Main Menu Introduction Congratulations! Your selection of a 2009 Honda Element was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner's manual in your vehicle so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
Main Menu Introduction California Proposition 65 Warning WARNING: This product contains or emits chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Event Data Recorders This vehicle is equipped with one or more devices commonly referred to as event data recorders. These devices record front seat belt use, front passenger seat occupancy, airbag deployment data, and the failure of any airbag system component.
Main Menu A Few Words About Safety Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. You will find this important safety information in a variety of forms, including: ● ● To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Safety Labels - on the vehicle.
Main Menu Important Handling Information Your Element has higher ground clearance than a passenger vehicle designed for use only on pavement. Higher ground clearance has many advantages for off-highway driving. It allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier. These advantages come at some cost. Because your vehicle is taller and rides higher off the ground, it has a high center of gravity.
2009 Element Online Reference Owner's Manual Contents Owner's Identification Form Introduction .......................................................................................................................................................... i A Few Words About Safety .............................................................................................................................. iii Important Handling Information .........................................................................
Main Menu Overview of Contents Contents A convenient reference to the sections in this manual. Your Vehicle at a Glance A quick reference to the main controls in your vehicle. Driver and Passenger Safety Important information about the proper use and care of your vehicle's seat belts, an overview of the supplemental restraint system, and valuable information on how to protect children with child restraints.
Main Menu Your Vehicle at a Glance DRIVER'S FRONT AIRBAG (P. 9, 25) Your Vehicle at a Glance INSTRUMENT PANEL (P. 57) GAUGES (P. 64) PASSENGER'S FRONT AIRBAG (P. 9, 25) POWER DOOR LOCK SWITCH (P. 80) HEATING/COOLING CONTROLS (P. 104) MIRROR CONTROLS (P. 93) POWER WINDOW SWITCHES (P. 92) USB ADAPTER CABLEꭧ (P. 164, 177) HOOD RELEASE HANDLE (P. 200) PARKING BRAKE (P. 94) AUTOMATIC TRANSMISSION (P. 219) MANUAL TRANSMISSION (P. 217) A/T model with navigation system is shown.
Main Menu Your Vehicle at a Glance HEADLIGHTS/TURN SIGNALS (P. 71) WINDSHIELD WIPERS/WASHERS (P. 70) PASSENGER AIRBAG OFF INDICATOR (P. 32) NAVIGATION SYSTEM VOICE CONTROL BUTTONSꭧ3 AUDIO SYSTEM (P. 109) DIGITAL CLOCK (P. 189) REMOTE AUDIO CONTROLSꭧ2 (P. 191) ACCESSORY POWER SOCKET (P. 100) VSA OFF SWITCH (P. 231) REAR WINDOW DEFOGGER BUTTON (P. 74) HORNꭧ1 HAZARD WARNING BUTTON (P. 73) STEERING WHEEL ADJUSTMENT (P. 74) CRUISE CONTROL BUTTONS (P. 193) A/T model with navigation system is shown.
Main Menu Driver and Passenger Safety Important Safety Precautions............. 6 Your Vehicle's Safety Features .......... 7 Seat Belts ..................................... 8 Airbags ........................................ 9 Protecting Adults and Teens ........... 11 1. Close and Lock the Doors........ 11 2. Adjust the Front Seats ............. 11 3. Adjust the Seat-Backs .............. 12 4. Adjust the Head Restraints ...... 13 5. Fasten and Position the Seat Belts ..................................
Main Menu Table Of Contents Important Safety Precautions You'll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them.
Main Menu Table Of Contents Your Vehicle's Safety Features (11) (8) (3) (9) (4) (7) (1) (5) (10) (2) (8) (6) (2) (1) Safety Cage (2) Crush Zones (3) Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Front Airbags (8) Side Airbags (9) Side Curtain Airbags (10) Front Seat Belt Tensioners (11) Door Locks Some features do not require any action on your part.
Main Menu Table Of Contents Your Vehicle's Safety Features Seat Belts Your vehicle is equipped with seat belts in all seating positions. ● Not wearing a seat belt properly increases the chance of serious injury or death in a crash, even though your vehicle has airbags. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. Be sure you and your passengers always wear seat belts and wear them properly.
Main Menu Table Of Contents Your Vehicle's Safety Features Airbags In addition, your vehicle has side curtain airbags to help protect the heads of the driver, front passenger, and passengers in the outer rear seating positions during a moderate to severe side impact or rollover (see page 30 for more information on how your side curtain airbags work).
Main Menu Table Of Contents Your Vehicle's Safety Features The most important things you need to know about your airbags are: ● Airbags do not replace seat belts. They are designed to supplement the seat belts. ● ● Airbags offer no protection in rear impacts, or minor frontal or side collisions. What you should do: Always wear your seat belt properly, and sit upright and as far back from the steering wheel as possible while allowing full control of the vehicle.
Main Menu Table Of Contents Protecting Adults and Teens See pages 35 - 51 for important guidelines on how to properly protect infants, small children, and larger children who ride in your vehicle. 1. Close and Lock the Doors After everyone has entered the vehicle, be sure the doors, the hatch, and the tailgate are closed and locked. 2.
Main Menu Table Of Contents Protecting Adults and Teens The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. In addition to adjusting the seat, you can adjust the steering wheel up and down (see page 74). Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position. 3. Adjust the Seat-Backs See page 83 for how to adjust the front seats.
Main Menu Table Of Contents Protecting Adults and Teens 4. Adjust the Head Restraints Improperly positioning head restraints reduces their effectiveness and you can be seriously injured in a crash. Adjust the seat-back to an upright position, and sit well back in the seat. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt.
Main Menu Table Of Contents Protecting Adults and Teens If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. 5. Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash.
Main Menu Table Of Contents Protecting Adults and Teens Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. This could cause If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt. Using a seat belt that is not working properly can result in serious injury or death. Have your dealer check the belt as soon as possible.
Main Menu Table Of Contents Protecting Adults and Teens Advice for Pregnant Women When driving, remember to sit upright and adjust the seat as far back as possible while allowing full control of the vehicle. When riding as a front passenger, adjust the seat as far back as possible. This will reduce the risk of injuries to both you and your unborn child that can be caused by a crash or an inflating front airbag.
Main Menu Table Of Contents Protecting Adults and Teens ● Do not put any accessories on seat belts. Devices intended to improve ● Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inflates. ● ● Keep your hands and arms away from the airbag covers.
Main Menu Table Of Contents Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all four seating positions. The front seat belts are also equipped with automatic seat belt tensioners. This system uses the same sensors as the front airbags to monitor whether the front seat belts are latched or unlatched, and how much weight is on the front passenger's seat (see page 27).
Main Menu Table Of Contents Additional Information About Your Seat Belts To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page 14 for how to properly position the belt). To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
Main Menu Table Of Contents Additional Information About Your Seat Belts Automatic Seat Belt Tensioners The tensioners are designed to activate in any collision severe enough to cause the front airbags to deploy, or if a sensor detects your vehicle is about to roll over (see page 30). If a side curtain airbag deploys during a side impact, the tensioner on that side of the vehicle will also deploy. For added protection, the front seat belts are equipped with automatic seat belt tensioners.
Main Menu Table Of Contents Additional Information About Your Seat Belts The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced. Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed. Driver and Passenger Safety If a seat belt is worn during a crash, it must be replaced by your dealer.
Main Menu Table Of Contents Additional Information About Your Airbags Airbag System Components (8) (9) (2) (13) (10) (11) (12) (5) (1) (1) Driver's Front Airbag (3) (2) Passenger's Front Airbag (3) Control Unit (4) Front Seat Belt Tensioners (5) (5) Side Airbags (6) Driver's Seat Position Sensor (7) Front Passenger's Weight Sensors (8) Front Impact Sensors (9) Passenger Airbag Off Indicator (10) Side Impact Sensors (First) (11) Occupant Position Detection System (OPDS) Sensors (12) Supplemental Re
Main Menu Table Of Contents Additional Information About Your Airbags Your airbag system includes: (16) ● ● Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked ‘‘SIDE AIRBAG’’ (see page 28). Two side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling, above the side windows. The front and rear pillars are marked ‘‘SIDE CURTAIN AIRBAG’’ (see page 30).
Main Menu Table Of Contents Additional Information About Your Airbags ● ● ● ● ● Automatic front seat belt tensioners (see page 20). ● Sensors that can detect a moderate to severe front impact, side impact, or rollover. Sensors that can detect whether a child is in the passenger's side airbag path and signal the control unit to turn the airbag off (see page 29). ● Sensors that can detect whether the driver's seat belt and the front passenger's seat belt are latched or unlatched (see page 18).
Main Menu Table Of Contents Additional Information About Your Airbags How Your Front Airbags Work Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. If you ever have a moderate to severe frontal collision, sensors will detect the vehicle's rapid deceleration. This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy.
Main Menu Table Of Contents Additional Information About Your Airbags The total time for inflation and deflation is one-tenth of a second, so fast that most occupants are not aware that the airbags deployed until they see them lying in their laps. After a crash, you may see what looks like smoke. This is actually powder from the airbag's surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort.
Main Menu Table Of Contents Additional Information About Your Airbags Advanced Airbags For both advanced airbags to work properly: ● ● ● Occupants must sit upright and wear their seat belts properly. Do not spill any liquids on or under the seats, cover the sensors, or put any objects or metal items under the front seats. Back-seat passengers should not put their feet under the front seats. Failure to follow these instructions could damage the sensors or prevent them from working properly.
Main Menu Table Of Contents Additional Information About Your Airbags When the airbag is turned off, a ‘‘passenger airbag off’’ indicator in the center of the dashboard comes on (see page 32). If the weight sensors detect there is no passenger in the front seat, the airbag will be off. However, the passenger airbag off indicator will not come on.
Main Menu Table Of Contents Additional Information About Your Airbags Side Airbag Cutoff System To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats. Although Honda does not encourage children to ride in front, if the position sensors detect a child has leaned into the side airbag's deployment path, the airbag will shut off.
Main Menu Table Of Contents Additional Information About Your Airbags How Your Side Curtain Airbags Work SIDE CURTAIN AIRBAG If the impact is on the passenger's side, the passenger's side curtain airbag will inflate even if there are no occupants on that side of the vehicle. In a Rollover If the rollover sensor detects your vehicle is about to roll over, it signals the control unit, which immediately deploys both side curtain airbags and activates both front seat belt tensioners.
Main Menu Table Of Contents Additional Information About Your Airbags When you turn the ignition switch to the ON (II) position, this indicator comes on briefly then goes off. This tells you the system is working properly. If the indicator comes on at any other time, or does not come on at all, you should have the system checked by your dealer. For example: ● ● ● If the SRS indicator does not come on after you turn the ignition switch to the ON (II) position.
Main Menu Table Of Contents Additional Information About Your Airbags How the Side Airbag Off Indicator Works U.S. Canada This indicator alerts you that the passenger's side airbag has been automatically shut off. It does not mean there is a problem with your side airbags. When you turn the ignition switch to the ON (II) position, the indicator should come on briefly and then go off (see page 59).
Main Menu Table Of Contents Additional Information About Your Airbags ● ● ● Any items under the front passenger's seat. Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced if: ● An airbag ever inflates. Any airbag that has deployed must be replaced along with the control unit and other related parts. Any seat belt tensioner that activates must also be replaced.
Main Menu Table Of Contents Additional Information About Your Airbags Additional Safety Precautions ● ● Do not attempt to deactivate your airbags. Together, airbags and or covering front seat-back covers can prevent your side airbags from inflating during a side impact. seat belts provide the best protection. ● Do not tamper with airbag components or wiring for any reason. Tampering could cause the airbags to deploy, possibly causing very serious injury.
Main Menu Table Of Contents Protecting Children - General Guidelines Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to properly protect child passengers. If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.
Main Menu Table Of Contents Protecting Children - General Guidelines All Children Should Sit in a Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.
Main Menu Table Of Contents Protecting Children - General Guidelines U.S. Models SUN VISORS DASHBOARD Driver and Passenger Safety To remind you of the passenger's front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
Main Menu Table Of Contents Protecting Children - General Guidelines If You Must Drive with Several Children Your vehicle has two back seats where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: ● ● ● ● Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page 49). Move the vehicle seat as far to the rear as possible (see page 83).
Main Menu Table Of Contents Protecting Children - General Guidelines Additional Safety Precautions ● ● Never hold an infant or child on your lap. If you are not wearing a ● Never put a seat belt over yourself and a child. During a crash, the belt could press deep into the child and cause serious or fatal injuries. ● Never let two children use the same seat belt. If they do, they could be very seriously injured in a crash. seat belt around their neck, they can be seriously or fatally injured.
Main Menu Table Of Contents Protecting Infants and Small Children Protecting Infants Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rearfacing, reclining mode. Do not put a rear-facing child seat in a forward-facing position. If placed facing forward, an infant could be very seriously injured during a frontal collision.
Main Menu Table Of Contents Protecting Infants and Small Children Placing a rear-facing child seat in the front seat can result in serious injury or death during a collision. Always place a rear-facing child seat in the back seat, not the front. Protecting Small Children We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat. Child Seat Placement We strongly recommend placing a forward-facing child seat in a back seat, not the front.
Main Menu Table Of Contents Protecting Infants and Small Children, Selecting a Child Seat Even with advanced front airbags that automatically turn the passenger's front airbag off (see page 32), a back seat is the safest place for a small child. If it is necessary to put a forwardfacing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.
Main Menu Table Of Contents Selecting a Child Seat, Installing a Child Seat 3. The child seat should fit the vehicle seating position (or positions) where it will be used. 1. Properly secure the child seat to the vehicle. All child seats must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (lower anchors and tethers for children) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash. 2.
Main Menu Table Of Contents Installing a Child Seat Installing a Child Seat with LATCH MARKS ANCHOR COVER LOWER ANCHORS Your vehicle is equipped with LATCH (lower anchors and tethers for children) at the rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anchor point. To install a LATCH-compatible child seat: 1.
Main Menu Table Of Contents Installing a Child Seat TETHER ANCHOR Other LATCH-compatible seats have a flexible-type connector as shown above. 4. Whatever type you have, follow the child seat maker's instructions for adjusting or tightening the fit. Driver and Passenger Safety ANCHOR COVER Flexible-type 5. Remove the head restraint (see page 85). Make sure the removed head restraints are secured in the cargo area, and reinstalled when the child seat is removed. 7. Slide the anchor cover open. 6.
Main Menu Table Of Contents Installing a Child Seat TETHER ANCHOR TETHER STRAP HOOK Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt. In addition, the lap/shoulder belts in all seating positions except the driver's have a lockable retractor that must be activated to secure a child seat. 8.
Main Menu Table Of Contents Installing a Child Seat 3. After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps. 4. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
Main Menu Table Of Contents Installing a Child Seat Installing a Child Seat with a Tether TETHER ANCHOR TETHER STRAP HOOK TETHER ANCHORAGE POINTS ANCHOR COVER A child seat with a tether can be installed in either back seat, using one of the anchor points shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. 1.
Main Menu Table Of Contents Protecting Larger Children Allowing a child age 12 or under to sit in front can result in injury or death if the passenger's front airbag inflates. If a child must ride in front, move the vehicle seat as far back as possible, use a booster seat if needed, have the child sit up properly and wear the seat belt properly. Checking Seat Belt Fit 3. Does the shoulder belt cross between the child's neck and arm? 4.
Main Menu Table Of Contents Protecting Larger Children Using a Booster Seat Booster seats can be high-back or low-back. Whichever style you select, make sure the booster meets federal safety standards and that you follow the booster seat maker's instructions. If a child who uses a booster seat must ride in front, move the vehicle seat as far back as possible and be sure the child is wearing the seat belt properly.
Main Menu Table Of Contents Protecting Larger Children If you decide that a child can safely ride up front, be sure to: ● Maturity To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride. ● ● Physical Size Physically, a child must be large enough for the lap/shoulder belt to properly fit (see pages 14 and 49).
Main Menu Table Of Contents Carbon Monoxide Hazard Your vehicle's exhaust contains carbon monoxide gas. Carbon monoxide should not enter the vehicle in normal driving if you maintain your vehicle properly and follow the information on this page. Have the exhaust system inspected for leaks whenever: ● ● ● The vehicle is raised for an oil change. You notice a change in the sound of the exhaust. The vehicle was in an accident that may have damaged the underside. Carbon monoxide gas is toxic.
Main Menu Table Of Contents Safety Labels These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully. SUN VISOR DASHBOARD U.S. models only U.S. models Canadian models U.S. models only CONTINUED 53 2009 Element Driver and Passenger Safety If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement.
Main Menu Table Of Contents Safety Labels DOORJAMBS U.S. models HOOD U.S.
Main Menu Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Reclining the Front Seats .......... 87 Folding the Rear Seats .............. 88 Removing the Rear Seats .......... 90 Power Windows ............................ 92 Mirrors ......................................... 93 Adjusting the Power Mirrors..... 93 Rear Windows ...............................
Main Menu Table Of Contents Control Locations INSTRUMENT PANEL (P. 57) GAUGES (P. 64) POWER DOOR LOCK SWITCH (P. 80) AUDIO SYSTEM (P. 109) MIRROR CONTROLS (P. 93) HEATING/COOLING CONTROLS (P. 104) POWER WINDOW SWITCHES (P. 92) VEHICLE STABILITY ASSIST (VSA) OFF SWITCH (P. 231) USB ADAPTER CABLEꭧ (P. 164, 177) HOOD RELEASE HANDLE (P. 200) A/T model with navigation system is shown. AUTOMATIC TRANSMISSION (P. 219) MANUAL TRANSMISSION (P. 217) ꭧ: If equipped 56 2009 Element PARKING BRAKE (P.
Main Menu Table Of Contents Instrument Panel DAYTIME RUNNING LIGHTS INDICATOR (P. 60) CRUISE MAIN INDICATOR CRUISE CONTROL (P. 60) INDICATOR (P. 60) MALFUNCTION INDICATOR LAMP (P. 58, 296) LIGHTS ON INDICATOR (P. 61) MAINTENANCE MINDER INDICATOR (P. 59) CHARGING SYSTEM INDICATOR (P. 58, 295) VSA OFF INDICATOR (P. 62) LOW TIRE PRESSURE INDICATOR (P. 62) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR (P. 59) Instruments and Controls SEAT BELT REMINDER INDICATOR (P. 58) HIGH BEAM INDICATOR (P.
Main Menu Table Of Contents Instrument Panel Indicators The instrument panel has many indicators that give you important information about your vehicle. Malfunction Indicator Lamp For more information, see page 296. Low Oil Pressure Indicator The engine can be severely damaged if this indicator flashes or stays on when the engine is running. For more information, see page 295. Charging System Indicator If this indicator comes on when the engine is running, the battery is not being charged.
Main Menu Table Of Contents Instrument Panel Indicators If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page 18. This indicator comes on briefly when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates a potential problem with your front airbags.
Main Menu Table Of Contents Instrument Panel Indicators Immobilizer System Indicator This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will then go off if you have inserted a properly coded ignition key. If it is not a properly coded key, the indicator will blink, and the engine will not start (see page 76). This indicator also blinks several times when you turn the ignition switch from the ON (II) position to the ACCESSORY (I) or LOCK (0) position.
Main Menu Table Of Contents Instrument Panel Indicators Lights On Indicator Canadian models only This indicator comes on when the washer fluid level is low. Add washer fluid when you see this indicator come on (see page 255). When the indicator comes on, there is about 2.8 U.S. gal (10.5 L) of fuel remaining in the tank before the needle reaches E. There is a small reserve of fuel remaining in the tank when the needle does reach E.
Main Menu Table Of Contents Instrument Panel Indicators Vehicle Stability Assist (VSA) System Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position and when the ignition switch is turned to the START (III) position. It flashes when VSA is active (see page 230). If it comes on and stays on at any other time, or it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the VSA system.
Main Menu Table Of Contents Instrument Panel Indicators Tire Pressure Monitoring System (TPMS) Indicator Instruments and Controls This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If this indicator comes on and stays on at any other time, or if it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the TPMS; the system that monitors tire pressure.
Main Menu Table Of Contents Gauges SPEEDOMETER TACHOMETER FUEL GAUGE DRL SELECT/RESET KNOB INFORMATION DISPLAY TEMPERATURE GAUGE U.S. model is shown. ODOMETER/TRIP METER/ CHECK FUEL CAP MESSAGE OUTSIDE TEMPERATURE INDICATORꭧ ꭧ: If equipped.
Main Menu Table Of Contents Gauges TRIP METER A ENGINE OIL LIFE TRIP METER B OUTSIDE TEMPERATURE INDICATOR U.S. model with outside temperature indicator is shown. Information Display The information display shows the odometer, trip meter, engine oil life, outside temperature (if equipped), and maintenance item code(s). To switch the display, press and release the select/reset knob repeatedly. When you turn the ignition switch to the ON (II) position, your last selection is displayed.
Main Menu Table Of Contents Gauges Trip Meter This shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Switch between these displays by pressing the select/reset knob repeatedly. Each trip meter works independently, so you can keep track of two different distances. When you turn the ignition switch to the ON (II) position, the last selection is displayed. Fuel Gauge This shows how much fuel you have.
Main Menu Table Of Contents Gauges Temperature Gauge This shows the temperature of the engine's coolant. During normal operation, the pointer should rise to about the middle of the gauge. In severe driving conditions, the pointer may rise to the upper zone. If it reaches the red (hot) mark, pull safely to the side of the road. Turn to page 293 for instructions and precautions on checking the engine's cooling system.
Main Menu Table Of Contents Gauges Outside Temperature Indicator On EX and SC models This indicator displays the outside temperature in Fahrenheit (U.S. models) or Celsius (Canadian models). The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your vehicle speed is under 19 mph (30 km/h).
Main Menu Table Of Contents Controls Near the Steering Wheel HEADLIGHTS/TURN SIGNALS (P. 71) WINDSHIELD WIPERS/WASHERS (P. 70) ACCESSORY POWER SOCKET (P.100) REMOTE AUDIO CONTROLSꭧ2 (P. 191) VSA OFF SWITCH (P. 231) HORNꭧ1 STEERING WHEEL ADJUSTMENT (P. 74) A/T model with navigation system is shown. Instruments and Controls NAVIGATION SYSTEM VOICE CONTROL BUTTONSꭧ3 MANUAL TRANSMISSION (P.217) AUTOMATIC TRANSMISSION (P.219) REAR WINDOW DEFOGGER BUTTON (P. 74) HAZARD WARNING BUTTON (P.
Main Menu Table Of Contents Windshield Wipers and Washers Push the right lever up or down to select a position. Windshield Wiper Rear Window Wiper and Washer MIST - The wipers run at high speed until you release the lever. ADJUSTMENT RING 1. MIST 2. OFF 3. INT - Intermittent 3. LO - Low speed 5. HI - High speed 6. Windshield washers OFF - The wipers are not activated. INT - The length of the wipe interval is varied automatically according to vehicle's speed.
Main Menu Table Of Contents Turn Signals and Headlights Headlights - Turning the switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the ‘‘ ’’ position turns on the headlights. When the light switch is in the ‘‘ ’’ or ‘‘ ’’ position, the lights on indicator comes on as a reminder.
Main Menu Table Of Contents Turn Signals and Headlights, Instrument Panel Brightness High Beams - Push the lever back until you hear a click to turn on the high beams. The blue high beam indicator will come on (see page 61). Pull the lever back again to low beams. To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back.
Main Menu Table Of Contents Instrument Panel Brightness, Hazard Warning Button BRIGHTNESS LEVEL The level of brightness is shown on the information display while you adjust it. It goes out about 5 seconds after you finish adjusting. To reduce glare at night, the instrument panel illumination dims when you turn the light switch to or . Turning the select/reset knob to the right until you hear a beep will cancel the reduced brightness.
Main Menu Table Of Contents Rear Window Defogger, Steering Wheel Adjustment Rear Window Defogger Make sure the rear window is clear and you have good visibility before starting to drive. The defogger wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe side-to-side. Steering Wheel Adjustment Make any steering wheel adjustment before you start driving.
Main Menu Table Of Contents Steering Wheel Adjustment, Keys and Locks 3. Push the lever up to lock the steering wheel in that position. To adjust the steering wheel upward or downward: KEY NUMBER TAG MASTER KEYS (BLACK) VALET KEY (LIGHT GRAY) The master key fits all the locks on your vehicle. The valet key works only in the ignition and the door locks. You can keep the glove box and hatch locked when you leave your vehicle and the valet key at a parking facility. 1.
Main Menu Table Of Contents Keys and Locks, Immobilizer System You should have received a key number tag with your set of keys. You will need this key number if you ever have to get a key replaced. Use only Honda-approved key blanks. These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged. ● ● ● Protect the keys from direct sunlight, high temperature, and high humidity.
Main Menu Table Of Contents Immobilizer System, Remote Transmitter If the system repeatedly does not recognize the coding of your key, contact your dealer. If you have lost your key and cannot start the engine, contact your dealer. Always take the ignition key with you whenever you leave the vehicle alone. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Main Menu Table Of Contents Remote Transmitter UNLOCK - Press this button once to unlock the driver's door. Push it twice to unlock the passenger's door and the hatch. Some exterior lights will flash twice each time you press the button. If you do not open either door or the hatch within 30 seconds, they will automatically relock. PANIC - Press this button for about 1 second to attract attention; the horn will sound and the exterior lights will flash for about 30 seconds.
Main Menu Table Of Contents Remote Transmitter, Ignition Switch As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Main Menu Table Of Contents Ignition Switch, Door Locks If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key. You will hear a reminder beeper if you leave the key in the LOCK (0) or the ACCESSORY (I) position and open the driver's door. Remove the key to turn off the beeper. ACCESSORY (I) - You can operate the audio system and the accessory power sockets in this position.
Main Menu Table Of Contents Door Locks The lock tab on the passenger's door locks and unlocks only that door. Pulling up on the driver's door lock tab only unlocks the driver's door. Rear Doors Hatch To lock the driver's door, remove the key from the ignition switch, push the lock tab down or push the door lock switch down, then close the door. Instruments and Controls Unlock Lock To unlock the driver's door from the outside, turn the key and release it.
Main Menu Table Of Contents Door Locks ● ● Lock the hatch by pushing down the lock tab on the driver's door (see page 80), or by using the master key in the driver's door lock. Tailgate Lock or unlock the hatch with the master door lock switch. With the hatch unlocked, open it by pulling the handle and lifting up. To close the hatch, lower it, then press down on the back edge. When both the hatch and tailgate are open, the hatch cannot be latched without first closing the tailgate.
Main Menu Table Of Contents Door Locks, Seats Seat Adjustments Front Seat See pages 11- 13 for important safety information and warnings about how to properly position seats and seat-backs. Make all seat adjustments before you start driving. To adjust the seat forward and backward, pull up on the bar under the seat cushion's front edge. Try to move the seat to make sure it is locked in position. CONTINUED 83 2009 Element Instruments and Controls See page 210 for information on cargo loading.
Main Menu Table Of Contents Seats Rear Seat Driver's Seat Height Adjustment SEAT-BACK ADJUSTMENT STRAP To change the seat-back angle of the front seat, pull up on the lever on the outside of the seat bottom. Adjust the seat-back and make sure it locks into position. To change the angle of the rear seatback, pull the strap at the inside edge of the seat cushion, make sure the seat-back locks into position.
Main Menu Table Of Contents Seats Front Seat Armrests Head Restraints On EX model See page 13 for important safety information and a warning about improperly positioning head restraints. They are most effective when you adjust them so the center of the back of the occupant's head rests against the center of the restraint. Each front seat has an armrest on the side of the seat-back. To use it, pivot it down.
Main Menu Table Of Contents Seats Adjusting the Head Restraint Front Removing the Head Restraint Rear CUSHION Failure to reinstall the head restraints can result in severe injury during a crash. Always replace the head restraints before driving. RELEASE BUTTON RELEASE BUTTON The head restraints in the front and rear seating positions adjust for height. You need both hands to adjust the restraint. To raise it, pull upward.
Main Menu Table Of Contents Seats 3. Move the front seat backward until it touches the rear seat. 4. Adjust the rear seat-back to the desired position. You can recline the seat-backs on the front seats so they are level with the rear seat cushions, making a large cushioned area. To do this: 1. Remove the head restraints from the front seats (see page 85), and store them in the side pockets of the cargo area. Reverse this procedure to return the front and rear seats to the upright position.
Main Menu Table Of Contents Seats Folding the Rear Seats To create more cargo space, you can fold up each rear seat to each side wall separately. SEAT-BACK ADJUSTMENT STRAP RELEASE STRAP 1. Lower the head restraint to its lowest position. 2. Pull the seat-back adjustment strap at the inside edge of the seat cushion and push the seat-back backward as far as it will go. 88 2009 Element 3. Pull the release strap on the seat support, and pivot the seat toward the vehicle's side wall.
Main Menu Table Of Contents Seats GRAB RAIL SEAT SUPPORT FASTENING STRAP 4. A fastening strap is attached to the inside of the seat cushion. While pushing the seat up and toward the side wall, hook the fastening strap to the grab rail. 5. Fold down the seat support. 89 2009 Element Instruments and Controls Reverse this procedure to return the rear seat to the upright position. When not in use, store the fastening strap hook in the fabric pocket on the bottom of the seat cushion.
Main Menu Table Of Contents Seats Removing the Rear Seats TAB LOCK LEVER STEEL HANDLE COVER RELEASE STRAP Both seats can be removed to give more cargo capacity. To remove a seat: 2. Remove the cover between the seat cushion and the side wall by pulling the tab and pulling the cover straight up. 1. Pull the release strap on the seat support to unlock the seat support. 90 2009 Element 3. Push the lock lever forward to unlock the seat and fold down the seat support.
Main Menu Table Of Contents Seats Reverse this procedure to reinstall the seat. Make sure the seats are securely locked in place before driving. STEEL HANDLE Instruments and Controls Always remove an unsecured seat from the vehicle before driving. A seat that is not locked in place could be thrown about and cause injury in a sudden stop or crash. HANDLE STRAP 4.
Main Menu Table Of Contents Power Windows DRIVER'S WINDOW SWITCH Closing a power window on someone's hands or fingers can cause serious injury. Make sure your passengers are away from the window before closing them. MAIN SWITCH Turn the ignition switch to the ON (II) position to raise or lower either window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.
Main Menu Table Of Contents Mirrors Adjusting the Power Mirrors TAB SELECTOR SWITCH 3. Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down. Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position.
Main Menu Table Of Contents Rear Windows, Parking Brake Rear Windows Parking Brake PARKING BRAKE LEVER To open a rear window, pull the lever towards you, then push it out until it locks. To close the rear window pull the lever towards you, then push it back. Make sure the window is fully closed and locked. To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever.
Main Menu Table Of Contents Interior Lights Light Control Switch On EX and SC models When the switch is in the door activated position: The individual map lights come on when any door is opened, or when the remote transmitter is used to unlock the doors (see page 77). When the doors are closed, each light can be turned on and off by pushing the lens. Individual Map Lights On EX and SC models ● DOOR ACTIVATED POSITION OFF ON The light control switch has three positions: OFF, Door Activated, and ON.
Main Menu Table Of Contents Interior Lights Courtesy Light On vehicles with navigation system Ceiling Light Cargo Area Light The cargo area light has a threeposition switch. In the center position, the light comes on when you open the hatch. ON OFF DOOR ACTIVATED COURTESY LIGHT The courtesy light between the map lights comes on when you turn the parking lights on. To adjust its brightness, turn the select/reset knob on the instrument panel (see page 72).
Main Menu Table Of Contents Interior Convenience Items CARGO AREA CARGO AREA SIDE POCKET COIN TRAY OVERHEAD CONSOLEꭧ DOOR POCKETS VANITY MIRRORSꭧ Instruments and Controls BEVERAGE HOLDERS ACCESSORY POWER SOCKET GLOVE BOX CENTER LOWER POCKETꭧ SEAT-BACK POCKETꭧ BEVERAGE HOLDERS LX model EX model SC model ACCESSORY POWER SOCKET ꭧ: If equipped.
Main Menu Table Of Contents Interior Convenience Items Cooler Box On EX model To reinstall the lid, vertically set the rear lid hinge to the pins on the box and push down. The lid must be vertical as shown in the illustration. TAB To remove the cooler box, rotate the handle up to the unlocked position. There is a cooler box between the driver's and passenger's seats. Slide the console towards the rear of the vehicle then lift the console.
Main Menu Table Of Contents Interior Convenience Items NOTE: The cooler box must be locked to floor base while driving. To reinstall the cooler box, set the cooler box into the floor base, then slide the cooler box forward. Rotate the handle down to the locked position. Make sure the cooler box is securely locked in place. A cooler box that is not locked in place could become a projectile and cause injury in a sudden stop or crash. SC model is shown. The front beverage holder is removable.
Main Menu Table Of Contents Interior Convenience Items Accessory Power Sockets Your vehicle has one, two, or three accessory power sockets, depending on the model. All models have a front accessory power socket on the dashboard above the glove box. EX and SC models have an accessory power socket in the cargo area on the passenger's side. The SC model has one additional socket in the center console.
Main Menu Table Of Contents Interior Convenience Items Vanity Mirror Overhead Console On EX and SC models On EX and SC models Slide Push To use the vanity mirror on the back of the sun visor, pull up the cover. To open the overhead console, push on the rear edge or slide the tab as shown in the illustration. It will unlatch and swing down. To close it, push it until it latches. Make sure the holder is closed while you are driving.
Main Menu Table Of Contents 102 2009 Element
Main Menu Features The heating and air conditioning system in your vehicle provides a comfortable driving environment in all weather conditions. On EX and SC models Your vehicle has an anti-theft audio system that requires a code number to enable it. Vents, Heating, and A/C .............. Air Flow Controls..................... Ventilation ............................... Using the Heater ..................... Using the A/C ......................... Dehumidify the Interior ...........
Main Menu Table Of Contents Vents, Heating, and A/C FAN CONTROL DIAL TEMPERATURE CONTROL DIAL MODE CONTROL DIAL DEFROST POSITION RECIRCULATION BUTTON A/C (AIR CONDITIONING) BUTTON REAR WINDOW DEFOGGER BUTTON MAX A/C POSITION 104 2009 Element
Main Menu Table Of Contents Vents, Heating, and A/C The outside air intakes for the heating and cooling system are at the base of the windshield. Keep this area clear of leaves and other debris. Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. The system should be left in fresh air mode under almost all conditions. Keeping the system in recirculation mode, particularly with the A/C off, can cause the windows to fog up.
Main Menu Table Of Contents Vents, Heating, and A/C Air flows from the defroster vents at the base of the windshield. or , the When you select system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then discharges it through vents near the tailgate. 1. Set the temperature to the lower limit. 2. Make sure the A/C is off. 3. Select and fresh air mode.
Main Menu Table Of Contents Vents, Heating, and A/C Dehumidify the Interior Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry and can prevent the windows from fogging up. 2. Turn on the air conditioning. 3. Select and fresh air mode. 4. Adjust the temperature to your preference. This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C). 1.
Main Menu Table Of Contents Vents, Heating, and A/C To Remove Exterior Frost or Ice From the Windows 1. Select . The system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on if the A/C was off to start with. 2. Select . 3. Set the fan and temperature controls to maximum level. To Turn Everything Off Turning the fan speed control dial all the way to the left shuts the system off. ● ● Keep the system off for short periods only.
Main Menu Table Of Contents Audio System An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle's audio system. LX model EX and SC models For vehicles without navigation system, see pages 110 through 126. Features For vehicles with navigation system, see pages 127 through 182. U.S.
Main Menu Table Of Contents Playing the FM/AM Radio (Models without navigation system) EX and SC models LX model VOL/PWR KNOB AM/FM BUTTON STEREO INDICATOR SCAN BUTTON AM/FM BUTTON STEREO INDICATOR SCAN INDICATOR SEEK/SKIP BAR VOL/PWR KNOB PRESET BUTTONS A.SEL BUTTON SEEK/SKIP BUTTON A.
Main Menu Table Of Contents Playing the FM/AM Radio (Models without navigation system) To Play the Radio The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the VOL/PWR knob or the AM/FM button. Adjust the volume by turning the same knob. To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select. TUNE - Use the TUNE knob to tune the radio to a desired frequency.
Main Menu Table Of Contents Playing the FM/AM Radio (Models without navigation system) AUTO SELECT - If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button. ‘‘A. SEL’’ flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM stations in the preset buttons.
Main Menu Table Of Contents Playing the XM® Radio (Models without navigation system) XM® Radio On EX and SC models Your vehicle is capable of receiving XM® Radio anywhere in the United States, and Canada except Hawaii and Alaska. CATEGORY INDICATOR VOL/PWR KNOB XM BUTTON DISP/MODE BUTTON Features XM is a registered trademark of XM Satellite Radio®, Inc.
Main Menu Table Of Contents Playing the XM Radio (Models without navigation system) ® XM Radio receives signals from two satellites to produce clear, highquality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display. Operating the XM Radio To listen to the XM Radio, turn the ignition switch to the ACCESSORY (I) or ON (II) position.
Main Menu Table Of Contents Playing the XM® Radio (Models without navigation system) Preset - You can store up to 12 preset channels using the six preset buttons. Each button stores one channel from the XM1 band and one channel from the XM2 band. To store a channel: 1. Press the XM button. Either XM1 or XM2 will show in the display. 5. Press the XM button again. The other XM band will show. Store the next six channels using steps 2 and 3.
Main Menu Table Of Contents Playing the XM Radio (Models without navigation system) ® XM Radio Display Messages ‘‘LOADING’’ - XM is loading the audio or program information. ‘‘OFF AIR’’ - The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ - The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally. ‘‘NO SIGNAL’’ - The signal is currently too weak.
Main Menu Table Of Contents Playing the XM® Radio (Models without navigation system) Signal may be blocked by mountains or large obstacles to the south. The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Signal weaker in these areas.
Main Menu Table Of Contents Playing the XM Radio (Models without navigation system) ® Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● ● ● ● ● ● ● Driving on the north side of an east/west mountain road. Driving on the north side of a large commercial truck on an east/west road. Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you.
Main Menu Table Of Contents Playing a Disc (Models without navigation system) LX model EX and SC models EJECT BUTTON CD/TAPE BUTTON EJECT BUTTON REPEAT INDICATOR VOL/PWR KNOB RPT (REPEAT) BUTTON Features CD SLOT CD/AUX BUTTON FOLDER INDICATOR CD SLOT RANDOM INDICATOR DISC INDICATOR RANDOM INDICATOR VOL/PWR KNOB SEEK/SKIP BAR RANDOM BUTTON SCAN BUTTON RPT (REPEAT) BUTTON SEEK/SKIP BUTTONS FOLDER KNOB DISPLAY BUTTON RDM (RANDOM) BUTTON CONTINUED 119 2009 Element
Main Menu Table Of Contents Playing a Disc (Models without navigation system) To Play a Disc To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. You operate the disc player with the same controls used for the radio. To select the disc player, press the CD/ TAPE or the CD/AUX button. You will see ‘‘CD’’ in the display.
Main Menu Table Of Contents Playing a Disc (Models without navigation system) Insert the disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. When the system reaches the end of the disc, it will return to the beginning and play the disc again. On EX and SC models If you press the DISP/MODE button while playing a disc, additional information (track, album, artist, etc.) may be displayed.
Main Menu Table Of Contents Playing a Disc (Models without navigation system) REPEAT (TRACK/FILE REPEAT) - To continuously replay a track (files in MP3/WMA mode), press and release the RPT button. You will see RPT in the display. Press the RPT button again to turn it off. On EX and SC models In MP3/WMA mode FOLDER SELECTION - To select a different folder, use the FOLDER knob to move to the beginning of the next folder. Turn the knob right to move to the beginning of the current folder.
Main Menu Table Of Contents Playing a Disc (Models without navigation system) On EX and SC models Pressing either side of the SEEK/ SKIP button also turns off scan. On EX and SC models In MP3/WMA mode FOLDER SCAN - This feature, when activated, samples all files on the selected folder in order. To activate folder scan, press and hold the SCAN button until you hear a beep. You will see SCAN in the display. The system will then play the first file for about 10 seconds.
Main Menu Table Of Contents Playing a Disc (Models without navigation system) Audio System Malfunction See pages 125 and 126 for information on error messages. Protecting Discs For information on how to handle and protect discs, see page 183. Operating the Optional Disc Changer On LX model An optional six disc changer is available for your vehicle. This disc changer uses the same controls used for the in-dash disc player or the radio.
Main Menu Table Of Contents Disc Player Error Messages (Models without navigation system) The chart on the right explains the error messages you may see in the display while playing a disc. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc.
Main Menu Table Of Contents Disc Changer Error Messages (Models without navigation system) If you see an error message in the display while playing a disc, find the cause in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message DISC Cause FOCUS error NO No disc in the magazine ERR Mechanical error HOT EJEC High temperature No magazine in the changer 126 2009 Element Solution Press the EJECT button, and pull out the disc.
Main Menu Table Of Contents Playing the FM/AM Radio (Models with navigation system) Playing the FM/AM Radio FM1 ICON FM2 ICON AM ICON Features Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the navigation section in your Quick Start Guide for an overview of this system, and the Navigation System Manual for complete details.
Main Menu Table Of Contents Playing the FM/AM Radio (Models with navigation system) To Play the FM/AM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob. Pushing the AUDIO button will also turn on the system. You can also operate the audio system without using the control icons on the audio screen. Use the control buttons on the left side of the screen.
Main Menu Table Of Contents Playing the FM/AM Radio (Models with navigation system) If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again. Preset - Each preset button can store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. FM1 and FM2 let you store six stations each. 2. Use the tune, seek, or scan function to tune the radio to a desired station.
Main Menu Table Of Contents Playing the FM/AM Radio (Models with navigation system) You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button. Adjusting the Sound SPEAKER SETTING If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described. To turn off auto select, press the AUTO SEL icon. This restores the presets you originally set.
Main Menu Table Of Contents Playing the FM/AM Radio (Models with navigation system) BALANCE - Adjusts the side-toside strength of the sound. To adjust the left/right balance, touch the L or R icon. The right upper display shows you the current setting of the sound strength coming from each speaker. SVC (speed-sensitive volume compensation) - The SVC mode controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases.
Main Menu Table Of Contents Playing the XM Radio (Models with navigation system) ® XM RADIO ICON MODE ICON JOYSTICK POWER/VOLUME KNOB CHANNEL INDICATOR AM/FM BUTTON CD/XM (XM RADIO) BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR PRESET BUTTONS 132 2009 Element
Main Menu Table Of Contents Playing the XM® Radio (Models with navigation system) Your audio system is capable of receiving XM® Radio anywhere in the United States, and Canada, except Hawaii and Alaska. XM® is a registered trademark of XM Satellite Radio®, Inc. When you press and hold the AUDIO button, the display also shows all XM information. You can also change to the XM Radio while you are listening to an FM station, AM station, disc, pc card, etc.
Main Menu Table Of Contents Playing the XM Radio (Models with navigation system) ® On the audio display, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title). You may experience periods when XM Radio does not transmit the artist's name and song title information. If this happens, there is nothing wrong with your system. TUNE - Press the TUNE bar to change channel selections. Press for higher numbered channels and for lower numbered channels.
Main Menu Table Of Contents Playing the XM® Radio (Models with navigation system) 4. Repeat steps 2 and 3 to store the first six channels. To Select a Channel from List Once a channel is stored, press and release the proper preset button (icon) to tune to it. Each preset button's channel is shown on the bottom of the audio display. Features 5. Press the XM button again or touch the other XM icon (XM1 or XM2) on the audio display. Store the next six channels using steps 2 and 3.
Main Menu Table Of Contents Playing the XM Radio (Models with navigation system) ® To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. XM Radio Display Messages ‘‘LOADING’’ - XM is loading the audio or program information. ‘‘OFF AIR’’ - The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ - The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.
Main Menu Table Of Contents Playing the XM® Radio (Models with navigation system) Signal may be blocked by mountains or large obstacles to the south. Signal weaker in these areas. The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas.
Main Menu Table Of Contents Playing the XM Radio (Models with navigation system) ® Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● ● ● ● ● ● ● Driving on the north side of an east/west mountain road. Driving on the north side of a large commercial truck on an east/west road. Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you.
Main Menu Table Of Contents Playing the XM® Radio (Models with navigation system) Features While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, you'll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM Radio.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) CD ICON JOYSTICK POWER/VOLUME KNOB OPEN BUTTON CD/XM BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR RDM (RANDOM) BUTTON RPT (REPEAT) BUTTON FAST FORWARD BUTTON REWIND BUTTON 140 2009 Element SKIP ꬽ BUTTON SKIP ꭚ BUTTON
Main Menu Table Of Contents Playing a Disc (Models with navigation system) To Play a Disc You operate the disc player with the same controls used for the radio. To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. If you have a disc that is a combination of CD-DA tracks and MP3/WMA files, you can choose the format to listen by pressing and holding CD/XM button until you hear a beep. Do not use discs with adhesive labels.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) To Load a Disc DISC SLOT CLOSE BUTTON OPEN BUTTON The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears. Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) Push the AUDIO button beside the screen to show the audio display and operate the disc player. When playing a CD recorded with text data, the track, album, and artist name are shown on the audio display. When playing a disc in MP3 or WMA, the folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) In MP3 or WMA mode FOLDER SELECTION - To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the previous folder. TRACK REPEAT (FILE REPEAT) - To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1).
Main Menu Table Of Contents Playing a Disc (Models with navigation system) Pressing either SKIP button (preset 5 or 6) also turns off scan. In MP3 or WMA mode FOLDER SCAN - This feature, when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display. The system plays the first file in each folder for about 10 seconds.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) FOLDER ICON FOLDER LIST FOLDER ICON TRACK/FILE LIST To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. RETURN ICON Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.
Main Menu Table Of Contents Playing a Disc (Models with navigation system) To play an audio unit connected to the auxiliary input jack or the USB adapter cable when a disc is playing, touch the AUX icon. If you turn the system off while a disc is playing, either with the power/ volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.
Main Menu Table Of Contents Disc Player Error Messages (Models with navigation system) The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page 184.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) TRACK LIST ICON PC CARD ICON JOYSTICK POWER/VOLUME KNOB Features PLAY MODE ICON OPEN BUTTON CD/XM BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR RDM (RANDOM) BUTTON RPT (REPEAT) BUTTON FAST FORWARD BUTTON REWIND BUTTON SKIP ꬽ BUTTON SKIP ꭚ BUTTON CONTINUED 149 2009 Element
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) To Play a PC Card You operate the PC card player with the same controls used for the radio and the disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position. The PC card player reads and plays cards in MP3 or WMA formats. Depending on the format, the screen will indicate ‘‘MP3’’ or ‘‘WMA’’ when a card is playing. The card limit of the player is 99 folders and 999 tracks.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file. Loading a PC Card PC CARD SLOT Insert a PC card straight into the slot. The drive will read the PC card and begin to play it. Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue. ● ● ● To Select a Play Mode FOLDER MODE PLAY MODE ICON MODE INDICATOR Folder mode plays tracks in the order they were added to the card. Artist mode plays tracks in alphabetical order, by artist and song title.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) PLAY MODE ICON Features To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display. Select the desired mode by touching the appropriate icon, or move the joystick, then press the ENT. After you select the play mode, the display changes to the selectable playing menu.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) If you select ‘‘Play a new track list,’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list. To Change or Select Tracks/Files PRESET BUTTON'S FUNCTION To go back to the previous screen, press the CANCEL button on the right side of the screen. To exit the play mode screens, press the AUDIO button.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) TRACK REPEAT (FILE REPEAT) - To continuously replay a file, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off. FOLDER/ARTIST/ALBUM RANDOM - This feature, when activated, plays all files in each folder/artist/album in random order, rather than in the order they are recorded or listed.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) FOLDER/ARTIST/ALBUM SCAN - This feature, when activated, samples the first file in each folder/ artist/album on the PC card in order. To activate each scan feature, press and hold the SCAN button until you hear a beep. You will see FOLDER SCAN, ARTIST SCAN or ALBUM SCAN in the display. The system plays the first file in the folder for about 10 seconds.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) ARTIST NAME ALBUM NAME Features To select a folder, touch its icon on the screen. The display changes to the file list, then select a file. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue. In artist mode, the artist name is also displayed on the right side of each selectable icon. Select the desired file.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) To go back to the normal playing display, press the AUDIO button. Pressing the CANCEL button goes back to the previous screen and pressing the MAP button cancels the audio mode display. Song Search Function TITLE BY KEYWORD ICON SONG SEARCH ICON ARTIST ICON Folder mode is shown. RETURN ICON When you select ‘‘Song Search’’ from the track list display, the song search menu appears.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) Searching for a Song Title by Keyword MORE ICON To cancel the selected letter, select the letter and touch the Delete icon. To select more characters, touch the More icon. The other character list will be shown. Searching for a Song by Artist Name ARTIST LIST FILE LIST Features DELETE ICON LIST ICON In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen.
Main Menu Table Of Contents Playing a PC Card (Models with navigation system) Searching for a Song by Album Name ALBUM LIST Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list. To Stop Playing a PC Card To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon.
Main Menu Table Of Contents PC Card Error Messages (Models with navigation system) If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Solution FILE ERROR The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged NO MUSIC It appears when the PC card is empty or there are no MP3 or WMA files in the PC card.
Main Menu Table Of Contents Playing an iPod (Models with navigation system) ® USB ICON JOYSTICK POWER/VOLUME KNOB AUDIO CONTROL DISPLAY iPod INDICATOR MAP BUTTON CD/XM BUTTON AUDIO BUTTON CANCEL BUTTON RDM (RANDOM) BUTTON RPT (REPEAT) BUTTON FAST FORWARD BUTTON REWIND BUTTON 162 2009 Element SKIP ꬽ BUTTON SKIP ꭚ BUTTON
Main Menu Table Of Contents Playing an iPod® (Models with navigation system) To select the USB mode without using the icon, press the CD/XM button repeatedly. The status bar appears on the bottom of the screen. The audio system reads and plays sound files to be playable on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes. iPod and iTunes are registered trademarks owned by Apple Inc.
Main Menu Table Of Contents Playing an iPod (Models with navigation system) ® NOTE: ● ● ● ● Do not connect your iPod using a HUB. Connecting an iPod CABLE USB CONNECTOR USB ADAPTER CABLE Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it. Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector. We recommend backing up your data before playing it.
Main Menu Table Of Contents Playing an iPod® (Models with navigation system) Sample Display When the iPod is connected and the USB mode is selected on the audio display, ‘‘USB LOAD’’ is shown for a few seconds, then the iPod indicator is shown on the display. On the navigation map display, the ‘‘USB CONNECTED’’ message will be displayed for a few seconds in the lower part of the screen. After loading, you will see Honda logoꭧ on the iPod.
Main Menu Table Of Contents Playing an iPod (Models with navigation system) ® To Change or Select Files FF/REW - To move rapidly within a file, press and hold (preset 4) or (preset 3). AUDIO INFO ICON On the map screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower part of the screen. SKIP - Each time you press and release (preset 6), the player skips forward to the beginning of the next file.
Main Menu Table Of Contents Playing an iPod® (Models with navigation system) Using a Track List To Select a File from iPod Menu AUDIO DISPLAY Features You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display. To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon.
Main Menu Table Of Contents Playing an iPod (Models with navigation system) ® To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. If you select ‘‘ALL’’ on either the artists or albums list, all available files on the selected list are played. Select a desired list by touching the appropriate icon. The display shows the items on that list. Touch a desired file. To scroll through the display, touch the or icon on the side of the screen.
Main Menu Table Of Contents Playing an iPod® (Models with navigation system) To Select Repeat or Random Mode: You can select any type of repeat and random modes with the RPT and RDM buttons. To confirm the selected mode, press the AUDIO button to show the audio display on the navigation screen. Features TRACK REPEAT - This feature continuously plays a track/file. To activate track repeat, press and release the RPT button (preset 1). You will see REPEAT in the display.
Main Menu Table Of Contents Playing an iPod (Models with navigation system) ® ALBUM RANDOM - This feature plays all available albums from the selected item in the iPod menu list (playlists, artists, albums or songs) in random order. The tracks/files in each album are played in the recorded order. To activate album random, press and release the RDM button (preset 2) repeatedly until you see ALBUM RANDOM on the screen. Press and hold the button until you hear a beep to turn off either random mode.
Main Menu Table Of Contents Playing an iPod® (Models with navigation system) iPod Error Messages If you see an error message in the screen, see page 172.
Main Menu Table Of Contents iPod Error Messages (Models with navigation system) ® If you see an error message on the screen while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message UNSUPPORTED NO SONG Solution Appears when an unsupported iPod is inserted. There is no music information.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) USB ICON JOYSTICK POWER/VOLUME KNOB Features MP3 INDICATOR TRACK LIST ICON AUDIO BUTTON SCAN BUTTON SOUND ICON RDM (RANDOM) BUTTON RPT (REPEAT) BUTTON FAST FORWARD BUTTON REWIND BUTTON SKIP ꬽ BUTTON SKIP ꭚ BUTTON CONTINUED 173 2009 Element
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) To Play a USB Flash Memory Device This audio system can select and play the audio files from a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the glove box. The ignition switch must be in the ACCESSORY (I) or ON (II) position.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) NOTE: ● ● ● ● Do not connect your USB flash memory device using a HUB. Do not use an extension cable to the USB adapter cable equipped with your vehicle. Do not keep the USB flash memory device in the vehicle. Direct sunlight and high heat will damage it. ● Depending on the type and number of files, it may take some time before they begin to play.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) The specifications for compatible WMA files are: – Sampling frequency: 32/44.1/48 kHz – Bitrate: 48-320/VBR kbps (Max 384) – Supported standards: WMA version 7/8/9 – Partition: Top partition only – Maximum layers: 8 The specifications for compatible AAC files are: – Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) Connecting a USB Flash Memory Device CABLE USB CONNECTOR 1. Pull out the USB connector from the holder and remove the cable from the clip in the glove box. 2. Connect the USB flash memory device to the USB adapter cable correctly and securely. When the USB device is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon switches to the USB icon.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) To Change or Select Files SKIP - Each time you press and release (preset 6), the system skips forward to the beginning of the next file. Press and release (preset 5), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file. To Select a File from Folder and File Lists FF/REW - To move rapidly within a file, press and hold (preset 4) or (preset 3).
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) FOLDER LIST FOLDER ICON TRACK/FILE LIST To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder. The display changes to the file list. Then, select and touch a desired file.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) TRACK RANDOM - This feature plays all the tracks/files in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. To Select Repeat, Random or Scan Mode: You can select any type of repeat, random and scan modes with the RPT, RDM and SCAN buttons.
Main Menu Table Of Contents Playing a USB Flash Memory Device (Models with navigation system) FOLDER-SCAN - This feature samples the first track/file in each folder in the order they are stored. To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display. You will get a 10 second sampling of each first track/file in the folder(s).
Main Menu Table Of Contents USB Flash Memory Device Error Messages (Models with navigation system) If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message UNPLAYABLE FILE UNSUPPORTED NO SONG Solution The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility that the files have been damaged.
Main Menu Table Of Contents Protecting Your Discs General Information When using CD-R or CD-RW discs, use only high quality CDs labeled for audio use. ● ● ● Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems. Handle your discs properly to prevent damage and skipping. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. To clean a disc, use a clean soft cloth.
Main Menu Table Of Contents Protecting Your Discs Additional Information on Recommended Discs The disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated below, it may become stuck inside and damage the audio unit. Examples of these discs are shown to the right: 1. Bubbled, wrinkled, labeled, and excessively thick discs Bubbled/ Wrinkled With Label/ Sticker 2. Damaged discs Chipped/ Cracked Using Printer Label Kit Sealed With Plastic Ring 3.
Main Menu Table Of Contents Protecting Your Discs 4. Small, irregular shaped discs 5. Discs with scratches, dirty discs ● Recommended discs are printed with the following logo. Features 3-inch (8-cm) CD Triangle Shape Fingerprints, scratches, etc. ● ● ● CD-R or CD-RW may not play due to the recording conditions. Scratches and fingerprints on the discs may cause the sound to skip. ● Can Shape Audio unit may not play the following formats. This audio unit cannot play a Dualdisc®.
Main Menu Table Of Contents FM/AM Radio Reception Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
Main Menu Table Of Contents FM/AM Radio Reception As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Features Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station's transmitter, and the deflected signal. This causes the sound to distort or flutter.
Main Menu Table Of Contents Radio Theft Protection On EX and SC models Your vehicle's audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific code in the preset buttons (icon on vehicle's with navigation system). Because there are hundreds of number combinations possible from specific digits, making the system work without knowing the exact code is nearly impossible.
Main Menu Table Of Contents Setting the Clock On vehicles without navigation system If your vehicle's battery is disconnected or goes dead, you may need to set the clock. On EX and SC models TIME DISPLAY CLOCK BUTTON CLOCK BUTTON TIME DISPLAY On LX model H BUTTON Features To set the hour, press the H button while pressing the CLOCK (SCAN/ RPT) button until the hour advances to the desired time.
Main Menu Table Of Contents Setting the Clock You can quickly set the time to the nearest hour. If the displayed time is before the half hour, press the R (RESET) button to set the clock back to the previous hour. If the displayed time is after the half hour, pressing R sets the clock forward to the beginning of the next hour. On vehicles with navigation system The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS.
Main Menu Table Of Contents Remote Audio Controls On EX and SC models CH BUTTON The middle button adjusts the volume up ( ) or down ( ). Press the top or bottom of the button and hold it until the desired volume is reached, then release it. On vehicles with navigation system VOLUME BUTTON MODE BUTTON Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel.
Main Menu Table Of Contents Remote Audio Controls, Auxiliary Input Jack In MP3 or WMA mode, you can use the seek function to select folders. Press and hold the CH button until you hear a beep, to skip forward to the first file of the next folder. Auxiliary Input Jack On EX and SC models On vehicles with navigation system If you are playing a PC card, press the CH button to advance to the next file.
Main Menu Table Of Contents Cruise Control 2. Accelerate to the desired cruising speed above 25 mph (40 km/h). Using Cruise Control RES/ACCEL BUTTON 3. Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated. SET/DECEL BUTTON CANCEL BUTTON Improper use of the cruise control can lead to a crash. Use the cruise control only when traveling on open highways in good weather. CRUISE BUTTON 1.
Main Menu Table Of Contents Cruise Control Changing the Set Speed You can increase the set cruising speed in any of these ways: RES/ACCEL BUTTON SET/DECEL BUTTON ● CANCEL BUTTON Cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down. This will cancel cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on.
Main Menu Table Of Contents Cruise Control Resting your foot on the brake or clutch pedal causes the cruise control to cancel. Canceling Cruise Control RES/ACCEL BUTTON SET/DECEL BUTTON You can cancel cruise control in any of these ways: ● ● ● Pressing the CRUISE button turns the system completely off and erases the previous cruising speed. Tap the brake or clutch pedal. Push the CANCEL button on the steering wheel. Push the CRUISE button on the steering wheel.
Main Menu Table Of Contents Rearview Camera and Monitor On vehicles with navigation system When in reverse, the touch screen and navigation system ‘‘hard’’ buttons are locked out, except the ‘‘ZOOM’’ button. Touching the ‘‘ ’’ or ‘‘ ’’ button allows you to adjust the brightness of the rearview camera image. The camera brightness cannot be adjusted by voice control. Whenever you shift to reverse (R) with the ignition switch in the ON (II) position, the rear view is shown on the navigation system screen.
Main Menu Before Driving Break-in Period ........................... Fuel Recommendation ................ Service Station Procedures ......... Refueling................................. Opening and Closing the Hood ................................... Oil Check ................................ Engine Coolant Check ............ Fuel Economy ............................. Accessories and Modifications .......................... Carrying Cargo ...........................
Main Menu Table Of Contents Break-in Period, Fuel Recommendation Break-in Period Help assure your vehicle's future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: ● ● ● ● Avoid full-throttle starts and rapid acceleration. Do not change the oil until the scheduled maintenance time. Avoid hard braking for the first 200 miles (300 km). Do not tow a trailer.
Main Menu Table Of Contents Fuel Recommendation, Service Station Procedures If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. For further important fuel-related information, please refer to your Quick Start Guide. Refueling 1. Park with the driver's side closest to the service station pump. 2. Outside of the vehicle, open the fuel fill door by pulling its notched edge. ● Stop the engine and keep heat, sparks, and flame away.
Main Menu Table Of Contents Service Station Procedures Opening and Closing the Hood SUPPORT ROD HOOD RELEASE HANDLE LATCH CLIP 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. 2. Put your fingers under the front edge of the hood near the center. The hood latch handle is above the ‘‘H’’ logo. Push this handle up to release it. Lift up the hood.
Main Menu Table Of Contents Service Station Procedures Engine Coolant Check Oil Check MAX DIPSTICK RESERVE TANK UPPER MARK LOWER MARK 1. Remove the dipstick (orange tab). 2. Wipe the dipstick with a clean cloth or paper towel. If it is near or below the lower mark, see Adding Engine Oil on page 251. 3. Insert it all the way back in its tube. MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines.
Main Menu Table Of Contents Fuel Economy Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle.
Main Menu Table Of Contents Fuel Economy Fuel Economy Factors The following factors can lower your vehicle's fuel economy: ● ● ● ● ● Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires Improving Fuel Economy Vehicle Maintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy.
Main Menu Table Of Contents Fuel Economy ● ● Minimize the use of the air conditioning system - The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. Plan and combine trips - Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.
Main Menu Table Of Contents Accessories and Modifications Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle's handling and stability.
Main Menu Table Of Contents Accessories and Modifications Modifying Your Vehicle Removing parts from your vehicle, or replacing components with some non-Honda components could seriously affect your vehicle's handling, stability, and reliability. Some examples are: ● ● Lowering the vehicle with a nonHonda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.
Main Menu Table Of Contents Carrying Cargo Your vehicle has several convenient storage areas: CARGO AREA SIDE POCKET DOOR POCKETS OVERHEAD CONSOLEꭧ ● Cargo area side pockets ● Glove box ● ● ● CENTER CONSOLE COOLER BOXꭧ CARGO AREA ꭧ SEAT-BACK POCKETSꭧ Door pockets Seat-back pockets (EX and SC models) Cargo area (including rear seats when they are folded down, folded to the side, or removed) ● Seat-back bungees (EX model) ● Roof-rack (if installed) ● Center console (SC model) ● Cooler b
Main Menu Table Of Contents Carrying Cargo However, carrying too much cargo, or improperly storing it, can affect your vehicle's handling, stability, stopping distance, tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages. Load Limits The maximum load for your vehicle is 675 lbs (308 kg). See Tire And Loading Information label attached to the driver's doorjamb. Label Example Steps for Determining Correct Load Limit - 1.
Main Menu Table Of Contents Carrying Cargo 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
Main Menu Table Of Contents Carrying Cargo Carrying Items in the Passenger Compartment Store or secure all items that could be thrown around and hurt someone during a crash. ● ● ● ● Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the pedals, the seat operation, or the proper operation of the sensors under the seats. Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.
Main Menu Table Of Contents Carrying Cargo Seat-Back Bungee On EX model ADJUSTABLE BUNGEE CORD If the cords are not installed, route one cord through the loops as shown. To attach the hooks, press the top of the hook down, and slide to the desired position, then release. Adjust as needed. LOOP Before Driving Optional Cargo Net The cargo net can be used to help hold down light items in the cargo area. The cargo net may not prevent heavy items from being thrown forward in a crash or a sudden stop.
Main Menu Table Of Contents Carrying Cargo Cargo Hooks GROCERY HOOKS CARGO HOOKS The four hooks on the side panels can be used to install a net for securing items. Each hook is designed to hold up to 50 lbs (23 kg) of weight. Your vehicle also has a grocery hook on each side panel in the cargo area. They are designed to hold light items. Heavy objects may damage the hook. Make sure any items put on each hook weigh less than 6.5 lbs (3 kg).
Main Menu Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA®) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer or drive off-highway. 213 2009 Element Driving Driving Guidelines ...................... 214 Preparing to Drive .............
Main Menu Table Of Contents Driving Guidelines Your vehicle has a higher ground clearance that allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier. ● ● Do not modify your vehicle in any way that would raise the center of gravity. Do not carry heavy cargo on the roof. Because your vehicle rides higher off the ground, it has a high center of gravity that can cause it to roll over if you make abrupt turns.
Main Menu Table Of Contents Preparing to Drive You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 5. Check the seat adjustment (see page 83). 6. Check the adjustment of the inside and outside mirrors (see page 93). 7. Check the steering wheel adjustment (see page 74). 8. Make sure the doors, the hatch, and the tailgate are securely closed and locked. 9.
Main Menu Table Of Contents Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. Automatic transmission: Make sure the shift lever is in Park. Press on the brake pedal. 4. Without touching the accelerator pedal, turn the ignition key to the START (III) position.
Main Menu Table Of Contents Manual Transmission U.S. models Only Rapid slowing or speeding up can cause loss of control on slippery surfaces. If you crash, you can be injured. Use extra care when driving on slippery surfaces. When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill.
Main Menu Table Of Contents Manual Transmission Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control.
Main Menu Table Of Contents Automatic Transmission Shift Lever Position Indicators To shift from: Shifting P to R RELEASE BUTTON D3 BUTTON These indicators on the instrument panel show which position the shift lever is in. The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.
Main Menu Table Of Contents Automatic Transmission If you have done all of the above and still cannot move the lever out of Park, see Shift Lock Release on page 221. To avoid transmission damage, come to a complete stop before shifting into Park. You must also press the release button to shift into Park. The shift lever must be in Park before you can remove the key from the ignition switch.
Main Menu Table Of Contents Automatic Transmission Second (2) - This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop. Use second gear: ● ● ● ● To increase engine braking when going down steep hills. For starting out on a slippery surface or in deep snow. To help reduce wheel spin. When driving downhill with a trailer.
Main Menu Table Of Contents Automatic Transmission 6. Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the right side. Press the brake pedal, and restart the engine. COVER SHIFT LOCK RELEASE SLOT 3. Put a cloth on the edge of the shift lock release slot cover next to the shift lever. Using a flat-tip screwdriver, carefully pry on the edge of the cover to remove it. 4. Insert the key in the shift lock release slot. 5.
Main Menu Table Of Contents Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. ● ● ● ● ● ● Turn off the lights. Place any packages, valuables, etc. in the cargo area or take them with you. Lock the doors and the hatch with the key. Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.
Main Menu Table Of Contents Braking System Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The emergency brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.
Main Menu Table Of Contents Braking System, Anti-lock Brakes (ABS) Brake Pad Wear Indicators If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.
Main Menu Table Of Contents Anti-lock Brakes (ABS) ABS Indicator If this indicator comes on, the antilock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible. If the indicator comes on while driving, test the brakes as instructed on page 297.
Main Menu Table Of Contents Tire Pressure Monitoring System (TPMS) Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving. If you think you can safely drive a short distance to a service station, proceed slowly, and inflate the tire to the recommended pressure shown on the driver's doorjamb.
Main Menu Table Of Contents Tire Pressure Monitoring System (TPMS) For example, if you check and fill your tires in a warm area, then drive in extremely cold weather, the tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on. Or, if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions, the tire may become overinflated.
Main Menu Table Of Contents Tire Pressure Monitoring System (TPMS) The low tire pressure indicator or the TPMS indicator will go off, after several miles (kilometers) driving, when you replace the spare tire with the specified regular tire equipped with the tire pressure monitor sensor. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Driving Never use a puncture-repairing agent in a flat tire.
Main Menu Table Of Contents Vehicle Stability Assist (VSA®), aka Electronic Stability Control (ESC), System The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine's output and by selectively applying the brakes.
Main Menu Table Of Contents Vehicle Stability Assist (VSA®), aka Electronic Stability Control (ESC), System VSA OFF Switch In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA off if you are not able to free it when the VSA is on. This switch is under the driver's side vent.
Main Menu Table Of Contents Towing a Trailer Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section. Break-In Period Avoid towing a trailer during your vehicle's first 600 miles (1,000 km) (see page 198).
Main Menu Table Of Contents Towing a Trailer To achieve a proper tongue load, start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed.
Main Menu Table Of Contents Towing a Trailer Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow. To ensure the highest quality equipment, purchase Honda equipment whenever possible. Discuss your needs with your trailer sales or rental agency, and follow the guidelines in the rest of this section.
Main Menu Table Of Contents Towing a Trailer Trailer Lights Additional Towing Equipment Trailer lights and equipment must comply with federal, state, provincial, territorial, and local regulations. Check with your local trailer dealer or rental agency for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle. Many states, Canadian provinces and territories require special outside mirrors when towing a trailer.
Main Menu Table Of Contents Towing a Trailer Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following: ● ● ● ● ● The vehicle has been properly serviced, and the tires, brakes, suspension, cooling system, and lights are in good operating condition. ● Your vehicle tires and spare are properly inflated (see page 271), and the trailer tires and spare are inflated as recommended by the trailer maker.
Main Menu Table Of Contents Towing a Trailer Making Turns and Braking Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over. Driving on Hills If the automatic transmission shifts frequently while going up a hill, shift to D3.
Main Menu Table Of Contents Off-Highway Driving Guidelines General Information Your vehicle has been designed primarily for use on pavement. But its higher ground clearance allows you to occasionally travel on unpaved roads, such as campgrounds, picnic sites, and similar locations. It is not designed for trail-blazing, mountain climbing, or other challenging offroad activities. If you decide to drive on unpaved roads, you will find that it requires somewhat different driving skills.
Main Menu Table Of Contents Off-Highway Driving Guidelines Check Out Your Vehicle Before you leave the pavement, be sure to do all scheduled maintenance and service, and inspect your vehicle for any problems. Pay special attention to the condition of the tires, and check the tire pressures. Remember The route presents limits (too steep or bumpy roads). You have limits (driving skill and comfort). And your vehicle has limits (traction, stability, and power).
Main Menu Table Of Contents Off-Highway Driving Guidelines Crossing a Stream Avoid driving through deep water. If you encounter water in your route (a small stream or large puddle, for example), evaluate it carefully before going ahead. Make sure it is shallow, flowing slowly, and has firm ground underneath. If you are not sure of the depth or the ground, turn around and find another route. Driving through deep water can also damage your vehicle.
Main Menu Maintenance This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself. 242 243 250 251 Vehicle Storage ...........................
Main Menu Table Of Contents Maintenance Safety All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. ● ● ● Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed. Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
Main Menu Table Of Contents Maintenance Minder Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service. Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage. Engine Oil Life Display SELECT/RESET KNOB ENGINE OIL LIFE INDICATOR U.S.
Main Menu Table Of Contents Maintenance Minder MAINTENANCE MINDER INDICATOR MAINTENANCE ITEM CODE(S) ENGINE OIL LIFE INDICATOR U.S. model is shown. If the remaining engine oil life is 15 to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed above the ‘‘OIL LIFE’’ message.
Main Menu Table Of Contents Maintenance Minder The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page 246). NEGATIVE DISTANCE TRAVELED You can switch the information display from the engine oil life display to the odometer or the trip meter. Press and release the select/ reset knob on the instrument panel. When you see this message, have the indicated maintenance performed by your dealer as soon as possible. U.S. model is shown.
Main Menu Table Of Contents Maintenance Minder To change the information display from the engine oil life display to the odometer or the trip meter, press and release the select/reset knob. Maintenance Main Items and Sub Items MAINTENANCE MAIN ITEM When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ( ) remains on even if you change the information display.
Main Menu Table Of Contents Maintenance Minder U.S. model is shown. 4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’ Your authorized Honda dealer knows your vehicle best and can provide competent, efficient service. CONTINUED 247 2009 Element Maintenance 3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
Main Menu Table Of Contents Maintenance Minder However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log.
Main Menu Table Of Contents Maintenance Minder Symbol A B ● ● ● ● ● Symbol 1 2 ● ● ● ● 3 ● 4 ● ꭧ1: If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year. #: NOTE: See information on maintenance and emissions warranty on page 248. ● Independent of the maintenance message in the information display, replace the brake fluid every 3 years. ● Inspect idle speed every 160,000 miles (256,000 km).
Main Menu Table Of Contents Fluid Locations ENGINE OIL FILL CAP BRAKE FLUID (Gray cap) ENGINE OIL DIPSTICK (Orange tab) CLUTCH FLUID (Manual transmission only) (Gray cap) POWER STEERING FLUID (Red cap) AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR RADIATOR CAP 250 2009 Element
Main Menu Table Of Contents Adding Engine Oil ENGINE OIL FILL CAP Recommended Engine Oil Oil is a major contributor to your engine's performance and longevity. Always use a premium-grade 5W-20 detergent oil displaying the API certification seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute's latest requirements. Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick.
Main Menu Table Of Contents Adding Engine Oil, Changing the Engine Oil and Filter Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil, it displays the API certification seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the maintenance minder display. Changing the Engine Oil and Filter Always change the oil and filter according to the maintenance messages shown on the information display.
Main Menu Table Of Contents Changing the Engine Oil and Filter OIL FILTER 4. Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the connecting surface of a new oil filter. 5. Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 33 lbf·ft (45 N·m , 4.5 kgf·m) Make sure the oil filter gasket is not stuck to the engine block. If it is, remove it before installing a new oil filter.
Main Menu Table Of Contents Engine Coolant Adding Engine Coolant RESERVE TANK If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. Always use Honda Long-life Antifreeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.
Main Menu Table Of Contents Engine Coolant, Windshield Washers 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. Windshield Washers LEVEL GAUGE Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. RADIATOR CAP 2. Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down. 3.
Main Menu Table Of Contents Windshield Washers, Transmission Fluid On Canadian models: The low washer level indicator comes on when the level is low (see page 61). Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather. When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition them.
Main Menu Table Of Contents Transmission Fluid 5. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks. Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. Always use Honda Genuine ATF-Z1 (automatic transmission fluid). Manual Transmission Fluid Use only Honda Genuine ATF-Z1 (Automatic Transmission Fluid).
Main Menu Table Of Contents Transmission Fluid, Rear Differential Fluid, Brake and Clutch Fluid Put a new washer on the filler bolt, then reinstall the filler bolt and tighten it securely. If Honda MTF is not available, you may use an SAE 10W-30 or 10W-40 viscosity motor oil with the API Certification seal that says ‘‘FOR GASOLINE ENGINES’’ as a temporary replacement. However, motor oil does not contain the proper additives, and continued use can cause stiffer shifting.
Main Menu Table Of Contents Brake and Clutch Fluid Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible. Brake Fluid Clutch Fluid On vehicles with manual transmission MAX MAX Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.
Main Menu Table Of Contents Power Steering Fluid, Cleaning the Body Panels Power Steering Fluid UPPER LEVEL Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible. A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.
Main Menu Table Of Contents Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. Handle it by its steel base and protect the glass from contact with your skin or hard objects.
Main Menu Table Of Contents Lights 5. Install the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-down wire back in place, and clip the end into the slot. Replacing a Daytime Running Light Bulb TAB 6. Install the rubber seal over the back of the headlight assembly. Make sure one of the three arrows on the rubber seal is facing up; it is marked ‘‘ ’’. 2. Remove the electrical connector from the bulb by pulling the connector straight back. 3.
Main Menu Table Of Contents Lights 4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. Replacing a Front Parking/Turn Signal Light Bulb 4. Install the new bulb in the socket by pushing the bulb in and turning it clockwise until it locks. 5. Test the lights to make sure the new bulb is working. 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Test the lights to make sure the new bulb is working. Maintenance 1.
Main Menu Table Of Contents Lights Replacing a Side Turn Signal Bulb CLIP WHEEL ARCH PROTECTOR SCREWS 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the right. 3. Use a flat-tipped screwdriver to remove the holding clip from the inner fender. 5.
Main Menu Table Of Contents Lights 9. Put the inner fender cover in place. Install the holding clip. Lock the clip in place by pushing on the center. Install the wheel arch protector and tighten the screws securely. Replacing a Front Side Marker Light Bulb 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Reinstall the socket into the light assembly by turning it clockwise until it locks. 5. Test the lights to make sure the new bulb is working.
Main Menu Table Of Contents Lights Replacing Rear Bulbs SOCKET SOCKET SCREW 5. Reinstall the socket into the light assembly by turning it clockwise until it locks. 6. Test the lights to make sure the new bulb is working. 7. When reinstalling the taillight assembly, first place the two pins in the holes in place. Tighten the two mounting screws. SCREW TAILLIGHT ASSEMBLY 1. Open the hatch and the tailgate.
Main Menu Table Of Contents Lights Replacing a High-mount Brake Light Bulb Replacing a Rear License Plate Bulb TABS BULB SOCKET LENS LENS 2. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 4. Put the lens back on the socket until it locks. 5. Slide the right side of the light assembly into the hole. Push on the left side to latch the assembly into place. COVER 1. Open the hatch.
Main Menu Table Of Contents Lights, Cleaning the Seat Belts, Floor Mats Floor Mats Cleaning the Seat Belts If equipped LOOP BULB SOCKET 3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Press the brake pedal to make sure the new bulb is working. 5. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 6. Put the cover back onto the light assembly. Push it on until it locks in place.
Main Menu Table Of Contents Floor Mats, Dust and Pollen Filter, Wiper Blades If you remove the driver's floor mat, make sure to re-anchor it when you put it back in your vehicle. If you use non-Honda floor mats, make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats. Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the heating and cooling system. 1.
Main Menu Table Of Contents Wiper Blades BLADE REINFORCEMENT LOCK TAB 2. Disconnect the blade assembly from the wiper arm by pushing in the lock tab. Hold the lock tab in while you push the blade assembly toward the base of the arm. If you are changing the rear wiper blade, go to step 6. BLADE 4. Examine the new wiper blades.
Main Menu Table Of Contents Wheels, Tires Wheels Clean the wheels as you would the rest of the exterior. Wash them with the same solution, and rinse them thoroughly. Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. If equipped The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced.
Main Menu Table Of Contents Tires Even though your vehicle is equipped with TPMS, we recommend that you visually check your tires every day. If you think a tire might be low, check it immediately with a tire gauge. Use a gauge to measure the air pressure in each tire at least once a month. Even tires that are in good condition may lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm2) per month. Remember to check the spare tire at the same time. Check the air pressures when the tires are cold.
Main Menu Table Of Contents Tires The compact spare tire pressure is: 60 psi (420 kPa, 4.2 kgf/cm2) INDICATOR LOCATION MARKS For convenience, the recommended tire sizes and cold tire pressures are on a label on the driver's doorjamb. For additional technical information about your tires, see page 311. Tire Inspection Every time you check inflation, you should also examine the tires for damage, foreign objects, and wear. ● ● ● Bumps or bulges in the tread or side of the tire.
Main Menu Table Of Contents Tires Tire Maintenance In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. Have your dealer check the tires if you feel a consistent vibration while driving. A tire should always be rebalanced if it is removed from the wheel. When you have new tires installed, make sure they are balanced. This increases riding comfort and tire life.
Main Menu Table Of Contents Tires It is best to replace all four tires at the same time. If that is not possible or necessary, replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle's handling. If you ever replace a wheel, make sure that the wheel's specifications match those of the original wheels. Replacement wheels are available at your dealer. Always use the size and type of tires recommended in this owner's manual.
Main Menu Table Of Contents Tires Tire Chains Mount tire chains on your tires when required by driving conditions or local laws. Install them only on the front tires. On all models except SC Because your vehicle has limited tire clearance, use only SAE Class ‘‘S’’ cable-type traction devices, with rubber chain tensioners, on the front tires. Use traction devices only when required by driving conditions or local laws. Make sure they are the correct size for your tires.
Main Menu Table Of Contents Checking the Battery NEGATIVE TERMINAL If additional battery maintenance is needed, see your dealer or a qualified technician. WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling. TEST INDICATOR WINDOW POSITIVE TERMINAL Check the terminals for corrosion (a white or yellowish powder). To remove it, cover the terminals with a solution of baking soda and water. It will bubble up and turn brown.
Main Menu Table Of Contents Checking the Battery, Vehicle Storage On vehicles with navigation system The navigation system will also disable itself. The next time you turn on the ignition switch, the system will require you to enter a PIN before it can be used. Refer to the navigation system manual. Vehicle Storage If you need to park your vehicle for an extended period (more than 1 month), there are several things you should do to prepare it for storage.
Main Menu Table Of Contents Vehicle Storage ● ● Cover the vehicle with a ‘‘breathable’’ cover, one made from a porous material such as cotton. Non-porous materials, such as plastic sheeting, trap moisture, which can damage the paint. If possible, periodically run the engine until it reaches full operating temperature (the cooling fans cycle on and off twice). Preferably, do this once a month.
Main Menu Table Of Contents 280 2009 Element
Main Menu Taking Care of the Unexpected This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed. Compact Spare Tire .................... Changing a Flat Tire ................... If the Engine Won't Start ...........
Main Menu Table Of Contents Compact Spare Tire Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Check the inflation pressure of the compact spare tire every time you check the other tires. It should be inflated to: 60 psi (420 kPa, 4.2 kgf/cm2) Follow these precautions: ● ● ● ● ● Do not use your compact spare tire on another vehicle unless it is the same make and model.
Main Menu Table Of Contents Changing a Flat Tire If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes. 1. Park the vehicle on firm, level, and non-slippery ground. Put the transmission in Park (automatic) or reverse (manual). Apply the parking brake. TOOLS If you are towing a trailer, unhitch the trailer.
Main Menu Table Of Contents Changing a Flat Tire JACK WHEEL NUTS WHEEL NUT WRENCH 5. Push the rear edge of the handle to raise the handle loop and pull up the loop to raise the cargo area floor. 6. Unscrew the wing bolt, and take the spare tire out of the cargo area. 7. Remove the tools and the jack. To remove the jack, turn the jack's end bracket counterclockwise to loosen it. 284 2009 Element 8. Loosen the five wheel nuts 1/2 turn with the wheel nut wrench.
Main Menu Table Of Contents Changing a Flat Tire EXTENSION JACKING POINTS 10. Use the extension and the wheel nut wrench as shown to raise the vehicle until the flat tire is off the ground. 11. Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. CONTINUED 285 2009 Element Taking Care of the Unexpected 9. Locate the jacking point nearest the tire you need to change.
Main Menu Table Of Contents Changing a Flat Tire 13. Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. WHEEL NUTS WHEEL NUTS WHEEL COVER On LX model Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. BRAKE HUB 12.
Main Menu Table Of Contents Changing a Flat Tire 16. Store the jack in its holder. Turn the jack's end bracket to lock it in place. Store the tools. ARM 17. Remove the center cap (if equipped) from the flat tire, and store it in the spare tire well. 14. Lower the vehicle to the ground, and remove the jack. Store the wheel, jack, and tools securely before driving. WING BOLT 18. Remove the wing bolt on the spare tire mount, and pivot the arm 90° to the upright position.
Main Menu Table Of Contents Changing a Flat Tire 22. Secure the flat tire by screwing the wing bolt to the spare tire mount through the hole in the cargo area floor. WING BOLT 23. Your vehicle's original tire has a tire pressure monitoring system sensor. To replace a tire, refer to Changing a Tire with TPMS (see page 228). SPACER CONE 19. Remove the small round plug from the cargo area floor by pushing it from the back side to make a hole. Store the removed plug in a place you can easily remember. 20.
Main Menu Table Of Contents If the Engine Won't Start Diagnosing why the engine won't start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position: ● ● You hear nothing, or almost nothing. The engine's starter motor does not operate at all, or operates very slowly. You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.
Main Menu Table Of Contents If the Engine Won't Start The Starter Operates Normally In this case, the starter motor's speed sounds normal, or even faster than normal, when you turn the ignition switch to the START (III) position, but the engine does not run. ● ● Are you using a properly coded key? An improperly coded key will cause the immobilizer system indicator in the instrument panel to blink rapidly (see page 60).
Main Menu Table Of Contents Jump Starting Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. Keep all sparks, open flames, and smoking materials away from the battery. 1. Open the hood, and check the physical condition of the battery. In very cold weather, check the condition of the electrolyte. If it seems slushy or frozen, do not try jump starting until it thaws.
Main Menu Table Of Contents Jump Starting 5. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. 6. Start your vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. 3. Connect one jumper cable to the positive (+) terminal on your battery. Connect the other end to the positive (+) terminal on the booster battery. 4.
Main Menu Table Of Contents If the Engine Overheats The pointer of the vehicle's temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If the vehicle overheats, you should take immediate action. The only indication may be the temperature gauge climbing to or above the red mark. Or you may see steam or spray coming from under the hood. Do not open the hood if steam is coming out. 1.
Main Menu Table Of Contents If the Engine Overheats 5. Look for any obvious coolant leaks, such as a split radiator hose. Everything is still extremely hot, so use caution. If you find a leak, it must be repaired before you continue driving (see Emergency Towing on page 303). 6. If you don't find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is below the MIN mark. 7. If there was no coolant in the reserve tank, you may need to add coolant to the radiator.
Main Menu Table Of Contents Low Oil Pressure Indicator, Charging System Indicator Low Oil Pressure Indicator This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and you should take immediate action. 2. Let the vehicle sit for a minute. Open the hood, and check the oil level (see page 201).
Main Menu Table Of Contents Malfunction Indicator Lamp If this indicator comes on while driving, it means one of the engine's emissions control systems may have a problem. Even though you may feel no difference in your vehicle's performance, it can reduce your fuel economy and cause increased emissions. Continued operation may cause serious damage. If you have recently refueled your vehicle, the indicator coming on could be due to a loose or missing fuel fill cap.
Main Menu Table Of Contents Brake System Indicator Brake System Indicator (Red) U.S. Canada The brake system indicator (red) normally comes on when you turn the ignition switch to the ON (II) position, and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. If the fluid level is low, take your vehicle to a dealer, and have the brake system inspected for leaks or worn brake pads.
Main Menu Table Of Contents Fuses UNDER-HOOD INTERIOR TAB KNOBS The vehicle's fuses are located in two fuse boxes. The under-hood fuse box is located in the engine compartment on the driver's side. To open it, push the tabs as shown. The interior fuse box is underneath the steering column. To remove the fuse box lid, turn the knobs clockwise and pull the lid out of its hinges. Checking and Replacing Fuses If something electrical in your vehicle stops working, check for a blown fuse first.
Main Menu Table Of Contents Fuses FUSE BLOWN BLOWN 4. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided in the under-hood fuse box. 5. Look for a blown wire inside the fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower. CONTINUED 299 2009 Element Taking Care of the Unexpected 3.
Main Menu Table Of Contents Fuses If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio). If you replace the blown fuse with a spare fuse that has a lower rating, it might blow out again. This does not indicate anything wrong.
Main Menu Table Of Contents Fuse Locations No. 12 13 14 15 16 17 18 19 20 21 22 23 24 25 INTERIOR FUSE BOX Amps. 7.5 A 10 A 10 A 20 A 15 A 15 A 15 A 7.5 A 20 A - 20 A 20 A - - Circuits Protected Daytime Running Lights SRS Remote Control Mirrors LAF Heater Ignition Relay Fuel Pump Front Accessory Power Socket Turn Signal Lights Front Wiper Not Used Passenger's Power Window Driver's Power Window Not Used Not Used ꭧ: If equipped Amps.
Main Menu Table Of Contents Fuse Locations No. Amps. 13 40 A 14 40 A 15 15 A 16 15 A 17 15 A 18 30 A 19 100 A 20 50 A 21-25 7.5 A-30 A UNDER-HOOD FUSE BOX No. 1 2 3 4 5 6 Amps. 30 A 15 A 7.5 A 20 A 15 A 15 A Circuits Protected Condenser Fan Small Light Interior Light Cooling Fan Motor Hazard FI ECU No. 7 8 9 10 11 12 Amps.
Main Menu Table Of Contents Emergency Towing If your vehicle needs to be towed, call a professional towing service or organization. Never tow your vehicle with just a rope or chain. It is very dangerous. The only way you can safely tow your vehicle is with flat-bed equipment. The operator will load your vehicle on the back of a truck. Any other method of towing will damage the drive system. When you contact the towing agency, inform them a flat-bed is required.
Main Menu Table Of Contents 304 2009 Element
Main Menu Technical Information The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your vehicle's tires and emissions control systems. Three Way Catalytic Converter ................................ 318 Emissions Testing....................... 319 Technical Information Identification Numbers ............... 306 Specifications ..............................
Main Menu Table Of Contents Identification Numbers Your vehicle has several identifying numbers located in various places. VEHICLE IDENTIFICATION NUMBER (VIN) The vehicle identification number (VIN) is the 17-digit number your dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver's side.
Main Menu Table Of Contents Identification Numbers The engine number is stamped into the engine block. ENGINE NUMBER The transmission number is on a label on top of the transmission.
Main Menu Table Of Contents Specifications 169.9 in (4,316 mm)ꭧ1ꭧ2 Seating Capacities Total 4 170.4 in (4,328 mm)ꭧ3 Front 2 Width 71.6 in (1,819 mm) Rear 2 Height 70.4 in (1,788 mm)ꭧ1,ꭧ2 Engine Type Dimensions Length 69.6 in (1,768 mm)ꭧ3 Wheelbase Track 101.4 in (2,575 mm) Front Rear Weights Gross vehicle weight rating Water cooled 4-stroke DOHC i-VTEC 4-cylinder gasoline engine 62.1 in (1,577 mm)ꭧ1,ꭧ2 Bore x Stroke 3.43 x 3.90 in (87.0 x 99.0 mm) 62.
Main Menu Table Of Contents Specifications Capacities Fuel tank Approx. 15.9 US gal (60 L) Engine oil Capacities Engine coolant Changeꭧ1 Automatic Transmission Changeꭧ2 1.35 US gal (5.1 L) Total 1.90 US gal (7.2 L) Including filter 4.4 US qt (4.2 L) Without filter 4.2 US qt (4.0 L) Manual Transmission 5.6 US qt (5.3 L) Changeꭧ2 1.37 US gal (5.2 L) Total 1.93 US gal (7.3 L) Total Automatic transmission fluid Change 4WD 2.6 US qt (2.5 L) 2WD 2.7 US qt (2.
Main Menu Table Of Contents Specifications Air Conditioning Refrigerant type HFC-134a (R-134a) Charge quantity 17.6 - 19.4 oz (500 - 550 g) Lubricant type Fuses Interior See page 301 or the fuse label attached to the inside of the fuse box door under the steering column.
Main Menu Table Of Contents DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Main Menu Table Of Contents DOT Tire Quality Grading (U.S. Vehicles) Temperature The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Main Menu Table Of Contents Tire Labeling The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. TIRE LABELING EXAMPLE (1) Tire Size Tire Identification Number (TIN) Whenever tires are replaced, they should be replaced with tires of the same size. Following is an example of tire size with an explanation of what each component means. The tire identification number (TIN) is a group of numbers and letters that look like the following example.
Main Menu Table Of Contents Tire Labeling, Tire Pressure Monitoring System (TPMS) - Required Federal Explanation Maximum Tire Pressure Max Press - The maximum air pressure the tire can hold. Maximum Tire Load Max Load - The maximum load the tire can carry at maximum air pressure.
Main Menu Table Of Contents Tire Pressure Monitoring System (TPMS) - Required Federal Explanation Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.
Main Menu Table Of Contents Emissions Controls The burning of gasoline in your vehicle's engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
Main Menu Table Of Contents Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include three systems: PGM-FI, ignition timing control, and three way catalytic converter. These three systems work together to control the engine's combustion and minimize the amount of HC, CO, and NOx that comes out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
Main Menu Table Of Contents Three Way Catalytic Converter The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent. The three way catalytic converter must operate at a high temperature for the chemical reactions to take place.
Main Menu Table Of Contents Emissions Testing Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
Main Menu Table Of Contents Emissions Testing 7. Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (automatic) or 5th (manual). Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
Main Menu Warranty and Customer Relations 322 323 324 325 321 2009 Element Warranty and Customer Relations Customer Service Information .... Warranty Coverages ................... Reporting Safety Defects (U.S. Vehicles) ................................. Authorized Manuals ....................
Main Menu Table Of Contents Customer Service Information Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership's management. The service manager or general manager can help. Almost all problems are solved in this way. If you are dissatisfied with the decision made by the dealership's management, contact Honda Customer Service. U.S.
Main Menu Table Of Contents Warranty Coverages U.S. Owners Your new vehicle is covered by these warranties: New Vehicle Limited Warranty - Emissions Control Systems Defects Warranty and Emissions Performance Warranty - these two warranties cover your vehicle's emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty - this warranty gives up to 100% credit toward a replacement battery.
Main Menu Table Of Contents Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Main Menu Table Of Contents Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order by phone or online: Call Helm Inc. at (800)782-4356 (credit card orders only) ● Go online at www. helminc. com If you are interested in other years or models, contact Helm Inc. at (800) 782-4356.
Main Menu Table Of Contents 326 2009 Element
Main Menu Index A B Battery Charging System Indicator ........................ 58, 295 Jump Starting .......................... 291 Maintenance ........................... 277 Specifications .......................... 310 Before Driving ........................... 197 Belts, Seat ................................ 8, 18 Beverage Holders ........................ 99 Booster Seats ............................... 50 Brakes Anti-lock Brakes (ABS) ........... 225 Break-in, New Linings .............
Main Menu Index Bulbs, Halogen .......................... 261 Bungee Cords ............................ 211 C Capacities Chart ......................... 309 Carbon Monoxide Hazard ............ 52 Cargo ......................................... 207 Cargo Area Light .......................... 96 Cargo Hook ................................ 212 Cargo, How to Carry .................. 207 Carrying Cargo .......................... 207 CAUTION, Explanation of ............ iii CD Care ..............................
Main Menu Index E Economy, Fuel ........................... 202 Emergencies on the Road .......... 281 Battery, Jump Starting ............. 291 Brake System Indicator ..... 58, 297 Changing a Flat Tire ............... 283 Charging System Indicator ........................ 58, 295 Checking the Fuses ................ 298 Driving with a Flat Tire ........... 282 Hazard Warning Flashers ........ 73 Jump Starting .......................... 291 Low Oil Pressure Indicator ........................
Main Menu Index Filling the Fuel Tank .................. 199 Filters Dust and Pollen ....................... 269 Oil ........................................... 252 Flashers, Hazard Warning ........... 73 Flat Tire, Changing a ................. 283 Floor Mats ................................. 268 Fluids Automatic Transmission ......... 256 Brake ...................................... 258 Clutch ..................................... 258 Manual Transmission .............. 257 Power Steering .................
Main Menu Index Heating and Cooling .................. 104 Hood, Opening and Closing the .......................................... 200 Horn ............................................ 69 Hydraulic Clutch ........................ 258 I Inspection, Tire .......................... 273 Installing a Child Seat .................. 43 Instrument Panel .......................... 57 Instrument Panel Brightness ....... 72 Instruments and Controls ............. 55 Interior Lights ..............................
Main Menu Index LATCH Anchorage System .......... 44 Light Control Switch .................... 95 Lights Bulb Replacement ................... 261 Indicator ................................... 57 Interior ..................................... 95 Parking .................................... 71 Turn Signal .............................. 71 Load Limit .................................. 208 LOCK (Ignition Key Position) ...... 79 Locks Anti-theft Steering Column ....... 79 Fuel Fill Door ........................
Main Menu Index Oxygenated Fuels ...................... 198 P R Radiator Overheating ................. 293 Radio/CD Sound System ........... 109 Radio Theft Protection ............... 188 Readiness Codes ........................ 319 Rear Differential Fluid ................ 258 Rear Lights, Bulb Replacement ........................... 266 Rear Seat, Folding ........................ 88 Rearview Camera and Monitor .................................. 196 Rear View Mirror .........................
Main Menu Index Rotation, Tire ............................. 274 S Safety Belts .............................. 8, 18 Safety Defects, Reporting (U.S. only) ....................................... 324 Safety Features .............................. 7 Airbags ...................................... 9 Head Restraints ........................ 13 Seat Belts .............................. 8, 14 Seats & Seat-Backs .............. 11, 12 Safety Labels, Location of ............. 53 Safety Messages .....................
Main Menu Index T Tachometer .................................. 64 Tailgate ........................................ 82 Open Indicator ......................... 61 Opening the ............................. 82 Taillights, Changing Bulbs in ..... 266 Taking Care of the Unexpected ............................ 281 Technical Descriptions DOT Tire Quality Grading (U.S. Vehicles) ............................. 311 Emissions Control Systems ..... 316 Three Way Catalytic Converter ............................
Main Menu Index Tools, Tire Changing ................. 283 Towing A Trailer .................................. 232 Emergency Wrecker ............... 303 TPMS (Tire Pressure Monitoring System ................................ 227 Indicator ............................ 63, 228 Required Federal Explanation ......................... 314 Transmission Checking Fluid Level, Automatic ............................ 256 Checking Fluid Level, Manual ................................ 257 Fluid Selection ................
Main Menu Index Wipers, Windshield Changing Blades ..................... 269 Operation ................................. 70 Worn Tires ................................. 273 Wrecker, Emergency Towing .... 303 X XM® Radio ..........................
Main Menu 2009 Element
Main Menu 2009 Element
Main Menu Service Information Summary Manual Transmission Fluid: Honda Manual Transmission Fluid preferred, or an SAE 10W-30 or 10W-40 motor oil as a temporary replacement (see page 257). Brake Fluid: Honda Heavy Duty Brake Fluid DOT 3 preferred, or a DOT 3 or DOT 4 brake fluid as a temporary replacement (see page 258). Recommended Engine Oil: API Premium grade 5W-20 detergent oil (see page 251). Capacity (including differential): 2.0 US qt (1.9 L) Oil change capacity (including filter): 4.4 US qt (4.
Main Menu Owner's Identification OWNER _________________________________________________________ ______________________________________________________________________________ ADDRESS _______________________________________________________ STREET _________________________________ _________________________________ ___________________ CITY STATE/PROVINCE/TERRITORY ZIP CODE/ POSTAL CODE V. I. N.