Fluid). If it is not available, you may use a DEXRON III automatic transmission fluid as a temporary replacement. However, continued use can affect shift quality. Have the transmission flushed and refilled with Honda ATF-Z1 as soon as it is convenient.
Main Menu Table of Contents Transmission Fluid If Honda MTF is not available, you may use an API service SG, SH or SJ grade motor oil with a viscosity of SAE 10W-30 or 10W-40 as a temporary replacement. An SG grade is preferred, but an SH or SJ grade may be used if SG is not available. However, motor oil does not contain the proper additives and continued use can cause stiffer shifting. Replace as soon as it is convenient.
Main Menu Table of Contents Brake and Clutch Fluid Check the fluid level in the reservoirs monthly. There are up to two reservoirs, depending on the model. They are: Brake fluid reservoir (all models) Clutch fluid reservoir (manual transmission only) The brake fluid should be replaced according to the time and distance recommendations in the maintenance schedule. Always use Honda Heavy Duty Brake Fluid DOT 3.
Main Menu Table of Contents Brake and Clutch Fluid Clutch System MAX MIN The fluid should be between the MIN and MAX marks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level. Use the same fluid specified for the brake system. Low fluid level can indicate a leak in the clutch system. Have this system inspected as soon as possible.
Main Menu Table of Contents Air Cleaner Element The air cleaner element should be replaced according to the time and distance recommendations in the maintenance schedule. Replacement CLIPS AIR CLEANER ELEMENT The air cleaner element is inside the air cleaner housing in the engine compartment. 3. Carefully clean the inside of the air cleaner housing with a damp rag. To replace it: 4. Place the new air cleaner element in the air cleaner housing. 1.
Main Menu Table of Contents Hood Latch PIVOTS Clean the hood latch assembly with a mild cleaner, then lubricate it with a multipurpose grease. Lubricate all the moving parts (as shown), including the pivot. Follow the time and distance recommendations in the Maintenance Schedule. If you are not sure how to clean and grease the latch, contact your Honda dealer.
Main Menu Table of Contents Battery Check the condition of your car’s battery monthly. You should check the color of the test indicator window, and for corrosion on the terminals. TEST INDICATOR WINDOW Check the battery condition by looking at the test indicator window on the battery. The label on the battery explains the test indicator’s colors. Check the battery terminals for corrosion (a white or yellowish powder). To remove it, cover the terminals with a solution of baking soda and water.
Main Menu Table of Contents Battery If you need to connect the battery to a charger, disconnect both cables to prevent damage to the car’s electrical system. The battery gives off explosive hydrogen gas during normal operation. If the terminals are severely corroded, clean them with baking soda and water. Then use a wrench to loosen and remove the cables from the terminals. Always disconnect the negative (−) cable first and reconnect it last.
Main Menu Table of Contents Wiper Blades Check the condition of the wiper blades at least every six months. Look for signs of cracking in the rubber, or areas that are getting hard. Replace the blades if you find these signs, or if they leave streaks and unwiped areas when used. WIPER ARMS LOCK TAB To replace the blade: 1. Raise the wiper arm off the windshield. 2. Disconnect the blade assembly from the wiper arm by pushing in the lock tab.
Main Menu Table of Contents Wiper Blades BLADE BLADE 5. Slide the new wiper blade into the holder until the tabs lock. 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm down against the windshield. REINFORCEMENT 3. Remove the blade from its holder by grasping the tabbed end of the blade. Pull firmly until the tabs come out of the holder. 186 Maintenance 4. Examine the new wiper blades.
Main Menu Table of Contents Wiper Blades 3. Slide the blade out of the holder. 4. Slide the new blade into the holder. Make sure it is engaged in the slot along its full length. To replace the rear wiper blade: 1. Raise the wiper arm off the windshield. 2. Pull one end of the blade out from the holder. 5. Insert both ends of the blade into the holder. Make sure they are secure. 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm.
Main Menu Table of Contents Air Conditioning System (Optional) Your car’s air conditioning is a sealed system. Any major maintenance, such as recharging, should be done by a qualified mechanic. You can do a couple of things to make sure the air conditioning works efficiently. Periodically check the engine’s radiator and air conditioning condenser for leaves, insects, and dirt stuck to the front surface. These block the air flow and reduce cooling efficiency.
Main Menu Table of Contents Dust and Pollen Filter, Drive Belt Dust and Pollen Filter The dust and pollen filter removes pollen and dust from the outside air the heating and cooling system brings into the interior. It should be replaced according to the time and distance recommendations in the maintenance schedule. This filter should be replaced every 30,000 miles (48,000 km) under normal conditions.
Main Menu Table of Contents Tires To safely operate your car, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed information on how and when to check air pressure, how to inspect your tires for damage and wear, and what to do when your tires need to be replaced. Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Main Menu Table of Contents Tires You should get your own tire pressure gauge and use it whenever you check your tire pressures. This will make it easier for you to tell if a pressure loss is due to a tire problem and not due to a variation between gauges. Recommended Tire Pressures for Normal Driving These pressures are also given on the tire information label on the driver’s doorjamb. Tubeless tires have some ability to self-seal if they are punctured.
Main Menu Table of Contents Tires Inspection Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear. INDICATOR LOCATION MARKS You should look for: Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions. Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord. Excessive tread wear.
Main Menu Table of Contents Tires Tire Rotation Front Front (For Non-directional (For Directional Tires and Wheels) Tires and Wheels) When shopping for replacement tires, you may find that some tires are ‘‘directional.’’ This means they are designed to rotate only in one direction. If you use directional tires, they should be rotated only front-toback.
Main Menu Table of Contents Tires Wheels and Tires Installing improper tires on your car can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Wheels: 14 x 5 1/2 JJ Always use the size and type of tires recommended in this owner’s manual. See page 244 for information about DOT Tire Quality Grading. It is best to replace all four tires at the same time.
Main Menu Table of Contents Tires Snow Tires Tire Chains If you mount snow tires on your Honda, make sure they are radial tires of the same size and load range as the original tires. Mount snow tires on all four wheels to balance your car’s handling in all weather conditions. Keep in mind the traction provided by snow tires on dry roads may not be as high as your car’s original equipment tires. You should drive cautiously even when the roads are clear.
Main Menu Table of Contents Lights Check the operation of your car’s exterior lights at least once a month. A burned out bulb can create an unsafe condition by reducing your car’s visibility and the ability to signal your intentions to other drivers.
Main Menu Table of Contents Lights Check the following: HIGH-MOUNT BRAKE LIGHT STOP/TAILLIGHT Headlights (low and high beam) Parking lights Taillights Brake lights High-mount brake light Turn signals Back-up lights Hazard light function License plate light Side marker lights Daytime running lights (Canadian models) If you find any bulbs are burned out, replace them as soon as possible. Refer to the chart on page 243 to determine what type of replacement bulb is needed.
Main Menu Table of Contents Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area, readjustment may be required. Adjustment of the headlights should be performed by a Honda technician or other qualified mechanic. Replacing a Headlight Bulb Your car has halogen headlight bulbs, one on each side. When replacing a bulb, handle it by its steel base and protect the glass from contact with your skin or hard objects.
Main Menu Table of Contents Lights 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way and remove the bulb. Replacing the Front Parking Lights 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place and clip the end into the slot. 5. Test the lights to make sure the new bulb is working. 6. Install the rubber seal over the back of the headlight assembly. Make sure it is right side up; it is marked ‘‘TOP.’’ 7.
Main Menu Table of Contents Lights 6. Install the new bulb in the socket. Turn it clockwise to lock it in place. 7. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 8. Test the lights to make sure the new bulb is working. 9. Put the inner fender cover in place. Tighten the screw securely. 2. Use a Phillips-head screwdriver to remove the screw from the top of the fender. 4.
Main Menu Table of Contents Lights Replacing Rear Bulbs COVER 1. Open the hatch. 2. Pull the cover back. 3. Loosen the nut holding the rear light assembly. 4. Remove the two covers. Remove the two screws holding the rear light assembly. Remove the light assembly. 5. Determine which bulb, stop/ taillight, back-up light, side marker light or turn signal is burned out. Remove the socket for that bulb by turning counterclockwise. 6. Pull the bulb straight out of its socket. 7.
Main Menu Table of Contents Lights 8. Reinstall the socket into the light assembly by turning it clockwise until it locks. Replacing a Rear License Plate Bulb 9. Test the lights to make sure the new bulb is working. 10.Reinstall the light assembly and tighten the two screws and nut. 11.Reinstall the two covers. 1. Use a Phillips-head screwdriver to remove the two screws holding the license plate light lens. 202 Maintenance 2. Pull the bulb straight out of its socket. 3.
Main Menu Table of Contents Lights Replacing an Interior Light Bulb Replacing the Cargo Area Light INTERIOR LIGHT 1. Remove the lens by carefully prying on the edge of the lens in the middle with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. 1. Remove the lens by carefully prying on the edge of the lens in the middle with a fingernail file or a small flat-tip screwdriver. Do not pry on the edge of the housing around the lens. 2.
Main Menu Table of Contents Storing Your Car If you need to park your car for an extended period (more than one month), there are several things you should do to prepare it for storage. Proper preparation helps prevent deterioration and makes it easier to get your car back on the road. If possible, store your car indoors. Block the rear wheels. If the car is to be stored for a longer period, it should be supported on jackstands so the tires are off the ground.
Main Menu Appearance Care Regular cleaning and polishing of your Honda helps to keep it ‘‘new’’ looking. This section gives you hints on how to clean your car and preserve its appearance: the paint, brightwork, wheels and interior. Also included are several things you can do to help prevent corrosion. Exterior Care.................................. 206 Roof Antenna ............................. 206 Rear Wheel Skirt ....................... 206 Washing ...................................... 207 Waxing .....
Main Menu Table of Contents Exterior Care Roof Antenna Rear Wheel Skirt Before using an automatic car wash, remove the radio antenna so it does not get damaged. Remove the antenna by unscrewing it. When you reinstall the antenna, tighten it securely. If an automatic car wash has tire cleaning brushes, remove the skirts covering the rear wheels so they will not be damaged. See page 216 for how to remove and install the skirts.
Main Menu Table of Contents Exterior Care Although almost all exterior panels on your Honda are made of hardened aluminum, they may dent more easily than steel under some conditions. Exercise care when leaning on or over any part of the body. Washing Frequent washing helps preserve your car’s beauty. Dirt and grit can scratch the paint, while tree sap and bird droppings can permanently ruin the finish. Wash your car in a shady area, not in direct sunlight.
Main Menu Table of Contents Exterior Care Waxing Always wash and dry the whole car before waxing it. You should wax your car, including the metal trim, whenever water sits on the surface in large patches. It should form into beads or droplets after waxing. You should use a quality liquid or paste wax. Apply it according to the instructions on the container. In general, there are two types of products: Waxes − A wax coats the finish and protects it from damage by exposure to sunlight, air pollution, etc.
Main Menu Table of Contents Interior Care Carpeting Vacuum the carpeting frequently to remove dirt. Ground-in dirt will make the carpet wear out faster. Periodically shampoo the carpet to keep it looking new. Use one of the foam-type carpet cleaners on the market. Follow the instructions that come with the cleaner, applying it with a sponge or soft brush. Keep the carpeting as dry as possible by not adding water to the foam. Fabric Vacuum dirt and dust out of the material frequently.
Main Menu Table of Contents Interior Care, Corrosion Protection Windows Clean the windows, inside and out, with a commercially-available glass cleaner. You can also use a mixture of one part white vinegar to ten parts water. This will remove the haze that builds up on the inside of the windows. Use a soft cloth or paper towels to clean all glass and clear plastic surfaces. The rear window def ogger wires are bonded to the inside of the glass.
Main Menu Table of Contents Corrosion Protection, Body Repairs Inspect and clean out the drain holes in the bottom of the doors and body. Check the floor coverings for dampness. Carpeting and floor mats may remain damp for a long time, especially in winter. This dampness can eventually cause the floor panels to corrode. Use a high-pressure spray to clean the underside of your car. This is especially important in areas that use road salt in winter.
Main Menu 212
Main Menu Taking Care of the Unexpected This section covers the morecommon problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your car towed. Compact Spare Tire....................... 214 Changing a Flat Tire ..................... 215 If Your Engine Won’t Start ...
Main Menu Table of Contents Compact Spare Tire Your car has a compact spare tire that takes up less space. Use this spare tire as a temporary replacement only. Get your regular tire repaired or replaced and put it back on your car as soon as you can. Check the inflation pressure of the compact spare tire every time you check the other tires.
Main Menu Table of Contents Changing a Flat Tire If you have a flat tire while driving, stop in a safe place to change it. Stopping in traffic or on the shoulder of a busy road is dangerous. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes. The car can easily roll off the jack, seriously injuring anyone underneath. Follow the directions for changing a tire exactly, and never get under the car when it is supported only by the jack. 1.
Main Menu Table of Contents Changing a Flat Tire REAR WHEEL SKIRT CENTER CAP STUD FASTENER 1. Rear tire only: Use the end of the extension or a flat-tipped screwdriver to loosen the two stud fasteners holding the rear wheel skirt. 216 Taking Care of the Unexpected 2. Pull the rear wheel skirt downward. Do not catch your clothes or hands on the hooks on the rear fender when you replace the wheel. 3. Remove the center cap from the wheel with the end of the extension or a flat-tipped screwdriver. 4.
Main Menu Table of Contents Changing a Flat Tire JACKING POINT 5. Locate the jacking point nearest the tire you need to change. It is pointed to by an arrow molded into the underside of the body. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. WHEEL WRENCH EXTENSION 6.
Main Menu Table of Contents Changing a Flat Tire 8. Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully, it may be hot from driving. 218 Taking Care of the Unexpected 9. Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel wrench until the wheel is firmly against the hub. Do not try to tighten them fully. 10.
Main Menu Table of Contents Changing a Flat Tire TAB SLOT 11.Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility. Tighten the wheel nuts to: 80 lbf·ft (108 N·m , 11 kgf·m) Do not catch your clothes or hands on the hooks on the rear fender when you replace the wheel. 12.To install the rear wheel skirt, place the skirt against the body.
Main Menu Table of Contents Changing a Flat Tire WING BOLT SPACER CONE 17.Store the jack and tool kit back in the spare tire well. Loose items can fly around the interior in a crash and could seriously injure the occupants. Store the wheel, jack, and tools securely before driving. 14.Remove the center cap. Place the flat tire face down in the spare tire well. 18.Store the wheel cover or center cap in the spare tire well. Make sure it does not get scratched or damaged. 15.
Main Menu Table of Contents If Your Engine Won’t Start Diagnosing why your engine won’t start falls into two areas, depending on what you hear when you turn the key to START (III): You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly. You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.
Main Menu Table of Contents If Your Engine Won’t Start, Jump Starting The Starter Operates Normally In this case, the starter motor’s speed sounds normal, or even faster than normal, when you turn the ignition switch to START (III), but the engine does not run. Are you using the proper starting procedure? Refer to Starting the Engine on page 133 . Do you have fuel? Turn the ignition switch to ON (II) for a minute and watch the fuel gauge.
Main Menu Table of Contents Jump Starting BOOSTER BATTERY 3. Connect one jumper cable to the positive (+) terminal on your Honda’s battery. Connect the other end to the positive (+) terminal on the booster battery. 4. Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine. 5.
Main Menu Table of Contents If Your Engine Overheats Keep the ends of the jumper cables away from each other and any metal on the car until all are disconnected. Otherwise, you may cause an electrical short. The pointer of your car’s temperature gauge should stay in the midrange under most conditions. It may go higher if you are driving up a long steep hill on a very hot day. If it climbs to the red mark, you should determine the reason.
Main Menu Table of Contents If Your Engine Overheats 4. If the temperature gauge stays at the red mark, turn off the engine. 5. Wait until you see no more signs of steam or spray, then open the hood. 6. Look for any obvious coolant leaks, such as a split radiator hose. Everything is still extremely hot, so use caution. If you find a leak, it must be repaired before you continue driving (see Emergency Towing on page 237 ). 7.
Main Menu Table of Contents Low Oil Pressure Indicator LOW OIL PRESSURE INDICATOR Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the car stopped. 1. Safely pull off the road and shut off the engine. Turn on the hazard warning indicators. This indicator should light when the ignition switch is ON (II), and go out after the engine starts. It should never come on when the engine is running.
Main Menu Table of Contents Charging System Indicator CHARGING SYSTEM INDICATOR Immediately turn off all electrical accessories: A/C, rear defogger, etc. Try not to use other electricallyoperated controls such as the radio. Keep the engine running and take extra care not to stall it. Starting the engine will discharge the battery rapidly. By eliminating as much of the electrical load as possible, you can drive several miles (kilometers) before the battery is too discharged to keep the engine running.
Main Menu Table of Contents Malfunction Indicator Lamp MALFUNCTION INDICATOR LAMP This indicator comes on for a few seconds when you turn the ignition switch ON (II). If it comes on at any other time, it indicates one of the engine’s emissions control systems may have a problem. Even though you may feel no difference in your car’s performance, it can reduce your fuel economy and cause your car to put out excessive emissions. Continued operation may cause serious damage.
Main Menu Table of Contents Malfunction Indicator Lamp Readiness Codes Your car has certain ‘‘readiness codes’’ that are part of the on-board diagnostics for the emissions systems. In some states, part of the emissions testing is to make sure these codes are set. If they are not set, the test cannot be completed. If your car’s battery has been disconnected or gone dead, these codes are erased. It takes several days of driving under various conditions to set the codes again.
Main Menu Table of Contents Brake System Indicator BRAKE SYSTEM INDICATOR* * U.S. indicator shown The Brake System Indicator is a reminder to check the parking brake. It comes on and stays lit if you do not fully release the parking brake. 230 Taking Care of the Unexpected If it comes on at any other time, it indicates a problem with the car’s brake system. In most cases, the problem is a low fluid level in the brake fluid reservoir. Press lightly on the brake pedal to see if it feels normal.
Main Menu Table of Contents Fuses All the electrical circuits in your car have fuses to protect them from a short circuit or overload. These fuses are located in two fuse boxes. INTERIOR The interior fuse is underneath the dashboard on the driver’s side. Remove the storage pocket by swinging the lid down, pushing up, and pulling it straight out of its hinges. TAB UNDER-HOOD The under-hood fuse box is located in the engine compartment. To open it, push the tab as shown.
Main Menu Table of Contents Fuses Checking and Replacing Fuses If something electrical in your car stops working, the first thing you should check for is a blown fuse. Determine from the chart on pages 234 and 235 , or the diagram on the fuse box lid, which fuse or fuses control that component. Check those fuses first, but check all the fuses before deciding that a blown fuse is not the cause. Replace any blown fuses and check the component’s operation. 1. Turn the ignition switch to LOCK (0).
Main Menu Table of Contents Fuses BLOWN 5. Look for a burned wire inside the fuse. If it is burned, replace it with one of the spare fuses of the same rating or lower. If you cannot drive the car without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio).
Main Menu Table of Contents Fuses INTERIOR FUSE BOX No. Amps. No. Amps. 1 2 3 4 5 6 7 8 9 10 234 Taking Care of the Unexpected 10 A 15 A 20 A 7.5 A 7.5 A 7.5 A 15 A 20 A 7.5 A 20 A Circuits Protected SRS Fuel Pump, SRS Front Wiper FI-ECU Turn Light Meter IG Coil Power Window, Passenger Starter Signal Power Window, Driver 11 12 13 14 15 16 7.5 A 10 A 17 18 19 20 21 22 23 24 25 26 27 7.5 A 7.5 A 7.5 A 10 A 10 A 20 A 7.5 A 7.5 A − 20 A 10 A 7.5 A − 10 A 7.
Main Menu Table of Contents Fuses UNDER-HOOD FUSE BOX No. Amps. 1 2 3 4 5 6 7 8 9 10 50 A 80 A 30 A 10 A 15 A 10 A 15 A 15 A − 15 A Circuits Protected IG1 Main Battery ABS Motor Hazard IMA Horn Stop Fuel Pump Left Headlight Not used Right Headlight No. Amps. 11 12 13 14 15 16 17 18 19 20 30 A 40 A 30 A 20 A 40 A 30 A 40 A 7.
Main Menu Table of Contents If Your Car Gets Stuck If your car gets stuck in sand, mud, or snow, call a towing service to pull it out (see page 237 ). For very short distances, such as freeing the car, you can use the detachable towing hook that mounts on the anchor in the front bumper. To use the towing hook: 1. Remove the cover from the bumper. 236 Taking Care of the Unexpected 2. Remove the towing hook and wheel wrench from the tool box. 3.
Main Menu Table of Contents Emergency Towing If your car needs to be towed, call a professional towing service or, if you belong to one, an organization that provides roadside assistance. Never tow your car behind another vehicle with just a rope or chain. It is very dangerous. on the ends. These hooks go around parts of the frame or suspension and the cables lift that end of the car off the ground. Your car’s suspension and body can be seriously damaged. This method of towing is unacceptable.
Main Menu Table of Contents Emergency Towing If you decide to tow your car with all four wheels on the ground, make sure you use a properly-designed and attached tow bar. Prepare the car for towing as described above, and leave the ignition switch in Accessory (I) so the steering wheel does not lock. Make sure the radio and any items plugged into the accessory power socket are turned off so they do not run down the battery. The steering system can be damaged if the steering wheel is locked.
Main Menu Technical Information The diagrams in this section give you the dimensions and capacities of your Honda, and the locations of the identification numbers. It also includes information you should know about your vehicle’s tires and emissions control systems. Identification Numbers ................. 240 Specifications ................................. 242 DOT Tire Quality Grading (U.S. Vehicles) ....................... 244 Uniform Tire Quality Grading ...................................
Main Menu Table of Contents Identification Numbers Your car has several identifying numbers located in various places. VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is the 17-digit number your Honda dealer uses to register your car for warranty purposes. It is also necessary for licensing and insuring your car. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver’s side.
Main Menu Table of Contents Identification Numbers The Engine Number is stamped into the engine block. TRANSMISSION NUMBER AUTOMATIC TRANSMISSION NUMBER ENGINE NUMBER The Transmission Number is on a label on top of the transmission.
Table of Contents Main Menu Specifications Dimensions Length Width Height Wheelbase Track 155.0 in (3,938 mm) 66.7 in (1,695 mm) 53.3 in (1,355 mm) 94.5 in (2,400 mm) 56.5 in (1,435 mm) 52.2 in (1,325 mm) Front Rear Weights Gross vehicle weight rating Engine Type Bore x Stroke Displacement Compression ratio M/T CVT Spark plugs*1 See the certification label attached to the driver’s doorjamb. Water cooled 4-stroke SOHC VTEC in line 3-cylinder gasoline engine 2.8 x 3.21 in (72 x 81.5 mm) 60.
Main Menu Table of Contents Specifications Air Conditioning Refrigerant type Charge quantity Lubricant type HFC-134a (R-134a) 17.6−19.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) The tires on your car meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between the tread shoulder and the maximum section width.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) Temperature − A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Main Menu Table of Contents Oxygenated Fuels Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help reduce emissions. If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement. Before using an oxygenated fuel, try to confirm the fuel’s contents.
Main Menu Table of Contents Driving in Foreign Countries If you are planning to take your Honda outside the U.S. or Canada, contact the tourist bureaus in the areas you will be traveling in to find out about the availability of unleaded gasoline with the proper octane rating. If unleaded gasoline is not available, be aware that using leaded gasoline in your Honda will affect performance and fuel mileage, and damage its emissions controls. It will no longer comply with U.S.
Main Menu Table of Contents Emissions Controls The burning of gasoline in your car’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx) and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
Main Menu Table of Contents Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include three systems: PGM-FI, Ignition Timing Control and Three Way Catalytic Converter. These three systems work together to control the engine’s combustion and minimize the amount of HC, CO, and NOx that comes out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
Main Menu Table of Contents Three Way Catalytic Converter The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent. The three way catalytic converter must operate at a high temperature for the chemical reactions to take place.
Main Menu Table of Contents State Emissions Testing Testing of Readiness Codes If you take your vehicle for a state emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
Main Menu Table of Contents State Emissions Testing Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (A/T) or 5th (M/T). When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
Main Menu Warranty and Customer Relations Customer Relations Information ................................. 254 Warranty Coverages ..................... 255 Reporting Safety Defects (U.S. Vehicles) ........................... 256 Authorized Manuals ......................
Main Menu Table of Contents Customer Relations Information Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s management. The Service Manager or General Manager can help. Almost all problems are solved in this way.
Main Menu Table of Contents Warranty Coverages U.S. Owners Your new Honda is covered by these warranties: New Car Limited Warranty − covers your new vehicle, except for the battery, emissions control systems and accessories, against defects in materials and workmanship. Emissions Control Systems Defects Warranty and Emissions Performance Warranty − these two Seat Belt Limited Warranty − a seat belt that fails to function properly is covered for the useful life of the vehicle.
Main Menu Table of Contents Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc.
Main Menu Table of Contents Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) The following publications covering the operation and servicing of your vehicle can be obtained from Helm Incorporated, either by filling out the attached form or, for credit card holders, calling the toll-free phone number on the form. For manuals prior to the year shown below, contact Helm Incorporated, P.O. Box 07280, Detroit, Michigan 48207, or call 1-800-782-4356.
Main Menu Table of Contents Authorized Manuals NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention the shipment should be sent. For purchases outside U.S.A. please write to the address shown below for a quotation. S H I P T O Customer Name Attention Street Address − No P.O.
Main Menu Index A Accessories and Modifications .... 126 Accessories................................. 126 Additional Safety Precaution.... 127 Modifications ............................. 127 ACCESSORY (Ignition Key Position) ........................................ 70 Accessory Power Socket ................ 81 Additives, Engine Oil..................... 166 Airbag (SRS) ................................ 9, 47 Air Conditioning System ................. 90 Maintenance ............................... 188 Usage..
Main Menu Index CD Player........................................ 108 Certification Label ......................... 240 Chains ............................................. 195 Charge/Assist Gauge ..................... 57 Changing Oil How to ......................................... 167 When to....................................... 156 Changing a Flat Tire ..................... 215 Changing Engine Coolant ............. 171 Charging System Indicator............. 56 Checklist, Before Driving .............
Main Menu Index Charging System Indicator ...... 227 Checking the Fuses................... 232 Low Oil Pressure Indicator ...... 226 Malfunction Indicator Lamp .... 228 Overheated Engine ................... 224 Emergency Brake ............................ 79 Emergency Flashers ....................... 65 Emergency Towing ....................... 237 Emissions Controls........................ 248 Engine Belts............................................. 189 Coolant Temperature Gauge .....
Main Menu Index Gauges Engine Coolant Temperature ............................ 58 Fuel ................................................ 58 Speedometer ................................ 50 Tachometer .................................. 58 Gearshift Lever Positions Automatic Transmission (CVT) ...................................... 138 5-speed Manual Transmission.......................... 134 Glass Cleaning ............................... 210 Glove Box .........................................
Main Menu Index Load Limit ...................................... 129 LOCK (Ignition Key Position) ....... 69 Locks Fuel Fill Door ............................. 119 Hatch ............................................. 71 Low Coolant Level ......................... 123 Low Fuel Indicator .......................... 58 Lower Gear, Downshifting to a.... 137 Lubricant Specifications Chart .... 243 Luggage .......................................... 128 M Maintenance ...................................
Main Menu Index R Radiator Overheating .................... 225 Radio/Cassette Sound System....... 98 Rear Lights, Bulb Replacement ... 201 Rear View Mirror ............................. 79 Rear Window Defogger .................. 65 Rear Window Washer ..................... 65 Rear Window Wiper ........................ 65 Reclining the Seat Backs ................ 76 Replacement Information Air Cleaner Element .................. 181 Engine Coolant........................... 171 Engine Oil and Filter ........
Main Menu Index Steam Coming from Engine ......... 224 Steering Wheel Anti-theft Column Lock .............. 69 Stereo Sound System ...................... 98 Storing Your Car ............................ 204 Supplemental Restraint System................................... 9, 36 Servicing ....................................... 39 SRS Indicator.......................... 34, 46 System Components.................... 36 Synthetic Oil ................................... 166 T Tachometer ........................
Main Menu Index VIN .................................................. 240 Vinyl Cleaning ................................ 209 Viscosity, Oil................................... 166 W WARNING, Explanation of .............. ii Warning Labels, Location of .......... 41 Warranty Coverages* ................... 255 Washer, Windshield Operation ...................................... 64 Washing .......................................... 207 Waxing and Polishing ...................
Main Menu Service Information Summary Gasoline: Unleaded gasoline, pump octane number of 87 or higher. Fuel Tank Capacity: 10.6 US gal (40 , 8.8 Imp gal) Recommended Engine Oil: API Service SJ ‘‘Energy Conserving’’ oil, SAE 0W-20 viscosity (see page 167 ). Oil change capacity (including filter): 2.6 US qt (2.5 , 2.2 Imp qt) Automatic Transmission Fluid: Use Honda ATF-Z1 (Automatic Transmission Fluid) only. Capacity: 5.8 US qt (5.5 , 4.