2006 Insight Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com. Contents Owner's Identification Form Introduction ......................................................................................................................................... i A Few Words About Safety.................................................................................
Main Menu Owner’s Identification This owner’s manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. OWNER ADDRESS STREET CITY STATE/PROVINCE ZIP CODE/ POSTAL CODE This owner’s manual covers all models of the Insight. You may find descriptions of equipment and features that are not on your particular model. V. I. N. DELIVERY DATE (Date sold to original retail purchaser) DEALER NAME DEALER NO.
Main Menu Introduction Congratulations! Your selection of a 2006 Honda Insight was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new Honda is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your vehicle so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
Main Menu A Few Words About Safety Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of course, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle.
Main Menu Your Vehicle at a Glance POWER WINDOW SWITCHES (P. 67) INSTRUMENT PANEL INDICATORS (P. 43) GAUGES (P. 48) HEATING/COOLING CONTROLS (P. 74, 78) PASSENGER’S FRONT AIRBAG (P. 21) AUDIO SYSTEM (P. 80) DIGITAL CLOCK (P. 91) FCD SELECT BUTTON (P. 51) DOOR LOCK (P. 62) DRIVER’S FRONT AIRBAG (P. 21) ACCESSORY POWER SOCKET (P. 71) FUEL FILL DOOR RELEASE (P. 95) HOOD RELEASE HANDLE (P. 96) * U.S. model 4 AUTOMATIC TRANSMISSION (CVT)* (P. 113) MANUAL TRANSMISSION (P.
Main Menu Your Vehicle at a Glance MIRROR CONTROLS (P. 68) Your Vehicle at a Glance WINDSHIELD WIPERS/WASHERS (P. 55) ECON BUTTON (P. 75) HAZARD WARNING BUTTON (P. 57) POWER WINDOW SWITCHES (P. 67) HEADLIGHTS/TURN SIGNALS (P. 56) AUDIO SYSTEM (P. 80) HORN (P. 54) DRIVE MODE BUTTONS (CVT)* (P. 115) REAR WINDOW DEFOGGER (P. 58) * U.S.
Main Menu 6
Main Menu Driver and Passenger Safety Important Safety Precautions .......... 8 Your Vehicle’s Safety Features........ 9 Seat Belts ...................................... 10 Airbags .......................................... 11 Protecting Adults and Teens.......... 12 1. Close and Lock the Doors ...... 12 2. Adjust the Seats ....................... 12 3. Adjust the Seat-Backs ............. 13 4. Fasten and Position the Seat Belts .............................. 14 5. Maintain a Proper Sitting Position .....
Main Menu Table of Contents Important Safety Precautions You’ll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them.
Main Menu Table of Contents Your Vehicle’s Safety Features (1) (3) (9) (6) (7) (2) (5) (8) (2) (1) Safety Cage (2) Crush Zones (3) Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Seat Belt Tensioners (8) Airbags (9) Door Locks Some features do not require any action on your part.
Main Menu Table of Contents Your Vehicle’s Safety Features Seat Belts Your vehicle is equipped with seat belts in both seating positions. Your seat belt system also includes an indicator on the instrument panel to remind you and your passenger to fasten your seat belts. Why Wear Seat Belts Seat belts have proven to be the single most effective safety device for adults and larger children.
Main Menu Table of Contents Your Vehicle’s Safety Features Airbags The most important things you need to know about your airbags are: Front airbags offer no protection in side impacts, rear impacts, rollovers, or minor collisions. Airbags can pose serious hazards.
Main Menu Table of Contents Protecting Adults and Teens Introduction The following pages provide instructions on how to properly protect the driver, an adult passenger or teenage child large enough and mature enough to drive or ride in your vehicle. See pages 25 − 37 for important guidelines on how to properly protect a small or larger child. 1.Close and Lock the Doors After everyone has entered the vehicle, be sure the doors are closed and locked.
Main Menu Table of Contents Protecting Adults and Teens If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help. Once your seat is adjusted correctly, rock it back and forth to make sure the seat is locked in position. See page 66 for how to adjust the seats. 3.Adjust the Seat-Backs Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.
Main Menu Table of Contents Protecting Adults and Teens Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury. 4.
Main Menu Table of Contents Protecting Adults and Teens Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. This could cause very serious injuries in a crash. Improperly positioning the seat belts can cause serious injury or death in a crash. If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt.
Main Menu Table of Contents Protecting Adults and Teens In addition, an occupant who is out of position can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag. Advice for Pregnant Women When driving, remember to sit upright and adjust the seat as far back as possible while allowing full control of the vehicle. When riding as a passenger, adjust the seat as far back as possible.
Main Menu Table of Contents Protecting Adults and Teens Additional Safety Precautions Two people should never use the same seat belt. If they do, they Do not put any accessories on seat belts. Devices intended to improve occupant comfort or reposition the shoulder part of a seat belt can reduce the protective capability of the belt and increase the chance of serious injury in a crash.
Main Menu Table of Contents Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in both seating positions. These belts are equipped with automatic seat belt tensioners. The seat belt system includes an indicator on the instrument panel and a beeper to remind you to fasten your seat belt. If you turn the ignition switch to the ON (II) position before fastening your seat belt, the beeper will sound, and the indicator will flash.
Main Menu Table of Contents Additional Information About Your Seat Belts Automatic Seat Belt Tensioners Seat Belt Maintenance For safety, you should check the condition of your seat belts regularly. However, the tensioners can be activated during a collision in which the front airbags do not deploy. In this case, the airbags would not be needed, but the additional restraint could be helpful. Pull each belt out fully and look for frays, cuts, burns, and wear.
Main Menu Table of Contents Additional Information About Your Seat Belts The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced. For information on how to clean your seat belts, see page 151 . Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
Main Menu Table of Contents Additional Information About Your Airbags Airbag System Components Your airbag system includes: How Your Front Airbags Work Driver and Passenger Safety Two SRS (Supplemental Restraint System) front airbags. The driver’s airbag is stored in the center of the steering wheel; the passenger’s airbag is stored in the dashboard. Both are marked ‘‘SRS AIRBAG.
Main Menu Table of Contents Additional Information About Your Airbags During a frontal crash, your seat belt restrains your lower body and torso, and the airbag helps protect your head and chest. After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.
Main Menu Table of Contents Additional Information About Your Airbags When you turn the ignition switch to the ON (II) position, this indicator comes on briefly then goes off. This tells you the system is working properly. If the indicator comes on at any other time, or does not come on at all, you should have the system checked by your dealer. For example: If the SRS indicator does not come on after you turn the ignition switch to the ON (II) position. If the indicator stays on after the engine starts.
Main Menu Table of Contents Additional Information About Your Airbags Additional Safety Precautions Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection. Do not tamper with airbag components or wiring for any reason. Tampering could cause the airbags to deploy, possibly causing very serious injury.
Main Menu Table of Contents Protecting Children − General Guidelines If you ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children and larger children. All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained.
Main Menu Table of Contents Protecting Children − General Guidelines Your Vehicle is Not Recommended for Child Passengers The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. The Passenger’s Front Airbag Poses Serious Risks Front airbags have been designed to help protect adults in a moderate to severe frontal collision.
Main Menu Table of Contents Protecting Children − General Guidelines U.S. Models Sun Visor Dashboard Driver and Passenger Safety To remind you of the passenger’s airbag hazards, your vehicle has warning labels on the dashboard (U.S. models) and on the driver’s and passenger’s visors. Please read and follow the instructions on these labels.
Main Menu Table of Contents Protecting Children − General Guidelines Additional Safety Precautions Never hold a small child on your lap. If you are not wearing a seat belt in crash, you could be thrown forward and crush the child against the dashboard. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed. Never put a seat belt over yourself and a child. During a crash, the belt could press deep into the child and cause serious or fatal injuries.
Main Menu Table of Contents Protecting Small Children We also recommend that a small child use the child seat as long as possible, until the child reaches the weight or height limit for the seat. If you decide to transport a small child in this vehicle, be sure to move the passenger seat as far to the rear as possible, and follow the instructions and guidelines in the following pages.
Main Menu Table of Contents Selecting a Child Seat, Installing a Child Seat Selecting a Child Seat To provide proper protection, a child seat should meet three requirements: Installing a Child Seat After selecting a proper child seat, there are three main steps in installing a child seat: 1. The child seat should meet U.S. or Canadian Motor Vehicle Safety Standard 213. Look for FMVSS 1. Properly secure the child seat to the vehicle.
Main Menu Table of Contents Installing a Child Seat 1. Move the vehicle seat to the rearmost position. Moving the seat as far back as possible reduces the chance of a child being injured or killed if the passenger’s airbag inflates. 2. With the child seat in position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle. 4. After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out.
Main Menu Table of Contents Installing a Child Seat To deactivate the locking mechanism and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract. 5. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
Main Menu Table of Contents Installing a Child Seat Installing a Child Seat with a Tether Driver and Passenger Safety ANCHOR ANCHORAGE POINT A child seat with a tether can be installed in the passenger’s seat, using the anchorage point shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. TETHER STRAP HOOK 1.
Main Menu Table of Contents Protecting Larger Children When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear a lap/shoulder belt. Since this vehicle does not have a back seat, we recommend that you do not carry a larger child, age 12 or under, as a passenger.
Main Menu Table of Contents Protecting Larger Children 3. Does the shoulder belt cross between the child’s neck and arm? Using a Booster Seat 5. Will the child be able to stay seated like this for the whole trip? If a child who uses a booster seat rides in this vehicle, move the vehicle seat as far to the rear as possible, and be sure the child is wearing the seat belt properly.
Main Menu Table of Contents Protecting Larger Children When Can a Larger Child Ride in This Vehicle As noted earlier, the National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under ride properly restrained in a back seat. Physical Size Physically, a child must be large enough for the lap/shoulder belt to properly fit (see page 34 ).
Main Menu Table of Contents Protecting Larger Children Additional Safety Precautions Do not let a child wear a seat belt across the neck. This could result in Driver and Passenger Safety serious neck injuries during a crash. Do not let a child put the shoulder part of a seat belt behind the back or under the arm. This could cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.
Main Menu Table of Contents Carbon Monoxide Hazard Your vehicle’s exhaust contains carbon monoxide gas. You should have no problem with carbon monoxide entering the vehicle in normal driving if you maintain your vehicle properly. Have the exhaust system inspected for leaks whenever: The vehicle is raised for an oil change. You notice a change in the sound of the exhaust. The vehicle was in an accident that may have damaged the underside. 38 Carbon monoxide gas is toxic.
Main Menu Table of Contents Safety Labels SUN VISOR U.S. models Canadian models Driver and Passenger Safety These labels are in the locations shown. They warn you of potential hazards that could cause serious injury. Read these labels carefully. If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement. DASHBOARD U.S.
Main Menu 40
Main Menu Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Immobilizer System......................... 60 Ignition Switch ................................. 61 Door Locks ....................................... 62 Hatch ................................................. 63 Remote Transmitter ........................ 64 Seats ........................................
Main Menu Table of Contents Control Locations FCD SELECT BUTTON (P. 51) POWER WINDOW SWITCHES (P. 67) HEATING/COOLING CONTROLS (P. 74, 78) AUDIO SYSTEM (P. 80) CLOCK (P. 91) DOOR LOCK (P. 62) FUEL FILL DOOR RELEASE (P. 95) HOOD RELEASE HANDLE (P. 96) * U.S. model 42 DRIVE MODE BUTTONS (CVT)* (P.
Main Menu Table of Contents Instrument Panel Manual Transmission shown SEAT BELT REMINDER INDICATOR (P. 44) ELECTRIC POWER STEERING INDICATOR (P. 46) TURN SIGNAL AND HAZARD WARNING INDICATORS (P. 45) HIGH BEAM INDICATOR (P. 46) PARKING BRAKE AND BRAKE SYSTEM INDICATOR*1 (P. 45) DOOR AND HATCH OPEN INDICATOR (P. 46) LOW OIL PRESSURE INDICATOR (P. 44, 179) MALFUNCTION INDICATOR LAMP (P. 180) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR (P. 45) AUTO IDLE STOP INDICATOR (P.
Main Menu Table of Contents Instrument Panel Indicators The instrument panel has many indicators to give you important information about your vehicle. Seat Belt Reminder Indicator This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passenger to fasten your seat belts. A beeper also sounds if you have not fastened your seat belt.
Main Menu Table of Contents Instrument Panel Indicators U.S. Canada Malfunction Indicator Lamp See page 180 . 1. It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. Driving with the parking brake not fully released can damage the brakes and tires. 2. If it remains lit after you fully release the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system.
Main Menu Table of Contents Instrument Panel Indicators High Beam Indicator This indicator comes on with the high beam headlights. For more information, see page 56 . On Canadian models, this indicator comes on with reduced brightness when the daytime running lights (DRL) are on (see page 56 ). ‘‘Daytime Running Lights’’ Indicator Canadian models only This indicator comes on when you turn the ignition switch to the ON (II) position with the headlight switch off and the parking brake set.
Main Menu Table of Contents Instrument Panel Indicators Maintenance Required Indicator This indicator reminds you that it is time to take your vehicle in for scheduled maintenance. Refer to the maintenance schedule for normal and severe driving conditions on pages 129 and 130 . When the distance driven since the last scheduled maintenance reaches 6,000 miles (9,600 km), the indicator starts blinking. If you exceed 7,500 miles (12,000 km), the indicator stays on.
Main Menu Table of Contents Gauges Manual Transmission shown IMA CHARGE/ASSIST GAUGE TACHOMETER AUTO IDLE STOP INDICATOR FUEL MILEAGE DISPLAY TEMPERATURE GAUGE SPEEDOMETER BATTERY LEVEL GAUGE CURRENT FUEL MILEAGE DISPLAY FUEL GAUGE TRIP BUTTON TRIP METER/ODOMETER DISPLAY CHANGE BUTTON 48
Main Menu Table of Contents Gauges Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount. Odometer The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S. federal law and Canadian provincial regulations to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated.
Main Menu Table of Contents Gauges Current Fuel Mileage CURRENT FUEL MILEAGE This display shows the current, or instantaneous fuel mileage you are getting. (U.S.: miles per hour and mpg, Canada: kilometer per hour and l/100 km) You can turn off this display at any time. See page 52 . Trip Meters The trip meters show the number of miles or kilometers driven since you last reset them. There are two trip meters: Trip A and Trip B.
Main Menu Table of Contents Gauges Lifetime Fuel Mileage SEGMENT DISPLAY INDICATOR LIFETIME FUEL MILEAGE FUEL CONSUMPTION DISPLAY (FCD) SELECT BUTTON To reset the display, press and hold the FCD Select button until the display resets to zero and dashes. The system then begins displaying the distance and average fuel mileage from that point. The display is updated once per minute. When the odometer is displayed, the Fuel Mileage display shows the lifetime fuel mileage.
Main Menu Table of Contents Gauges To reset this display, turn the ignition switch to the ON (II) position, the transmission is in neutral or Park (CVT), and the parking brake is set. Use the Trip button to display the odometer. Then press and hold the Trip button until the Lifetime Fuel Mileage Display begins to blink (approximately five seconds). Release the Trip button, then press it again while the display is blinking and hold it until the display clears to dashes.
Main Menu Table of Contents Gauges IMA CHARGE/ ASSIST GAUGE BATTERY LEVEL GAUGE Battery Level Gauge This gauge shows you the state of charge of the battery for the Integrated Motor Assist (IMA). This battery is recharged by the IMA motor, and discharged by the IMA when it is assisting the engine with powering the vehicle. BATTERY LEVEL GAUGE Charge/Assist Gauge This gauge shows the status of the Integrated Motor Assist (IMA).
Main Menu Table of Contents Controls Near the Steering Wheel POWER WINDOW SWITCHES (P. 67) MIRROR CONTROLS (P. 68) WINDSHIELD WIPERS/WASHERS (P. 55) HAZARD WARNING BUTTON (P. 57) ECON BUTTON (P. 75) AUDIO SYSTEM (P. 80) HEADLIGHTS/TURN SIGNALS (P. 56) HORN* DRIVE MODE BUTTONS (CVT model only) (P. 115) * : To use the horn, press the pad around the ‘‘H’’ logo. 54 REAR WINDOW DEFOGGER (P.
Main Menu Table of Contents Windshield Wipers and Washers Push the right lever up or down to select a position. Rear Window Wiper and Washer MIST − The wipers run at high speed until you release the lever. INT − The wipers operate every few seconds. In low speed and high speed, the wipers run continuously. 1. MIST 2. OFF 3. INT − Intermittent 4. LO − Low speed 5. HI − High speed 6. Windshield washers LO − The wipers run at low speed. HI − The wipers run at high speed.
Main Menu Table of Contents Turn Signal and Headlights Turn Signal − Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn. 1. Turn Signal 2. OFF 3. Parking and interior lights 4. Headlights on 5. High Beams 6.
Main Menu Table of Contents Instrument Panel Brightness, Hazard Warning Button Instrument Panel Brightness + BUTTON The buttons in the lower left corner of the instrument panel adjust the brightness of the display in six steps. Push the + or − button five times to see the full range. Hazard Warning Button With the headlight switch on, you can switch the display to full daytime brightness by pushing and holding the + button. Push the − button to return the display to the original brightness.
Main Menu Table of Contents Rear Window Defogger Automatic Operation The rear window defogger turns on automatically when you turn the ignition switch to the ON (II) position if the outside temperature is below 32°F (0°C), and the engine is at ambient temperature. The indicator in the button does not light. It will also turn off automatically after 25 minutes. Manual Operation The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off.
Main Menu Table of Contents Keys and Locks KEY NUMBER TAG MASTER KEYS (BLACK) VALET KEY (GREY) The valet key works only in the ignition and the door locks. You can keep the glove box and the hatch locked when you leave your vehicle and the valet key at a parking facility. The master key fits all the locks on your vehicle. Keep the keys away from liquids. If they get wet, dry them immediately with a soft cloth. The keys do not contain batteries. Do not try to take them apart.
Main Menu Table of Contents Immobilizer System The immobilizer system protects your vehicle from theft. If an improperly-coded key (or other device) is used, the engine’s fuel system is disabled. The system may not recognize your key’s coding if another immobilizer key or other metal object (i.e. key fob) is near the ignition switch when you insert the key. When you turn the ignition switch to the ON (II) position, the immobilizer system indicator should come on for a few seconds, then go off.
Main Menu Table of Contents Ignition Switch If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key. The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III). LOCK (0) − You can insert or remove the key only in this position. To turn the key to the LOCK (0) position, push it in slightly.
Main Menu Table of Contents Door Locks Power Door Locks Door Locks LOCK TAB Unlock Lock MASTER DOOR LOCK SWITCH The master door lock switch allows control of both door and hatch locks from the driver’s door. Push the switch down to lock both doors and the hatch, and up to unlock the driver’s door. 62 Each door has a lock tab next to the inside door handle. Push the tab in to lock the door, and pull it out to unlock.
Main Menu Table of Contents Hatch Keep the hatch closed at all times while driving to avoid damaging it and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard on page 38 . Hatch MASTER KEY UNLOCK POSITION Use the master key to lock and unlock the hatch. The valet key does not work in this lock. To lock the hatch, turn the key counterclockwise. To unlock the hatch, turn it clockwise.
Main Menu Table of Contents Remote Transmitter LED LOCK BUTTON UNLOCK BUTTON PANIC BUTTON LOCK − Press this button once to lock both doors and the rear hatch. Some exterior lights will flash. When you push LOCK twice within 5 seconds, you will hear a horn to verify that the doors and the rear hatch are locked. You cannot lock them if either door is not fully closed or the key is in the ignition switch. 64 UNLOCK − Press this button once to unlock the driver’s door.
Main Menu Table of Contents Remote Transmitter Replacing the Transmitter Battery BATTERY ROUND COVER Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Close If it takes several pushes on the button to lock or unlock the doors and the rear hatch, replace the battery as soon as possible.
Main Menu Table of Contents Seats See pages 12 − 14 for important safety information and warnings about how to properly position the seats and seatbacks. Make all seat adjustments before you start driving. To adjust the seat forward and backward, pull up on the bar under the right side of the seat cushion’s front edge. Move the seat to the desired position and release the bar. Try to move the seat to make sure it is locked in position.
Main Menu Table of Contents Power Windows Your vehicle’s windows are electrically-powered. Turn the ignition switch to the ON (II) position to raise or lower either window. Closing a power window on someone’s hands or fingers can cause serious injury. Make sure your passenger is away from the window before closing it. DRIVER’S WINDOW SWITCH There is a master power window control panel on the dashboard.
Main Menu Table of Contents Mirrors Adjusting the Power Mirrors 4. When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings. TAB SELECTOR SWITCH Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. The inside mirror has day and night positions. The night position reduces glare from headlights behind you.
Main Menu Table of Contents Parking Brake PARKING BRAKE LEVER Driving the vehicle with the parking brake applied can damage the rear brakes and axles. Instruments and Controls To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released (see page 45 ).
Main Menu Table of Contents Interior Convenience Items ACCESSORY POWER SOCKET STORAGE BOX REAR CENTER POCKET BEVERAGE HOLDER GLOVE BOX 70
Main Menu Table of Contents Interior Convenience Items Storage Box Glove Box Always keep the glove box closed while driving. STRAP To open the storage box, pull the strap. Beverage Holder Be careful when you are using the beverage holders. A spilled liquid that is very hot can scald you or your passenger. Spilled liquids can also damage the upholstery, carpeting, and electrical components in the interior. GLOVE BOX Open the glove box by pulling the bottom of the handle. Close it with a firm push.
Main Menu Table of Contents Interior Lights Ceiling Light DOOR ACTIVATED OFF The ceiling light also contains two spotlights. Push the button next to the light to turn it on and off. You can use the spotlights at all times. Cargo Area Light ON The ceiling light has a three-position switch; ON, Door Activated, and OFF. In the Door Activated (center) position, the light comes on when you: Open either door or the rear hatch. Unlock the doors and the rear hatch with the remote transmitter.
Main Menu Features The heating and air conditioning* systems in your vehicle provide a comfortable driving environment in all weather conditions. Your vehicle has an anti-theft audio system that requires a code number to enable it. * Air conditioning is standard on vehicles with automatic transmission (CVT) and standard on most manual transmissions. 73 Features The standard audio system has many features. This section describes those features and how to use them. Vents, Heating, and A/C .............
Main Menu Table of Contents Vents, Heating, and A/C On vehicles without climate control On vehicles with climate control TEMPERATURE CONTROL DIAL ECON BUTTON MODE CONTROL BUTTON TEMPERATURE CONTROL DIAL ECON BUTTON MODE CONTROL BUTTON FAN CONTROL BUTTON AUTO BUTTON DEFROST BUTTON FAN CONTROL BUTTONS RECIRCULATION BUTTON REAR WINDOW DEFOGGER BUTTON 74 DEFROST BUTTON OFF BUTTON RECIRCULATION BUTTON REAR WINDOW DEFOGGER BUTTON
Main Menu Table of Contents Vents, Heating, and A/C On vehicles with automatic transmission (CVT), see page 78 for Automatic Climate Control and Manual Operations information. Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. ECON Button If the A/C is on, pressing this button allows the auto idle stop to work only when the outside temperature is above 41°F (5°C). For more information, see pages 111 and 118 .
Main Menu Table of Contents Vents, Heating, and A/C Airflow is divided between the vents in the dashboard and the floor vents. Air flows from the floor Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents near the rear window. vents. Airflow is divided between the floor vents and the defroster vents at the base of the windshield. Air flows from the defroster vents at the base of the windshield.
Main Menu Table of Contents Vents, Heating, and A/C To Dehumidify the Interior On vehicles with climate control Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry. This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C). To Defog and Defrost To remove fog from the inside of the windows: 1. Set the fan to the desired speed. , the system 2.
Main Menu Table of Contents Vents, Heating, and A/C To Cool or Heat Automatically On vehicles with automatic transmission (CVT) The Automatic Climate Control system can adjust the fan speed and airflow levels to maintain the interior temperature you select. If you set the temperature to its lower limit or its highest limit, the system runs at full cooling or heating only. It does not regulate the interior temperature.
Main Menu Table of Contents Climate Control Sensors Sunlight and Temperature Sensors SUNLIGHT SENSOR Features TEMPERATURE SENSOR The climate control system has two sensors. A sunlight sensor is in the top of the dashboard, and a temperature sensor is next to the steering column. Do not cover the sensors or spill any liquid on them.
Main Menu Table of Contents Playing the Radio AM/FM BUTTON STEREO INDICATOR AUTO SELECT INDICATOR SCAN INDICATOR 80 SCAN BUTTON TUNE KNOB SEEK BAR PWR/VOL KNOB AUTO SELECT BUTTON PRESET BUTTONS
Main Menu Table of Contents Playing the Radio To Play the Radio The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the PWR/VOL knob or the FM/AM button. Adjust the volume by turning the PWR/VOL knob. To Select a Station You can use any of five methods to find radio stations on the selected band: TUNE, SEEK, SCAN, the preset buttons, and AUTO SELECT . TUNE − Use the TUNE knob to tune the radio to a desired frequency.
Main Menu Table of Contents Playing the Radio AUTO SELECT − If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button. ‘‘A.SEL’’ flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM stations in the preset buttons.
Main Menu Table of Contents Radio Reception Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: Radio stations on the AM band are assigned frequencies at least 10 kilohertz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 megahertz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
Main Menu Table of Contents Radio Reception As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter.
Main Menu Table of Contents Playing a CD REPEAT INDICATOR AM/FM BUTTON CD BUTTON CD SLOT EJECT BUTTON REPEAT BUTTON Features SEEK/SKIP BAR RANDOM INDICATOR RANDOM BUTTON PWR/VOL KNOB 85
Main Menu Table of Contents Playing a CD To Play a CD With the ignition switch in the ACCESSORY (I) or the ON (II) position, insert a CD into the CD slot. The drive will pull the CD in the rest of the way and begin to play it. The number of the track playing is shown in the display. The system will continuously play a CD until you change modes. SKIP − Each time you press and release the side of the skip bar, the player skips forward to the beginning of the next track.
Main Menu Table of Contents CD Changer, Protecting Your CDs Operating the Optional CD Changer An optional six disc CD changer is available for your vehicle. This CD changer uses the same controls used for the in-dash CD player. To select the CD changer, press the CD button. The CD and track numbers will be displayed. To select a different CD, use the preset 5 (DISC −) or preset 6 (DISC +) button.
Main Menu Table of Contents Protecting Your CDs, CD Player Error Messages CD Player Error Messages If you see an error message in the display while playing a CD, find the cause in the following chart. If you cannot clear the error message, take the vehicle to your dealer. Error Message Cause FOCUS Error Handle a CD by its edges; never touch either surface. Do not place stabilizer rings or labels on the CD.
Main Menu Table of Contents CD Changer Error Messages If you see an error message in the display while operating the CD changer, find the cause in the chart to the right. If you cannot clear the error message, take the vehicle to your dealer. Error Message Cause FOCUS Error Mechanical Error High temperature No CD magazine in the CD changer Press the magazine eject button and pull out the magazine, check for error message. Insert the magazine again.
Main Menu Table of Contents Radio Theft Protection Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code in the preset buttons. Because there are hundreds of number combinations possible from five-digits, making the system work without knowing the exact code is nearly impossible. You should have received a card that lists your audio system’s code and serial numbers.
Main Menu Table of Contents Setting the Clock If your vehicle’s battery is disconnected or goes dead, you will need to set the clock. CLOCK BUTTON You can quickly set the time to the nearest hour. If the displayed time is before the half hour, press and hold the CLOCK button, and press the R (Preset 6) button to set the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.
Main Menu 92
Main Menu Before Driving Break-in Period ................................ 94 Fuel Recommendation .................... 94 Service Station Procedures ............ 95 Refueling....................................... 95 Opening and Closing the Hood .......................................... 96 Oil Check ...................................... 97 Engine Coolant Check ................ 98 Fuel Economy .................................. 99 Improving Fuel Economy ........... 99 Accessories and Modifications ....
Main Menu Table of Contents Break-in Period, Fuel Recommendation Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Do not change the oil until the scheduled maintenance time. Avoid hard braking for the first 200 miles (300 km).
Main Menu Table of Contents Service Station Procedures Refueling Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. PULL 4. Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. Leave some room for the fuel to expand with temperature changes. If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system.
Main Menu Table of Contents Service Station Procedures 5. Screw the fuel fill cap back on until it clicks at least three times. If you do not properly tighten the cap, the malfunction indicator lamp may come on (see page 180 ). Opening and Closing the Hood 6. Push the fuel fill door closed until it latches. HOOD RELEASE HANDLE 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. LATCH 2.
Main Menu Table of Contents Service Station Procedures Oil Check SUPPORT ROD DIPSTICK CLIP 3. Pull the support rod out of its clip and insert the end into the designated hole in the hood. To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched. Wait a few minutes after turning the engine off before you check the oil. 1.
Main Menu Table of Contents Service Station Procedures Engine Coolant Check RESERVE TANK MAX MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 139 for information on adding the proper coolant. 98 Refer to Owner’s Maintenance Checks on page 128 for information about checking other items on your vehicle.
Main Menu Table of Contents Fuel Economy Improving Fuel Economy Always maintain your vehicle according to the maintenance schedule. See Owner’s Maintenance Checks on page 128 . The build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion. Always drive in the highest gear possible. Try to maintain a constant speed. Every time you slow down and speed up, your vehicle uses extra fuel.
Main Menu Table of Contents Accessories and Modifications Modifying your vehicle, or installing some non-Honda accessories, can make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.
Main Menu Table of Contents Accessories and Modifications Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability. Modifying your steering wheel or any other part of your vehicle’s safety systems could make the systems ineffective.
Main Menu Table of Contents Carrying Cargo Your vehicle has several convenient storage areas: STORAGE BOX Glove box Seat-back pocket Storage box Cargo area Rear center pocket However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
Main Menu Table of Contents Carrying Cargo Load Limits The maximum load for your vehicle is 400 lbs (185 kg). This figure includes the total weight of all occupants, cargo, and accessories. Follow all load limits and other loading guidelines in this manual. 1. Locate the statement, ‘‘the combined weight of occupants and cargo should never exceed 400 lbs’’ on your vehicle’s placard. (The placard is on the driver’s doorjamb.) 2.
Main Menu Table of Contents Carrying Cargo Carrying Items in the Passenger Compartment Store or secure all items that could be thrown around and hurt someone during a crash. Be sure items placed on the floor behind the seats cannot roll under the seats and interfere with the pedals or seat operation. Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.
Main Menu Table of Contents Carrying Cargo Cargo Hooks To secure the cargo, you can use the four cargo hooks on the cargo area. The illustration shows the location of each cargo hook. Air Intake AIR INTAKE The air intake for the IMA battery is located behind the passenger’s seat. Do not block this air intake with any cargo. Do not spill any liquids over the air intake or put any small foreign objects in it. This may damage the IMA battery and the power control unit.
Main Menu 106
Main Menu Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, and the braking system. 107 Driving Preparing to Drive ......................... 108 Starting the Engine........................ 109 Manual Transmission.................... 110 Shift Up/Shift Down Indicators ................................ 111 Engine Speed Limiter ...............
Main Menu Table of Contents Preparing to Drive You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 5. Check the seat adjustment (see page 66 ). 6. Check the adjustment of the inside and outside mirrors (see page 68 ). 2. Check that the hood is fully closed. 7. Make sure the doors and the hatch are securely closed and locked. 3. Visually check the tires.
Main Menu Table of Contents Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual Transmission: Push the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. 4. Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time.
Main Menu Table of Contents Manual Transmission Come to a full stop before you shift into Reverse. You can damage the transmission by trying to shift into reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’ The manual transmission is synchronized in all forward gears for smooth operation.
Main Menu Table of Contents Manual Transmission Shift Up/Shift Down Indicators SHIFT UP INDICATOR The Shift Down indicator prompts you to shift to a lower gear when you are climbing a hill faster than 12 mph (19 km/h), losing speed, and pressing on the accelerator pedal. Road and traffic conditions may require you to shift at times other than those indicated. The Shift Up or Shift Down indicator will come on at the best time to shift to a higher or lower gear for the best fuel economy.
Main Menu Table of Contents Manual Transmission There is adequate vacuum reserve for the power brakes. Auto Idle Stop Indicator AUTO IDLE STOP INDICATOR The engine will start again automatically when you shift to first gear. There is no need to start the engine with the ignition switch. It is recommended that you shift to Neutral and release the clutch pedal while stopped.
Main Menu Table of Contents Automatic Transmission (CVT) Continuously Variable Transmission (CVT) Shift Lever Position Indicators U.S. model Honda’s Continuously Variable Transmission’s unique design provides a smooth, constant flow of power. It is electronically controlled for more precise operation and better fuel economy. If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem in the automatic transmission control system.
Main Menu Table of Contents Automatic Transmission (CVT) Shifting To shift from: P to R R to P N to R D to L N to D D to N L to D R to N RELEASE BUTTON To shift from any position, press firmly on the brake pedal and press the release button on the side of the shift lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or ACCESSORY (I) position. Do this: Press the brake pedal and press the release button on the lever. Press the release button on the lever.
Main Menu Table of Contents Automatic Transmission (CVT) SECOND MODE BUTTON Drive (D) − Use this position for normal driving. The drive position has two modes, Drive (D) and Second (S). You can select the desired mode with the two select buttons on the steering wheel. The ‘‘D’’ indicator remains lit in either mode. ‘‘D’’ INDICATOR ‘‘S’’ INDICATOR Second (S) Mode − In this mode, the transmission selects a lower range of ratios to give better acceleration. Use this mode for driving up or downhill.
Main Menu Table of Contents Automatic Transmission (CVT) You can switch into and out of Second mode with the ignition switch in the ON (II) position and the shift lever in D position. If you turn the ignition switch to the ACCESSORY (I) position in Second mode, the mode is switched to Drive. The ‘‘S’’ indicator also comes on for a few seconds when you turn the ignition switch to the ON(II) position. 116 Low (L) − To shift to Low, press the release button on the side of the shift lever.
Main Menu Table of Contents Automatic Transmission (CVT) Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work. RELEASE BUTTON 1. Set the parking brake. 2. Make sure the ignition switch is in the LOCK (0) position. 3. Put a cloth on the edge of the Shift Lock Release slot cover. Using a small flat-tipped screwdriver or finger nail file, carefully pry on the edge of the cover to remove it.
Main Menu Table of Contents Automatic Transmission (CVT) Auto Idle Stop To maximize fuel economy, your Insight has an Auto Idle Stop function. Under certain conditions, the engine will shut off when you come to a stop. Those conditions are: The engine coolant is nearly up to normal operating temperature. The shift lever is in D or N. You are not pressing on the accelerator pedal. The IMA battery is sufficiently charged (at least 1/3 on the Battery Level Gauge).
Main Menu Table of Contents Automatic Transmission (CVT) Auto Idle Stop Indicator AUTO IDLE STOP INDICATOR If you open the driver’s door when Auto Stop is active, the indicator will blink and you will hear a chime. The chime will stop when you close the door. Always turn the ignition switch to LOCK (0) and remove the key if you are getting out of the vehicle. Driving The indicator blinks as a reminder that the engine has stopped because of the Auto Idle Stop function.
Main Menu Table of Contents Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission. 120 Parking Tips Make sure the windows are closed. Turn off the lights.
Main Menu Table of Contents Braking System Your vehicle is equipped with front disc brakes. The brakes on the rear wheels are drum. A power assist helps reduce the effort needed on the brake pedal. The ABS helps you retain steering control when braking very hard. Constant application of the brakes when going down a long hill builds up heat and reduces their effectiveness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.
Main Menu Table of Contents Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the brakes from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. You should never pump the brake pedal; this defeats the purpose of the ABS. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal as you steer away from the hazard. This is sometimes referred to as ‘‘stomp and steer.
Main Menu Table of Contents Anti-Lock Brakes (ABS), Towing a Trailer Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle; it only helps with steering control during braking. A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without antilock. Towing a Trailer Your vehicle is not designed to tow a trailer; Attempting to do so can void your warranties.
Main Menu 124
Main Menu Maintenance This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself. Tires ................................................ 156 Inflation Guidelines ................... 156 Recommended Tire Pressure ..
Main Menu Table of Contents Maintenance Safety All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off. To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
Main Menu Table of Contents Maintenance Schedule The maintenance schedule assumes you will use your vehicle as normal transportation for passengers and their possessions. You should also follow these recommendations: Avoid exceeding your vehicle’s load limit. This puts excess stress on the engine, brakes, and many other vehicle parts. The load limit is shown on the tire information label on the driver’s doorjamb. Drive your vehicle regularly over a distance of several miles (kilometers).
Main Menu Table of Contents Maintenance Schedule Servicing Your Vehicle Your authorized dealer knows your vehicle best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or skilled person to keep your warranties in effect. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record.
Main Menu Table of Contents 150 240 Maintenance Schedule for Normal Conditions Check engine oil and coolant Check tires Replace engine oil Rotate tires (follow pattern on page 159 ) Replace engine oil filter Check front and rear brake wear Check parking brake adjustment Inspect the following items: Tie-rod ends, steering gearbox, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS) All fluid levels and condition of fluids Exhaust system# Fuel lines and connections# Inspe
Maintenance Schedule for Severe Conditions Main Menu Table of Contents Check engine oil and coolant Check tires Replace engine oil and oil filter Rotate tires (follow pattern on page 159 ) Check front and rear brake wear Inspect the following items: Tie-rod ends, steering gearbox, and boots Suspension components Driveshaft boots Check parking brake adjustment Lubricate all hinges, locks, and latches Inspect the following items: Brake hoses and lines (including ABS) All fluid levels and condition of fluid
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 129 ) or severe conditions (page 130 ). Keep the receipts for all work done on your vehicle.
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) 63,750 mi 102,000 km Signature or dealer stamp mi/km 93,750 mi 150,000 km Date 67,500 mi 108,000 km mi/km mi/km 97,500 mi 156,000 km mi/km 101,250 mi 162,000 km mi/km 105,000 mi 168,000 km mi/km 108,750 mi 174,000 km mi/km 112,500 mi 180,000 km mi/km Date 132 mi/km Date 116,250 mi 186,000 km Date 90,000 mi 144,000 km mi/km Date Date 86,250 mi 138,000 km mi/km Date Date 82,500 mi 132,000 km mi/km Date
Main Menu Table of Contents Maintenance Record (for Normal and Severe Schedules) 123,750 mi 198,000 km Signature or dealer stamp mi/km Date 127,500 mi 204,000 km mi/km Date 131,250 mi 210,000 km mi/km Date 135,000 mi 216,000 km mi/km Date mi/km Maintenance 138,750 mi 222,000 km Date 142,500 mi 228,000 km mi/km Date 146,250 mi 234,000 km mi/km Date 150,000 mi 240,000 km mi/km Date 133
Main Menu Table of Contents Fluid Locations ENGINE OIL FILL CAP CLUTCH FLUID (Gray cap) (Manual Transmission only) BRAKE FLUID (Gray cap) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR AUTOMATIC TRANSMISSION FLUID DIPSTICK (CVT) (Yellow loop) ENGINE OIL DIPSTICK (Orange loop) 134 RADIATOR CAP
Main Menu Table of Contents Adding Engine Oil ENGINE OIL FILL CAP Install the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level. Do not fill above the upper mark; you could damage the engine. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’ API CERTIFICATION SEAL Maintenance Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately.
Main Menu Table of Contents Adding Engine Oil, Changing the Oil and Filter Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals given on the maintenance schedule. Ambient Temperature The oil viscosity or weight is provided on the container’s label.
Main Menu Table of Contents Changing the Oil and Filter WASHER 3. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container. Do not loosen the smaller bolt located above the drain bolt. OIL FILTER 4. Remove the oil filter, and let the remaining oil drain. A special wrench (available from your dealer) is required. Make sure the oil filter gasket is not stuck to the engine block. If it is, remove it before installing a new oil filter.
Main Menu Table of Contents Changing the Oil and Filter 5. Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the connecting surface of a new oil filter. 6. Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 29 lbf·ft (39 N·m , 4.0 kgf·m) 9. Let the engine run for several minutes, then check the drain bolt and oil filter for leaks. 10.
Main Menu Table of Contents Engine Coolant Adding Engine Coolant RESERVE TANK If the reserve tank is completely empty, you should also check the coolant level in the radiator. If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail.
Main Menu Table of Contents Engine Coolant 4. Put the radiator cap back on, and tighten it fully. RADIATOR CAP RESERVE TANK 5. Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank. Do not add any rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or engine components. 1.
Main Menu Table of Contents Windshield Washers Check the fluid level in the windshield washer reservoir at least monthly during normal use. This reservoir supplies the windshield and rear window washers. LEVEL GAUGE Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.
Main Menu Table of Contents Transmission Fluid Automatic Transmission (CVT) U.S. model 2. Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth. 5. If the level is below the lower mark, add fluid into the filler hole to bring it to the upper mark. Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. UPPER MARK LOWER MARK HOT DIPSTICK 1. Park the vehicle on level ground.
Main Menu Table of Contents Transmission Fluid To thoroughly flush the transmission, the technician should drain and refill it with Honda CVT fluid, then drive the vehicle for a short distance. Do this three times. Then drain and refill the transmission a final time. Manual Transmission 6. Insert the dipstick all the way back into the transmission securely as shown in the illustration. If you added fluid, return to step 1 to recheck the fluid level.
Main Menu Table of Contents Transmission Fluid, Brake and Clutch Fluid If Honda MTF is not available, you may use an SAE 10W-30 or 10W-40 viscosity motor oil with the API Certification seal that says ‘‘FOR GASOLINE ENGINES’’ as a temporary replacement. However, motor oil does not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient.
Main Menu Table of Contents Brake and Clutch Fluid Brake System Clutch System MAX MAX MIN Maintenance The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads. MIN The fluid level should be between the MIN and MAX marks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level.
Main Menu Table of Contents Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area, readjustment may be required. Adjustments should be performed by your dealer or other qualified mechanic. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its steel base and protect the glass from contact with your skin or hard objects.
Main Menu Table of Contents Lights WEATHER SEAL BULB 4. Unclip the end of the hold-down wire from its slot. Pivot it out of the way, and remove the bulb. Replacing a Front Parking Light Bulb 5. Insert the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place, and clip the end into the slot. CONNECTOR HOLD-DOWN WIRE 3. Remove the rubber weather seal by pulling on the tab. 7. Push the electrical connector onto the tabs of the new bulb.
Main Menu Table of Contents Lights 4. Install the socket back into the headlight assembly. Turn it clockwise to lock it in place. Replacing the Front Side Marker/ Turn Signal Light Bulb 5. Turn on the lights to make sure the new bulb is working. 1. To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, turn the steering wheel to the left. 2.
Main Menu Table of Contents Lights 6. Install the socket back into the headlight assembly. Turn it clockwise to lock it in place. Replacing Rear Bulbs COVER 7. Turn on the lights to make sure the new bulb is working. 8. Put the inner fender cover in place. Tighten the screw securely. 2. Pull the cover back. 4. Remove the two covers. Remove the two screws holding the rear light assembly. Remove the light assembly. 3. Loosen the nut holding the rear light assembly. CONTINUED 149 Maintenance 1.
Main Menu Table of Contents Lights 7. Reinstall the socket into the light assembly by turning it clockwise until it locks. 8. Turn on the lights to make sure the new bulb is working. 9. Reinstall the light assembly and tighten the two screws and nut. 10.Reinstall the two covers in the rear light assembly. 5. Determine which bulb, brake/ taillight, back-up light, side marker light or turn signal is burned out. Remove the socket for that bulb by turning counterclockwise. 6.
Main Menu Table of Contents Cleaning the Seat Belts, Floor Mats Cleaning the Seat Belts Floor Mats LOOP Maintenance If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly.
Main Menu Table of Contents Dust and Pollen Filter, Roof Antenna Dust and Pollen Filter The dust and pollen filter removes pollen and dust from the outside air the climate control system brings into the interior. It should be replaced according to the time and distance recommendations in the maintenance schedule. This filter should be replaced every 30,000 miles (48,000 km) under normal conditions.
Main Menu Table of Contents Rear Wheel Skirt, Wiper Blades Rear Wheel Skirt Although almost all exterior panels on your Honda are made of hardened aluminum, they may dent more easily than steel under some conditions. Exercise care when leaning on or over any part of the body. Wiper Blades Check the condition of the wiper blades at least every 6 months. Replace them if you find signs of cracking in the rubber, and areas that are getting hard or if they leave streaks and unwiped areas when used.
Main Menu Table of Contents Wiper Blades WIPER ARMS BLADE LOCK TAB To replace a front wiper blade: 1. Raise the wiper arm off the windshield. Do not open the hood when the wiper arms are raised, or you will damage the hood and the wiper arms. 154 2. Disconnect the blade assembly from the wiper arm by pushing in the lock tab. Hold the lock tab in while you push the blade assembly toward the base of the arm. 3. Remove the blade from its holder by grasping the tabbed end of the blade.
Main Menu Table of Contents Wiper Blades BLADE 5. Slide the new wiper blade into the holder until the tabs lock. 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm down against the windshield. REINFORCEMENT To replace a rear wiper blade: 1. Raise the wiper arm off the rear window. 2. Pull one end of the blade out from the holder. 3. Slide the blade out of the holder. 4. Slide the new blade into the holder.
Main Menu Table of Contents Wiper Blades, Tires Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced. 5. Insert both ends of the blade into the holder. Make sure they are secure. 6. Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place. 7. Lower the wiper arm.
Main Menu Table of Contents Tires Use a gauge to measure the air pressure at least once a month. Even tires that are in good condition may lose one to two psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm ) per month. Remember to check the spare tire at the same time. Check the pressure in the tires when they are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). You should use your own tire pressure gauge whenever you check your tire pressures.
Main Menu Table of Contents Tires Tire Inspection Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear. INDICATOR LOCATION MARKS You should look for: Bumps or bulges in the tread or side of the tire. Replace the tire if you find either of these conditions. Cuts, splits, or cracks in the side of the tire. Replace the tire if you can see fabric or cord. Excessive tread wear.
Main Menu Table of Contents Tires Tire Rotation Front Front (For Non-directional (For Directional Tires and Wheels) Tires and Wheels) It is best to replace all four tires at the same time. If that is not possible or necessary, replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match those of the original wheels.
Main Menu Table of Contents Tires Wheels and Tires Specifications Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Wheels: 14 x 5 1/2 JJ Always use the size and type of tires recommended in this owner’s manual. See page 196 for DOT tire quality grading information, and page 198 for tire size and labeling information.
Main Menu Table of Contents Tires Snow Tires If you mount snow tires on your vehicle, make sure they are radial tires of the same size and load range as original tires. Mount snow tires on all four wheels. The traction provided by snow tires on dry roads may be lower than your original tires. Check with the tire dealer for maximum speed recommendations.
Main Menu Table of Contents Checking the Battery TEST INDICATOR WINDOW Check the condition of the battery monthly by looking at the test indicator window. The label on the battery explains the test indicator’s colors. 162 Check the terminals for corrosion (a white or yellowish powder). To remove it, cover the terminals with a solution of baking soda and water. It will bubble up and turn brown. When this stops, wash it off with plain water. Dry off the battery with a cloth or paper towel.
Main Menu Table of Contents Vehicle Storage If you need to park your vehicle for an extended period (more than 1 month), there are several things you should do to prepare it for storage. Proper preparation helps prevent deterioration and makes it easier to get your vehicle back on the road. If possible, store your vehicle indoors. If the vehicle is to be stored for a longer period, it should be supported on jackstands so the tires are off the ground.
Main Menu 164
Main Menu Taking Care of the Unexpected This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed. 165 Taking Care of the Unexpected Compact Spare Tire....................... 166 Changing a Flat Tire ...............
Main Menu Table of Contents Compact Spare Tire Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Check the compact spare tire inflation pressure every time you check the other tires. It should be inflated to: 60 psi (420 kPa , 4.2 kgf/cm ) Follow these precautions: Never exceed 50 mph (80 km/h). This tire gives a harsher ride and less traction on some road surfaces. Use greater caution while driving.
Main Menu Table of Contents Changing a Flat Tire If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area that is far away from the traffic lanes. The vehicle can easily roll off the jack, seriously injuring anyone underneath. 2. Turn on the hazard warning indicators, and turn the ignition switch to LOCK (0). Have your passenger get out of the vehicle while you change the tire. 3. Open the hatch.
Main Menu Table of Contents Changing a Flat Tire REAR WHEEL SKIRT CENTER CAP STUD FASTENER 7. Rear tire only: Use the end of the extension or a flat-tipped screwdriver to loosen the two stud fasteners holding the rear wheel skirt. 168 8. Pull the rear wheel skirt downward. Do not catch your clothes or hands on the hooks on the rear fender when you replace the wheel. 9. Remove the center cap from the wheel with the end of the extension or a flat-tipped screwdriver. 10.
Main Menu Table of Contents Changing a Flat Tire JACKING POINT EXTENSION 12.Use the extension and wheel wrench as shown to raise the vehicle until the flat tire is off the ground. 13.Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. CONTINUED 169 Taking Care of the Unexpected 11.Place the jack under the jacking point nearest the tire you need to change.
Main Menu Table of Contents Changing a Flat Tire HUB 14.Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. 170 15.Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten them fully. 16.Lower the vehicle to the ground, and remove the jack.
Main Menu Table of Contents Changing a Flat Tire TAB SLOT 18.To install the rear wheel skirt, place the skirt against the body. Line up the slots on the skirt with the tabs in the body, then push the skirt upward. Make sure the wheel skirt is installed correctly. 19.Tighten the two stud fasteners. Align the ▼ marks on the stud fastener with the ● marks on the wheel skirt. It is not recommended to drive your vehicle without the wheel skirts. It will af f ect the f uel consumption.
Main Menu Table of Contents Changing a Flat Tire WING BOLT SPACER CONE 23.Store the jack and tool kit back in the spare tire well. Loose items can fly around the interior in a crash and could seriously injure the occupants. Store the wheel, jack, and tools securely before driving. 20.Place the flat tire face down in the spare tire well. 24.Store the center cap in the spare tire well. Make sure it does not get scratched or damaged. 21.
Main Menu Table of Contents If the Engine Won’t Start Diagnosing why the engine won’t start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position: You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly. Check the transmission interlock. If you have a manual transmission, the clutch pedal must be pushed all the way to the floor or the starter will not operate.
Main Menu Table of Contents If the Engine Won’t Start If the headlights dim noticeably or go out when you try to start the engine, either the battery is discharged or the connections are corroded. Check the condition of the battery and terminal connections (see page 162 ). You can then try jump starting the vehicle from a booster battery (see page 175 ).
Main Menu Table of Contents Jump Starting Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. Keep all sparks, open flames, and smoking materials away from the battery. 1. Open the hood, and check the physical condition of the battery. In very cold weather, check the condition of the electrolyte. If it seems slushy or frozen, do not try jump starting until it thaws.
Main Menu Table of Contents Jump Starting 6. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. 7. Once the vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, and then from the booster battery. 4. Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the grounding strap as shown.
Main Menu Table of Contents If the Engine Overheats The reading on your vehicle’s temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If your vehicle overheats, you should take immediate action. The only indication may be the temperature gauge reading reaching the red mark. Or you may see steam or spray coming from under the hood. Do not open the hood if steam is coming out. 1.
Main Menu Table of Contents If the Engine Overheats 6. If you do not find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is below the MIN mark. 7. If there was no coolant in the reserve tank, you may need to add coolant to the radiator. Let the engine cool down until the reading reaches the middle of the temperature gauge or lower before checking the radiator.
Main Menu Table of Contents Low Oil Pressure Indicator This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and you should take immediate action. Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the vehicle stopped. 1. Safely pull off the road, and shut off the engine.
Main Menu Table of Contents Charging System Indicator, Malfunction Indicator Lamp Charging System Indicator If the charging system indicator comes on brightly when the engine is running, the battery is not being charged. Immediately turn off all electrical accessories. Try not to use other electrically operated controls such as the power windows. Keep the engine running; starting the engine will discharge the battery rapidly. Go to a service station or garage where you can get technical assistance.
Main Menu Table of Contents Malfunction Indicator Lamp Readiness Codes Your vehicle has certain ‘‘readiness codes’’ that are part of the on-board diagnostics for the emissions systems. In some states, part of the emissions testing is to make sure these codes are set. If they are not set, the test cannot be completed. If your 12 volt vehicle’s battery has been disconnected or gone dead, these codes are erased. It takes at least three days of driving under various conditions to set the codes again.
Main Menu Table of Contents Brake System Indicator The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. If the brake system indicator comes on while driving, the brake fluid level is probably low. Press lightly on the brake pedal to see if it feels normal.
Main Menu Table of Contents Emergency Towing If your vehicle needs to be towed, call a professional towing service or organization. Never tow your vehicle with just a rope or chain. It is very dangerous. There are two ways to tow your vehicle: Flat-bed Equipment − The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. 5-speed Manual Transmission: Release the parking brake. Shift the transmission to neutral.
Main Menu Table of Contents Emergency Towing The steering system can be damaged if the steering wheel is locked. Leave the ignition switch in the ACCESSORY (I) position, and make sure the steering wheel turns f reely bef ore you begin towing. If Your Vehicle Gets Stuck If your vehicle gets stuck in sand, mud, or snow, call a towing service to pull it out (see page 183 ).
Main Menu Table of Contents Emergency Towing, Fuses Fuses To avoid damage to your vehicle, use the towing hook f or straight, f lat ground towing only. Do not tow at an angle. The tow hook should not be used to tow the vehicle onto a f lat bed. Do not use it as a tie down. INTERIOR UNDER-HOOD The under-hood fuse box is in the engine compartment. To open it, push the tabs as shown. CONTINUED 185 Taking Care of the Unexpected The interior fuse is underneath the dashboard on the driver’s side.
Main Menu Table of Contents Fuses Checking and Replacing Fuses If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse. Determine from the chart on pages 188 and 189 , or the diagram on the fuse box lid, which fuse or fuses control that device. Check those fuses first, but check all the fuses before deciding that a blown fuse is the cause. Replace any blown fuses, and check if the device works. 1. Turn the ignition switch to the LOCK (0) position.
Main Menu Table of Contents Fuses BLOWN If you replace the blown fuse with a spare fuse that has a lower rating, it might blow out again. This does not indicate anything wrong. Replace the fuse with one of the correct rating as soon as you can. 6. If the replacement fuse of the same rating blows in a short time, there is probably a serious electrical problem with your vehicle. Leave the blown fuse in that circuit, and have your vehicle checked by a qualified mechanic.
Main Menu Table of Contents Fuse Locations INTERIOR FUSE BOX No. Amps. 20 21 22 23 24 25 26 27 10 A 10 A 20 A 7.5 A 7.5 A − 10 A 7.5 A Circuits Protected Radio Daytime Running Light* Door Lock Tailgate Lock IMA Not used Rear Wiper Back Light * : Canadian model only No. Amps. 1 2 3 4 5 6 7 8 9 10 188 10 A 15 A 20 A 7.5 A 7.5 A 7.5 A 15 A 20 A 7.5 A 20 A Circuits Protected SRS Fuel Pump, SRS Front Wiper FI-ECU Turn Light Meter IG Coil Power Window, Passenger Starter Signal Power Window, Driver No.
Main Menu Table of Contents Fuse Locations UNDER-HOOD FUSE BOX No. Amps. 50 A 80 A 30 A 10 A 15 A 10 A 15 A 15 A − 15 A IG1 Main Battery ABS Motor Hazard IMA Horn Stop Fuel Pump Left Headlight Not used Right Headlight No. Amps. 11 12 13 14 15 16 17 18 19 20 30 A 40 A 30 A 20 A 40 A 30 A 40 A 7.
Main Menu 190
Main Menu Technical Information The diagrams in this section give you the dimensions and capacities of your vehicle, and the locations of the identification numbers. It also includes information you should know about your vehicle’s tires and emissions control systems. Identification Numbers ................. 192 Specifications ................................. 194 DOT Tire Quality Grading (U.S. Vehicles) ....................... 196 Uniform Tire Quality Grading ...................................
Main Menu Table of Contents Identification Numbers Your vehicle has several identifying numbers in various places. VEHICLE IDENTIFICATION NUMBER The vehicle identification number (VIN) is the 17-digit number your Honda dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver’s side.
Main Menu Table of Contents Identification Numbers The engine number is stamped into the engine block. ENGINE NUMBER TRANSMISSION NUMBER AUTOMATIC TRANSMISSION (CVT) NUMBER The transmission number is on a label on top of the transmission. The IMA Motor Number is stamped on the motor housing.
Table of Contents Main Menu Specifications Dimensions Length Width Height Wheelbase Track 155.0 in (3,938 mm) 66.7 in (1,695 mm) 53.3 in (1,355 mm) 94.5 in (2,400 mm) 56.5 in (1,435 mm) 52.2 in (1,325 mm) Front Rear Weights Gross vehicle weight rating Engine Type Bore x Stroke Displacement Compression ratio Spark plugs*1 M/T CVT See the certification label attached to the driver’s doorjamb. Water cooled 4-stroke SOHC VTEC in line 3-cylinder gasoline engine 2.8 x 3.21 in (72 x 81.5 mm) 60.
Main Menu Table of Contents Specifications Air Conditioning Refrigerant type Charge quantity Lubricant type HFC-134a (R-134a) 17.6−19.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between the tread shoulder and the maximum section width.
Main Menu Table of Contents DOT Tire Quality Grading (U.S. Vehicles) Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
Main Menu Table of Contents Tire Labeling The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. 14 − Rim diameter in inches. FW6X − Tire type code. 78 − Load index (a numerical code associated with the maximum load the tire can carry). 2202 Tire Size Whenever tires are replaced, they should be replaced with tires of the same size. Following is an example of tire size with an explanation of what each component means.
Main Menu Table of Contents Emissions Controls The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
Main Menu Table of Contents Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include three systems: PGM-FI, ignition timing control, and three way catalytic converter. These three systems work together to control the engine’s combustion and minimize the amount of HC, CO, and NOx that comes out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
Main Menu Table of Contents Three Way Catalytic Converter The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent.
Main Menu Table of Contents State Emissions Testing Testing of Readiness Codes If you take your vehicle for a state emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
Main Menu Warranty and Customer Relations 203 Warranty and Customer Relations Customer Service Information ................................. 204 Warranty Coverages ..................... 205 Reporting Safety Defects (U.S. Vehicles) ........................... 206 Authorized Manuals ......................
Main Menu Table of Contents Customer Service Information Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s management. The service manager or general manager can help. Almost all problems are solved in this way.
Main Menu Table of Contents Warranty Coverages U.S. Owners Your new vehicle is covered by these warranties: Emissions Control Systems Defects Warranty and Emissions Performance Warranty − these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty − this warranty gives up to 100 percent credit toward a replacement battery.
Main Menu Table of Contents Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc. 206 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Main Menu Table of Contents Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) Valid only for sales within the United States. Canadian owners should contact their authorized Honda dealer. The publications shown below can be purchased from Helm Incorporated. You can order in any of three ways: Detach and mail the order form on the right half of this page Call Helm Inc. at 1-800-782-4356 (credit card orders only) Go online at www. helminc.
Main Menu Table of Contents Authorized Manuals NOTE: Dealers and Companies please provide dealer or company name, and also the name of the person to whose attention the shipment should be sent. For purchases outside U.S.A. please write to the address shown below for a quotation. S H I P T O Customer Name Attention Street Address − No P.O.
Main Menu Index A B Battery Charging System Indicator............................ 44, 180 Jump Starting ............................. 175 Maintenance ............................... 162 Specifications ............................. 195 Before Driving ................................. 93 Belts, Seat ................................... 10, 18 Beverage Holder .............................. 71 Booster Seats ................................... 35 Brakes Anti-lock System (ABS) ............
Main Menu Index C Capacities Chart............................. 194 Carbon Monoxide Hazard .............. 38 Carrying Cargo .............................. 102 CAUTION, Explanation of ............... ii CD Care ............................................ 87 CD Player Error Message .............. 88 CD Changer Error Message .......... 89 CD Player.......................................... 85 Ceiling Light ..................................... 72 Certification Label .........................
Main Menu Index Downshifting, Manual Transmission .............................. 110 Driver and Passenger Safety ............ 7 Driving ............................................ 107 Economy ....................................... 99 Dust and Pollen Filter ................... 152 E F Fan, Interior...................................... 75 Features ............................................ 73 Filling the Fuel Tank ....................... 95 Filter Dust and Pollen .......................... 152 Oil ...
Main Menu Index G Gas Mileage, Improving.................. 99 Gasoline ............................................ 94 Fuel Reserve Indicator ................ 46 Gauge ............................................ 49 Octane Requirement ................... 94 Tank, Filling the........................... 95 Gas Station Procedures................... 95 Gauges Engine Coolant Temperature .... 49 Fuel ................................................ 49 Gearshift Lever Positions Automatic Transmission (CVT) ......
Main Menu Index J Jacking up the Vehicle .................. 169 Jack, Tire ........................................ 167 Jump Starting ................................. 175 K Hatch ............................................. 63 Power Door .................................. 62 Low Coolant Level ........................... 98 Low Fuel Indicator .......................... 46 Lower Gear, Downshifting to a.... 110 Low Oil Pressure Indicator .... 44, 179 Lubricant Specifications Chart ....
Main Menu Index Overheating, Engine ..................... 177 Owner’s Maintenance Checks ..... 128 Oxygenated Fuels ............................ 94 Using Child Seats with Tethers...................................... 33 Protecting Larger Children ............ 34 Protecting Small Children .............. 29 P R Panel Brightness Control ............... 57 Park Gear Position......................... 114 Parking ............................................ 120 Parking Brake ..................................
Main Menu Index Spare Tire Inflating ....................................... 166 Specifications ............................. 195 Specifications Charts..................... 194 Spotlights .......................................... 72 SRS, Additional Information........... 21 Additional Safety Precautions .... 24 Airbag Service .............................. 23 How the SRS Indicator Works ........................................ 23 How Your Front Airbags Work..........................................
Main Menu Index Tire Chains ..................................... 161 Tire, How to Change a Flat .......... 167 Tire Information ............................ 198 Tire Labeling .................................. 198 Tires ................................................ 156 Air Pressure ............................... 157 Checking Wear .......................... 158 Compact Spare ........................... 166 DOT Tire Quality Grading ....... 196 Inflation .......................................
Main Menu Service Information Summary Gasoline: Unleaded gasoline, pump octane number of 87 or higher. Fuel Tank Capacity: 10.6 US gal (40 ) Recommended Engine Oil: API Premium grade 0W-20 detergent oil (see page 135 ). Oil change capacity (including filter): 2.6 US qt (2.5 ) CVT Fluid: Use Honda CVT fluid (continuously variable transmission fluid) only. Capacity: 5.8 US qt (5.