09/05/18 18:06:43 31TA5620 0002 Introduction Congratulations! Your selection of a 2010 Honda Accord was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your vehicle so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
09/05/18 18:06:49 31TA5620 0003 Introduction California Proposition 65 Warning WARNING: This product contains or emits chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Event Data Recorders This vehicle is equipped with one or more devices commonly referred to as event data recorders. These devices record front seat belt use, front passenger seat occupancy, airbag deployment data, and the failure of any airbag system component.
09/07/08 21:32:15 31TA5620_004 A Few Words About Safety Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.
09/05/18 18:07:18 31TA5620 0006 2010 Accord Sedan Online Reference Owner's Manual Contents Owner's Identification Form Your Vehicle at a Glance (main controls) ................................................................................................ 3 Driver and Passenger Safety (seat belts, SRS, and child protection) ............................................................. 5 Instruments and Controls (indicators, gauges, dashboard, and steering column) .....................................
09/05/18 18:07:39 31TA5620 0007 Overview of Contents Contents A convenient reference to the sections in this manual. Your Vehicle at a Glance A quick reference to the main controls in your vehicle. Driver and Passenger Safety Important information about the proper use and care of your vehicle’s seat belts, an overview of the supplemental restraint system, and valuable information on how to protect children with child restraints.
09/05/18 18:07:51 31TA5620 0008 Your Vehicle at a Glance MOONROOF SWITCH* (P.107) HOMELINK BUTTONS* (P.226) CLOCK (P.214) COMPASS* (P.219) DRIVER’S FRONT AIRBAG (P.9, 23) PASSENGER’S FRONT AIRBAG (P.9, 23) MIRROR CONTROLS (P.102) HEATING/COOLING CONTROLS (P.120) CLIMATE CONTROL SYSTEM (P.125) POWER DOOR LOCK MASTER SWITCH (P.79) POWER WINDOW SWITCHES (P.103) AUDIO SYSTEM (P.133) HOOD RELEASE HANDLE (P.260) MANUAL TRANSMISSION (P.278) AUTOMATIC TRANSMISSION (P.280) TRUNK RELEASE LEVER (P.
09/05/18 18:08:00 31TA5620 0009 Your Vehicle at a Glance HEADLIGHTS/ TURN SIGNALS/ FOG LIGHTS*2 (P.69, 72) INSTRUMENT PANEL BRIGHTNESS (P.72) WINDSHIELD WIPERS/ PASSENGER AIRBAG OFF INDICATOR (P.30) WASHERS (P.68) HAZARD WARNING BUTTON (P.73) INTERFACE DIAL*3 (P.174) REMOTE AUDIO CONTROLS (P.211) VEHICLE STABILITY ASSIST (VSA) SYSTEM OFF SWITCH (P.290) BLUETOOTH HANDSFREELINK VOICE CONTROL BUTTONS*2 (P.230) NAVIGATION SYSTEM VOICE CONTROL BUTTONS*3 HORN*1 CRUISE CONTROL BUTTONS (P.
09/05/18 18:08:04 31TA5620 0010 Driver and Passenger Safety Important Safety Precautions .......... 6 Your Vehicle’s Safety Features........ 7 Seat Belts ........................................ 8 Airbags ............................................ 9 Protecting Adults and Teens.......... 11 1. Close and Lock the Doors ...... 11 2. Adjust the Front Seats ............ 11 3. Adjust the Seat-Backs ............. 12 4. Adjust the Head Restraints .... 13 5. Fasten and Position the Seat Belts ................
09/05/18 18:08:18 31TA5620 0011 Important Safety Precautions You’ll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them.
09/05/18 18:08:27 31TA5620 0012 Your Vehicle’s Safety Features (10) (8) (3) (4) (9) (1) (4) (7) (2) (11) (7) (2) (5) (8) (6) (1) Safety Cage (2) Crush Zones (3) Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Front Airbags (8) Side Airbags (9) Side Curtain Airbags (10) Door Locks (11) Automatic Seat Belt Tensioners Some features do not require any action on your part.
09/07/08 21:32:26 31TA5620_013 Your Vehicle’s Safety Features Seat Belts Your vehicle is equipped with seat belts in all seating positions. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. Why Wear Seat Belts Seat belts are the single most effective safety device for adults and larger children. (Infants and smaller children must be properly restrained in child seats.
09/05/18 18:08:53 31TA5620 0014 Your Vehicle’s Safety Features Airbags Driver and Passenger Safety Your vehicle has a supplemental restraint system (SRS) with front airbags to help protect the heads and chests of the driver and a front seat passenger during a moderate to severe frontal collision (see page 23 for more information on how your front airbags work).
09/05/18 18:09:01 31TA5620 0015 Your Vehicle’s Safety Features The most important things you need to know about your airbags are: Airbags do not replace seat belts. They are designed to supplement the seat belts. Airbags offer no protection in rear impacts, or minor frontal or side collisions. What you should do: Always wear your seat belt properly, and sit upright and as far back from the steering wheel as possible while allowing full control of the vehicle.
09/05/18 18:09:15 31TA5620 0016 Protecting Adults and Teens See pages 33 − 50 for important guidelines on how to properly protect infants, small children, and larger children who ride in your vehicle. 1.Close and Lock the Doors After everyone has entered the vehicle, be sure the doors are closed and locked. Locking the doors reduces the chance of someone being thrown out of the vehicle during a crash, and it helps prevent passengers from accidentally opening a door and falling out. 2.
09/07/08 21:32:35 31TA5620_017 Protecting Adults and Teens If you sit too close to the steering wheel or dashboard, you can be seriously injured by an inflating front airbag, or by striking the steering wheel or dashboard. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
09/07/08 21:32:42 31TA5620_018 Protecting Adults and Teens 4.Adjust the Head Restraints Adjust the seat-back to an upright position, and sit well back in the seat. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.
09/07/08 21:32:49 31TA5620_019 Protecting Adults and Teens This spreads the forces of a crash over the strongest bones in your upper body. 5.Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. Improperly positioning the seat belts can cause serious injury or death in a crash.
09/05/18 18:09:54 31TA5620 0020 Protecting Adults and Teens RELEASE BUTTON Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. This could cause If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt. Using a seat The front seats have adjustable seat belt anchors.
09/07/08 21:32:56 31TA5620_021 Protecting Adults and Teens In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag. Advice for Pregnant Women This will reduce the risk of injuries to both you and your unborn child that can be caused by a crash or an inflating front airbag. Sitting improperly or out of position can result in serious injury or death in a crash.
09/05/18 18:10:12 31TA5620 0022 Protecting Adults and Teens Additional Safety Precautions Two people should never use the same seat belt. If they do, they Keep your hands and arms away from the airbag covers. If your hands or arms are close to an airbag cover, they could be injured if the airbag inflates. Do not put any accessories on seat belts. Devices intended to improve Do not attach or place objects on the front airbag covers.
09/05/18 18:10:26 31TA5620 0023 Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all seating positions. The front seat belts are also equipped with automatic seat belt tensioners. This system uses the same sensors as the front airbags to monitor whether the front seat belts are latched or unlatched, and how much weight is on the front passenger’s seat (see pages 25 and 26 ).
09/05/18 18:10:37 31TA5620 0024 Additional Information About Your Seat Belts To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page 14 for how to properly position the belt). To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
09/07/08 21:33:04 31TA5620_025 Additional Information About Your Seat Belts The tensioners are designed to activate in any collision severe enough to cause the front airbags to deploy. If a side curtain airbag deploys during a side impact, the tensioner on that side of the vehicle will also deploy. The tensioners can also be activated during a collision in which the front airbags do not deploy. In this case, the airbags would not be needed, but the extra tension in the seat belt could be helpful.
09/05/18 18:10:58 31TA5620 0026 Additional Information About Your Airbags Airbag System Components (1) (9) (2) (14) (11) (5) Driver and Passenger Safety (13) (8) (8) (4) (1) Driver’s Front Airbag (2) Passenger’s Front Airbag (3) Control Unit (4) Front Seat Belt Tensioners (5) Side Airbags (6) Driver’s Seat Position Sensor (7) Front Passenger’s Weight Sensors (8) Front Impact Sensors (3) (9) Passenger Airbag Off Indicator (6) (10) Side Impact Sensors (First) (11) Occupant Position Detection Sy
09/05/18 18:11:09 31TA5620 0027 Additional Information About Your Airbags Your airbag system includes: Two SRS (supplemental restraint system) front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’s airbag is stored in the dashboard. Both are marked ‘‘SRS AIRBAG’’ (see page 23 ). Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked ‘‘SIDE AIRBAG’’ (see page 27 ).
09/05/18 18:11:22 31TA5620 0028 Additional Information About Your Airbags How Your Front Airbags Work During a frontal crash, your seat belt restrains your lower body and torso, and the front airbag helps protect your head and chest. An indicator on the dashboard that alerts you that the passenger’s front airbag has been turned off (see page 30 ). Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy.
09/05/18 18:11:31 31TA5620 0029 Additional Information About Your Airbags After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so. Dual-Stage Airbags Your front airbags are dual-stage airbags.
09/05/18 18:11:44 31TA5620 0030 Additional Information About Your Airbags Advanced Airbags Your front airbags are also advanced airbags. The main purpose of this feature is to help prevent airbagcaused injuries to short drivers and children or small-statured adults who ride in front. If the occupant’s belt is not latched, the airbag will deploy at a slightly lower threshold, because the occupant would need extra protection.
09/05/18 18:11:55 31TA5620 0031 Additional Information About Your Airbags Be aware that objects placed on the passenger’s seat can also cause the airbag to be turned off. When the passenger airbag gets turned off by the weight sensors, a ‘‘passenger airbag off’’ indicator in the center of the dashboard comes on (see page 30 ). PASSENGER’S SEAT WEIGHT SENSORS The passenger’s advanced front airbag system has weight sensors under the seat.
09/05/18 18:12:04 31TA5620 0032 Additional Information About Your Airbags How Your Side Airbags Work Also, make sure the floor mat behind the front passenger’s seat is properly positioned on the floor (see page 334 ). If it is not, the mat may interfere with the proper operation of the front passenger’s seat and its sensors. Only one airbag will deploy during a side impact. If the impact is on the passenger’s side, the passenger’s side airbag will deploy even if there is no passenger.
09/05/18 18:12:15 31TA5620 0033 Additional Information About Your Airbags Side Airbag Cutoff System Your vehicle has a side airbag cutoff system designed primarily to protect a child riding in the front passenger’s seat. Although Honda does not encourage children to ride in front, if the position sensors detect a child has leaned into the side airbag’s deployment path, the airbag will shut off.
09/07/08 21:33:14 31TA5620_034 Additional Information About Your Airbags One or both side curtain airbags may inflate in a moderate to severe frontal collision which causes the front airbags to deploy. To get the best protection from the side curtain airbags, occupants should wear their seat belts and sit upright and well back in their seats. How the SRS Indicator Works The SRS indicator alerts you to a potential problem with your airbags or seat belt tensioners.
09/05/18 18:12:40 31TA5620 0035 Additional Information About Your Airbags How the Side Airbag Off Indicator Works U.S. How the Passenger Airbag Off Indicator Works Canada This indicator alerts you that the passenger’s side airbag has been automatically shut off. It does not mean there is a problem with your side airbags. When you turn the ignition switch to the ON (II) position, the indicator should come on briefly and then go out (see page 57 ).
09/05/18 18:12:52 31TA5620 0036 Additional Information About Your Airbags Any items under the front passenger’s seat. Any object hanging on the seat or in the seat-back pocket. Any object(s) touching the rear of the seat-back. If no obstructions are found, have your vehicle checked by a dealer as soon as possible. Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced if: An airbag ever inflates.
09/05/18 18:12:59 31TA5620 0037 Additional Information About Your Airbags Additional Safety Precautions Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection. Do not tamper with airbag components or wiring for any reason. Tampering could cause the airbags to deploy, possibly causing very serious injury. Do not remove or modify a front seat without consulting your dealer.
09/07/08 21:34:19 31TA5620_038 Protecting Children − General Guidelines Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to properly protect child passengers. If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.
09/05/18 18:13:23 31TA5620 0039 Protecting Children − General Guidelines All Children Should Sit in a Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.
09/05/18 18:13:41 31TA5620 0040 Protecting Children − General Guidelines U.S. Models DASHBOARD SUN VISORS Driver and Passenger Safety To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
09/05/18 18:13:56 31TA5620 0041 Protecting Children − General Guidelines If You Must Drive with Several Children Your vehicle has a back seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page 47 ). Move the vehicle seat as far to the rear as possible (see pages 92 and 93 ).
09/05/18 18:14:05 31TA5620 0042 Protecting Children − General Guidelines seat belt around their neck, they can be seriously or fatally injured. (See pages 44 and 45 for how to activate and deactivate the lockable retractor.) Use the childproof door locks to prevent children from opening the rear doors. This can prevent children from accidentally falling out (see page 86 ). Do not leave children alone in a vehicle.
09/07/08 21:34:29 31TA5620_043 Protecting Infants and Small Children Protecting Infants Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rearfacing, reclining mode. Do not put a rear-facing child seat in a forward-facing position. If placed facing forward, an infant could be very seriously injured during a frontal collision.
09/05/18 18:14:31 31TA5620 0044 Protecting Infants and Small Children Protecting Small Children and weight are appropriate for a rear-facing seat. We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat. Placing a forward-facing child seat in the front seat of a vehicle equipped with a passenger’s airbag can be hazardous.
09/07/08 21:34:38 31TA5620_045 Protecting Infants and Small Children, Selecting a Child Seat If it is necessary to put a forwardfacing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.
09/05/18 18:14:52 31TA5620 0046 Selecting a Child Seat, Installing a Child Seat 3. The child seat should fit the vehicle seating position (or positions) where it will be used. 1. Properly secure the child seat to the vehicle. All child seats must be secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash. 2.
09/05/18 18:15:05 31TA5620 0047 Installing a Child Seat Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the outer rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anchor point. BUTTON LOWER ANCHORS To install a LATCH-compatible child seat: 1.
09/05/18 18:15:14 31TA5620 0048 Installing a Child Seat 7. Push and pull the child seat forward and from side-to-side to verify that it is secure. Driver and Passenger Safety TETHER STRAP HOOK Flexible type Other LATCH-compatible seats have a flexible-type connector as shown above. 4. Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit. ANCHOR 5.
09/05/18 18:15:23 31TA5620 0049 Installing a Child Seat Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt. In addition, the lap/shoulder belts in all seating positions except the driver’s have a lockable retractor that must be activated to secure a child seat. 1.
09/05/18 18:15:31 31TA5620 0050 Installing a Child Seat 4. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure. 5. Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers.
09/05/18 18:15:43 31TA5620 0051 Installing a Child Seat Installing a Child Seat with a Tether Using an Anchor TETHER STRAP HOOK Outer Position ANCHOR TETHER STRAP HOOK Center Position ANCHOR TETHER ANCHORAGE POINTS A child seat with a tether can be installed in any seating position in the back seat, using one of the anchorage points shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.
09/07/08 21:34:46 31TA5620_052 Protecting Larger Children When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear the lap/ shoulder belt. Allowing a child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.
09/05/18 18:16:04 31TA5620 0053 Protecting Larger Children 3. Does the shoulder belt cross between the child’s neck and arm? Using a Booster Seat 4. Is the lap part of the belt as low as possible, touching the child’s thighs? 5. Will the child be able to stay seated like this for the whole trip? If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.
09/05/18 18:16:15 31TA5620 0054 Protecting Larger Children When Can a Larger Child Sit in Front The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position.
09/05/18 18:16:26 31TA5620 0055 Protecting Larger Children If you decide that a child can safely ride up front, be sure to: Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information. Move the vehicle seat to the rearmost position. Additional Safety Precautions Do not let a child wear a seat belt across the neck. This could result in serious neck injuries during a crash.
09/07/08 21:34:54 31TA5620_056 Carbon Monoxide Hazard Have the exhaust system inspected for leaks whenever: Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you. Avoid any enclosed areas or activities that expose you to carbon monoxide. The vehicle is raised for an oil change. You notice a change in the sound of the exhaust. The vehicle was in a collision that may have damaged the underside.
09/05/18 18:17:03 31TA5620 0057 Safety Labels These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully. SUN VISORS U.S. models Canadian models If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement. DASHBOARD DOORJAMBS U.S. models only U.S.
09/05/18 18:17:09 31TA5620 0058 Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Seats .................................................. 92 Front Seat Power Adjustments .. 92 Front Seat Manual Adjustments ............................. 93 Driver’s Seat Manual Height Adjustment ............................... 94 Head Restraints ...........................
09/05/18 18:17:17 31TA5620 0059 Control Locations INSTRUMENT PANEL INDICATORS (P.55) GAUGES (P.63) MOONROOF SWITCH* (P.107) HOMELINK BUTTONS* (P.226) MIRROR CONTROL AUTO BUTTON* (P.101) CLOCK (P.214) COMPASS* (P.219) MIRROR CONTROLS (P.102) HEATING/COOLING CONTROLS (P.120) CLIMATE CONTROL SYSTEM (P.125) POWER DOOR LOCK MASTER SWITCH (P.79) AUDIO SYSTEM (P.133) POWER WINDOW SWITCHES (P.103) MANUAL TRANSMISSION (P.278) AUTOMATIC TRANSMISSION (P.280) HOOD RELEASE HANDLE (P.
09/05/18 18:17:26 31TA5620 0060 Instrument Panel DOOR AND TRUNK OPEN INDICATOR (P.60) MAINTENANCE MINDER INDICATOR (P.62) DAYTIME RUNNING LIGHTS INDICATOR (P.61) PARKING BRAKE AND BRAKE SYSTEM INDICATOR (P.57) SECURITY SYSTEM INDICATOR* (P.61) FOG LIGHT INDICATOR* (P.62) VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.58) IMMOBILIZER SYSTEM INDICATOR (P.62) CRUISE CONTROL MAIN INDICATOR (P.62) LOW TIRE PRESSURE INDICATOR (P.59) CRUISE CONTROL INDICATOR (P.
09/05/18 18:17:39 31TA5620 0061 Instrument Panel Indicators The instrument panel has many indicators to give you important information about your vehicle. Seat Belt Reminder Indicator This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passengers to fasten your seat belts. A beeper also sounds if you have not fastened your seat belt.
09/05/18 18:17:53 31TA5620 0062 Instrument Panel Indicators Parking Brake and Brake System Indicator U.S. Canada 1. It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. A beeper sounds if you drive with the parking brake not fully released. Driving with the parking brake not fully released can damage the brakes and tires. Side Airbag Off Indicator U.S.
09/05/18 18:18:06 31TA5620 0063 Instrument Panel Indicators Anti-lock Brake System (ABS) Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it comes on at any other time, there is a problem with the ABS. If this happens, have your vehicle checked at a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. For more information, see page 287 .
09/05/18 18:18:18 31TA5620 0064 Instrument Panel Indicators If this happens, pull to the side of the road when it is safe, check which tire has lost the pressure, and determine the cause. If it is because of a flat tire, replace the flat tire with the compact spare (see page 353 ), and have the flat tire repaired as soon as possible. If two or more tires are underinflated, call a professional towing service (see page 375 ). For more information, see page 291 .
09/05/18 18:18:29 31TA5620 0065 Instrument Panel Indicators Turn Signal and Hazard Warning Indicators The left or right turn signal indicator blinks when you signal a lane change or turn. If an indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see pages 328 and 330 ). Replace the bulb as soon as possible, since other drivers cannot see that you are signaling. Lights On Indicator This indicator reminds you that the exterior lights are on.
09/05/18 18:18:42 31TA5620 0066 Instrument Panel Indicators Low Fuel Indicator SECURITY SYSTEM INDICATOR High Beam Indicator This indicator comes on with the high beam headlights. For more information, see page 69 . This indicator also comes on with reduced brightness when the daytime running lights (DRL) are on (see page 71 ). When the needle reaches E, there is a very small amount of fuel in the tank. If equipped This indicator comes on when the security system is set.
09/05/18 18:19:01 31TA5620 0067 Instrument Panel Indicators Cruise Control Main Indicator This indicator comes on when you turn on the cruise control system by pressing the CRUISE button (see page 223 ). Cruise Control Indicator This indicator comes on when you set the cruise control. See page 223 for information on operating the cruise control. Fog Light Indicator Maintenance Minder Indicator This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position.
09/05/18 18:19:09 31TA5620 0068 Gauges TACHOMETER SPEEDOMETER Instruments and Controls TEMPERATURE GAUGE FUEL GAUGE OUTSIDE TEMPERATURE INDICATOR* TRIP METER SELECT/RESET KNOB ODOMETER/CHECK FUEL CAP MESSAGE U.S. model is shown.
09/05/18 18:19:16 31TA5620 0069 Gauges INFORMATION DISPLAY TRIP METER A ODOMETER ENGINE OIL LIFE OUTSIDE TEMPERATURE INDICATOR TRIP METER B : Press the select/reset knob. U.S. model with outside temperature indicator is shown. Information Display The information display shows the odometer, trip meter, engine oil life, outside temperature (if equipped), and maintenance item code(s). To switch the display, press and release the select/reset knob repeatedly.
09/05/18 18:19:31 31TA5620 0070 Gauges Outside Temperature Indicator If equipped The temperature sensor is in the front bumper. Therefore, the temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your speed is under 19 mph (30 km/h). The sensor delays the display update until it reaches the correct outside temperature. This may take several minutes.
09/05/18 18:19:42 31TA5620 0071 Gauges Check Fuel Cap Message If your fuel fill cap is loose or missing, a ‘‘CHECK FUEL CAP’’ message appears on the information display after you start the engine. For more information, see page 258 . Maintenance Minder The information display in the instrument panel shows you the engine oil life and maintenance service items when the ignition switch is in the ON (II) position.
09/05/18 18:19:49 31TA5620 0072 Controls Near the Steering Wheel INSTRUMENT PANEL BRIGHTNESS (P.72) WINDSHIELD WIPERS/ WASHERS (P.68) PASSENGER AIRBAG OFF INDICATOR (P.30) REMOTE AUDIO CONTROLS (P.211) VEHICLE STABILITY ASSIST (VSA) SYSTEM OFF SWITCH (P.290) BLUETOOTH HANDSFREELINK VOICE CONTROL BUTTONS*2 (P.230) NAVIGATION SYSTEM VOICE CONTROL BUTTONS*3 HORN*1 CRUISE CONTROL BUTTONS (P.223) REAR WINDOW DEFOGGER/ HEATED MIRROR BUTTON*2 (P.74, 102) SEAT HEATER SWITCHES*2 (P.
09/05/18 18:20:02 31TA5620 0073 Windshield Wipers and Washers Windshield Wipers Push the right lever up or down to select a position. LO − The wipers run at low speed. HI − The wipers run at high speed. MIST − The wipers run at high speed until you release the lever. OFF − The wipers are not activated. INT − The length of the wipe interval is varied automatically according to vehicle’s speed. ADJUSTMENT RING 1. MIST 2. OFF 3. INT − Intermittent 4. LO − Low speed 5. HI − High speed 6.
09/05/18 18:20:13 31TA5620 0074 Turn Signals and Headlights EX-L V6 model is shown. 1. Turn signal 2. Off 3. Parking and indicator lights 4. AUTO* 5. Headlights on 6. High beams 7. Flash high beams 8. Fog lights off * 9. Fog lights on* Headlights − Turning the switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the ‘‘ ’’ position turns on the headlights.
09/05/18 18:20:21 31TA5620 0075 Turn Signals and Headlights EX-L and EX-L V6 AUTO − The automatic lighting feature turns on the headlights and all other exterior lights, when it senses low ambient light. To turn on automatic lighting, turn the light switch to AUTO. The lights will come on automatically when the outside light level becomes low (at dusk, for example). The lights on indicator comes on as a reminder.
09/05/18 18:20:31 31TA5620 0076 Turn Signals and Headlights If you turn the ignition switch to the LOCK (0) position with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in the ‘‘AUTO’’ position).
09/05/18 18:20:41 31TA5620 0077 Fog Lights, Instrument Panel Brightness Fog Lights You can use the fog lights only when the headlights are on low beam. With the light switch in the AUTO position (if equipped), you can also use the fog lights when the headlights turn on automatically. They will go off when the headlights turn off, or the daytime running lights are on. EX-L V6 model is shown.
09/05/18 18:20:51 31TA5620 0078 Instrument Panel Brightness, Hazard Warning Button BRIGHTNESS LEVEL The level of brightness is shown on the information display while you adjust it. It goes out about 5 seconds after you finish adjusting. To reduce glare at night, the instrument panel illumination dims when you turn the light switch to or . Turning the select/ reset knob to the right until you hear a beep will cancel the reduced brightness.
09/05/18 18:21:02 31TA5620 0079 Rear Window Defogger U.S. LX, LX-P Manual A/C type Except U.S. LX, LX-P The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is on. It also shuts off when you turn off the ignition switch. You have to turn the defogger on again when you restart the vehicle.
09/07/08 21:35:01 31TA5620_080 Steering Wheel Adjustments 3. Push the lever up to lock the steering wheel in position. Make any steering wheel adjustments before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash. Adjust the steering wheel only when the vehicle is stopped. 1. Push the lever under the steering column all the way down. 2.
09/05/18 18:21:18 31TA5620 0081 Keys and Locks MASTER VALET KEY KEY (Light Grey) NUMBER KEY WITH REMOTE TAG TRANSMITTER You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Honda-approved key blanks. These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged.
09/05/18 18:21:28 31TA5620 0082 Immobilizer System The immobilizer system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. If you lose your key and you cannot start the engine, contact your dealer. Always take the ignition key with you whenever you leave the vehicle alone.
09/07/08 21:36:07 31TA5620_083 Ignition Switch If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key. ACCESSORY (I) − You can operate the audio system and the accessory power sockets in this position. The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), START (III) LOCK (0) − You can insert or remove the key only in this position. To turn the key, push it in slightly.
09/05/18 18:21:50 31TA5620 0084 Door Locks POWER DOOR LOCK MASTER SWITCH LOCK TAB Lock Lock Unlock RED INDICATOR To lock all doors, push the front of the master door lock switch on either front door, pull the lock tab rearward on the driver’s door, or use the key on the outside lock on the driver’s door. The lock tab on any passenger’s door locks and unlocks that door. When the door is unlocked, you can see the red indicator on the lock tab above the inner door handle.
09/05/18 18:22:01 31TA5620 0085 Door Locks Lockout Prevention If you forget and leave the key in the ignition switch, lockout prevention will not allow you to lock the driver’s door. With any door open and the key in the ignition switch, locking with the master door lock switch is disabled. If the driver’s door is closed, the lock tab on the driver’s door is not disabled. Pulling the driver’s lock tab rearward will lock all doors.
09/05/18 18:22:14 31TA5620 0086 Door Locks To turn off the Auto Door Lock modes: 3. Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds). To program the Park Lock mode: Locks all doors when the shift lever is moved out of the Park (P) position (A/T vehicles only). Instruments and Controls 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. 1.
09/05/18 18:22:25 31TA5620 0087 Door Locks 3. Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds). To program the Drive Lock mode: Locks all doors when the vehicle’s speed reaches about 9 mph (15 km/h). 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. 4. Push and hold the front of the master door lock switch on the driver’s door.
09/07/08 21:36:17 31TA5620_088 Door Locks Auto Door Unlocking The auto door unlocking feature has five possible settings: On A/T vehicles, the driver’s door unlocks when you move the shift lever to the Park (P) position with the brake pedal depressed. This is the default setting. To turn off the Auto Door Unlock modes: Instruments and Controls The auto door unlocking is deactivated all the time. The driver’s door unlocks whenever you turn the ignition switch to the ACCESSORY (I) position.
09/07/08 21:36:26 31TA5620_089 Door Locks 3. Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click, and after about 5 seconds, you will hear another click. To program the Park Unlock mode: Unlocks the driver’s door or all doors when the shift lever is moved into the Park (P) position with the brake pedal depressed (A/T vehicles only). 3. Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click.
09/07/08 21:36:36 31TA5620_090 Door Locks To program the Ignition Switch Unlock mode: Unlocks the driver’s door or all doors when the ignition switch is moved out of the ON (II) position. 3. On A/T vehicles, push and hold the brake pedal, then move the shift lever out of the Park (P) position. Until you hear another click (after about 5 seconds) to activate driver’s door unlock feature. Instruments and Controls 4. Push and hold the rear of the master door lock switch on the driver’s door.
09/05/18 18:23:11 31TA5620 0091 Door Locks, Remote Transmitter Childproof Door Locks Remote Transmitter LEVER Unlock Lock The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear doors. Each rear door has a lock lever near the edge. With the lever in the LOCK position (lever is down), the door cannot be opened from the inside regardless of the position of the lock tab.
09/05/18 18:23:21 31TA5620 0092 Remote Transmitter You can also open all power windows and the moonroof (if equipped) from outside the vehicle with the remote transmitter (see page 105 ). TRUNK − Press and hold this button for about 1 second to open the trunk. You cannot open the trunk if the key is in the ignition switch. Remote Transmitter Care Avoid dropping or throwing the transmitter. Protect the transmitter from extreme temperature. Do not immerse the transmitter in any liquid.
09/05/18 18:23:32 31TA5620 0093 Remote Transmitter Replacing the Transmitter Battery If it takes several pushes on the button to lock or unlock the doors, replace the battery as soon as possible. BATTERY Battery type: CR1616 SCREW TAB To replace the battery: 1. Remove the screw at the base of the transmitter with a small Phillips-head screwdriver. NOTE: Be careful when removing this screw as the head of the screw can strip out. 2.
09/05/18 18:23:39 31TA5620 0094 Remote Transmitter 4. Remove the old battery, and insert a new battery into the back of the cover with the + side facing down. Instruments and Controls An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal. As required by the FCC: This device complies with Part 15 of the FCC rules.
09/05/18 18:23:50 31TA5620 0095 Trunk Pull To close the trunk, press down on the trunk lid. Keep the trunk lid closed at all times while driving to avoid damaging the lid, and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard on page 51 . TRUNK RELEASE LEVER MASTER KEY To protect items in the trunk when you need to give the key to someone else: You can open the trunk in two ways: Pull up on the trunk release lever to the left of the driver’s seat. 1.
09/05/18 18:23:58 31TA5620 0096 Trunk Even if the trunk release lever is locked with the master key, you can open the trunk with the remote transmitter. Emergency Trunk Opener Parents should decide if their children should be shown how to use this feature. Instruments and Controls For more information about child safety, see page 36 . As a safety feature, your vehicle has a release lever on the trunk latch so the trunk can be opened from the inside.
09/05/18 18:24:15 31TA5620 0097 Seats Moves the whole seat up and forward, or down and backward. The front of the seat also tilts up or down at the same time. (Driver’s seat only) Front Seat Power Adjustments Except LX See pages 11 − 13 for important safety information and warnings about how to properly position the seats and seatbacks. The controls for the power adjustable front seats are on the outside edge of each seat bottom. You can adjust the seats with the ignition switch in any position.
09/05/18 18:24:25 31TA5620 0098 Seats Front Seat Manual Adjustments See pages 11 − 13 for important safety information and warnings about how to properly position the seats and seatbacks. To adjust the seat forward or backward, pull up on the bar under the seat cushion’s front edge. Move the seat to the desired position, and release the bar. Try to move the seat to make sure it is locked in position. To change the seat-back angle, pull up on the lever on the outside of the seat bottom.
09/07/08 21:36:43 31TA5620_099 Seats Driver’s Seat Manual Height Adjustment LX Head Restraints See page 13 for important safety information and a warning about improperly positioning head restraints. Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from the likelihood of whiplash and other injuries. They are most effective when you adjust them so the center of the back of the occupant’s head rests against the center of the restraint.
09/07/08 21:36:52 31TA5620_100 Seats Front Rear Center CUSHION CUSHION Failure to reinstall the head restraints can result in severe injury during a crash. LEGS SEAT-BACK RELEASE BUTTON LEGS SEAT-BACK Adjusting the Head Restraint Removing the Head Restraint The head restraints adjust for height. You need both hands to adjust a restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.
09/07/08 21:37:00 31TA5620_101 Seats Active Head Restraints against the likelihood of whiplash and injuries to the neck and upper spine. After a collision, the activated restraint should return to its normal position. If the restraints do not return to their normal position, or in the event of a severe collision, have the vehicle inspected by a Honda dealer. For a head restraint system to work properly: Do not hang any items on the head restraints, or from the restraint legs.
09/05/18 18:25:06 31TA5620 0102 Seats Folding Rear Seat The back of the rear seat folds down, giving you direct access to the trunk. The seat-back is released from inside the trunk. RELEASE GUIDE When storing cargo, you can move the rear center shoulder belt out of the way by removing the belt from the guide. To release the seat-back from inside the trunk, pull the release under the trunk panel. Push the seat-back down from inside the trunk, or pull the seat-back down from inside the vehicle.
09/05/18 18:25:18 31TA5620 0103 Seats Make sure that the folded seat-back does not press against the front passenger’s seat, as this could cause the weight sensors to work improperly. If the rear head restraints get caught on the front seat backs and you cannot fold down the rear seat-back fully, you can remove the head restraints (see page 95 ). Make sure the removed head restraints are securely stored. To lock the seat-back upright, push it firmly against the trunk panel.
09/05/18 18:25:28 31TA5620 0104 Seats Trunk Pass-through Cover Rear KEY CYLINDER KNOB Make sure all items in the trunk and those extending through the passthrough are secured. LID The rear seat armrest is in the center of the rear seat. Pivot it down to use it. A beverage holder is located in the armrest. Never drive with this cover open and the trunk lid open. See Carbon Monoxide Hazard on page 51 .
09/05/18 18:25:39 31TA5620 0105 Seat Heaters In the HI setting, the heater turns off when the seat gets warm, and turns back on after the seat’s temperature drops. Passenger’s Seat In the LO setting, the heater runs continuously. It does not cycle with temperature changes. HEATERS Follow these precautions whenever you use the seat heaters: Driver’s Seat EX-L and EX-L V6 Both front seats are equipped with seat heaters.
09/05/18 18:25:47 31TA5620 0106 Mirrors Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. SENSOR INDICATOR AUTO BUTTON TAB LX, LX-P, EX and EX V6 The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position. EX-L and EX-L V6 The inside mirror can automatically darken to reduce glare.
09/05/18 18:25:58 31TA5620 0107 Mirrors Adjusting the Power Mirrors SELECTOR SWITCH 3. Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down. Power Mirror Heaters REAR WINDOW DEFOGGER/ HEATED MIRROR BUTTON 4. When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings. EX-L V6 without navigation system is shown. ADJUSTMENT SWITCH 1. Turn the ignition switch to the ON (II) position.
09/07/08 21:37:07 31TA5620_108 Power Windows MAIN SWITCH INDICATOR Closing a power window on someone’s hands or fingers can cause serious injury. DRIVER’S WINDOW SWITCH FRONT PASSENGER’S WINDOW SWITCH To close either front window fully (driver’s window only on LX), pull back the window switch firmly to the second detent, then release it. The window automatically goes all the way up. To stop the window from going all the way up, push down on the window switch briefly.
09/05/18 18:26:13 31TA5620 0109 Power Windows When you push the main switch in, the indicator comes on and the passengers’ windows cannot be raised or lowered. Use the main switch when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally. To cancel this feature, push on the switch again. The switch will pop out and the indicator will go off.
09/05/18 18:26:28 31TA5620 0110 Power Windows Opening the Windows and Moonroof with the Remote Transmitter You can open all of the windows and the moonroof (if equipped) from the outside with the remote transmitter. 3. To open the windows and moonroof further, press the button again (within 10 seconds of step 1) and hold it. If the windows and the moonroof stop before the desired position, repeat steps 1 and 2. You cannot close the windows or the moonroof with the remote transmitter.
09/05/18 18:26:38 31TA5620 0111 Power Windows 3. Turn the key clockwise again, and hold it. All four windows and the moonroof start to open. To stop the windows and the moonroof, release the key. 4. To open the windows and the moonroof further, turn and hold the key again (within 10 seconds of step 2). To close: 1. Insert the key in the driver’s door lock. 2. Turn the key counterclockwise, then release it. 3. Turn the key counterclockwise again, and hold it.
09/07/08 21:37:15 31TA5620_112 Moonroof MOONROOF SWITCH Open Close To open the moonroof, pull back on the switch and hold it. Release the switch when the moonroof reaches the desired position. To close the moonroof, push the switch forward and hold it. Release the switch to stop the operation. AUTO − To open the moonroof fully, pull back the moonroof switch firmly, then release it. The moonroof automatically opens all the way. To stop the moonroof from opening, push the switch briefly.
09/05/18 18:26:57 31TA5620 0113 Moonroof Auto Reverse If the moonroof runs into any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the moonroof, remove the obstacle, then use the moonroof switch again. You can open and close the moonroof for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function. Auto reverse stops sensing when the moonroof is almost closed.
09/05/18 18:27:03 31TA5620 0114 Parking Brake Instruments and Controls Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on. PARKING BRAKE LEVER To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released (see page 57 ).
09/05/18 18:27:09 31TA5620 0115 Interior Convenience Items SUNGLASSES HOLDER DOOR POCKETS COAT HOOK VANITY MIRROR SUN VISOR CENTER POCKETS GLOVE BOX ACCESSORY POWER SOCKET BEVERAGE HOLDER AUXILIARY INPUT JACK ACCESSORY POWER SOCKET TRUNK BEVERAGE HOLDER in REAR SEAT ARMREST CONSOLE COMPARTMENT 110 2010 Accord Sedan
09/05/18 18:27:20 31TA5620 0116 Interior Convenience Items Beverage Holders Front Rear Front The rear seat also has a beverage holder in the center armrest. To use it, pivot the armrest down. Your vehicle has two accessory power sockets; one is at the front of the center console and the other is in the console compartment. To use an accessory power socket, the ignition switch must be in the ACCESSORY (I) or ON (II) position. Open the front beverage holder by pulling up on the lid.
09/05/18 18:27:29 31TA5620 0117 Interior Convenience Items CONSOLE COMPARTMENT None of the sockets will power an automotive type cigarette lighter element. Console Compartment LEVER Make sure to put the socket cover back in place to prevent any small foreign objects from getting into the socket. CONSOLE COMPARTMENT To open the console compartment, pull up on the lever and lift the armrest.
09/07/08 21:37:22 31TA5620_118 Interior Convenience Items Glove Box Sunglasses Holder To lock Push Always keep the glove box closed while driving. GLOVE BOX Open the glove box by pulling the handle to the left. Close it with a firm push. Lock or unlock the glove box with the master key. To open the sunglasses holder, push then release the indent. It will unlatch and swing down. To close it, push it until it latches. Make sure the holder is closed while you are driving.
09/05/18 18:27:48 31TA5620 0119 Interior Convenience Items Sun Visors Slide SUN VISOR Some larger styles of sunglasses may not fit in the holder. You may also store small items in this holder. Make sure they are small enough to let the holder close and latch, and that they are not heavy enough to cause the holder to pop open while driving. To use the sun visor, pull it down. When using the sun visor for the side window, remove the support rod from the clip, and swing it out.
09/05/18 18:27:59 31TA5620 0120 Interior Convenience Items Vanity Mirror Coat Hook Center Pockets To use the vanity mirror on the back of the sun visor, pull up the cover. To use a coat hook, slide it out slightly, then pull it down. The vanity mirror lights come on when you pull up the cover. Make sure the coat hook is folded up when you are not using it. This hook is not designed for large or heavy items. Pull up the lid to open each pocket.
09/05/18 18:28:11 31TA5620 0121 Interior Lights Ceiling Light DOOR ACTIVATED POSITION After all doors are closed tightly, the light dims slightly, then fades out in about 30 seconds. Spotlights The ceiling light (with the switch in the center position) comes on when you remove the key from the ignition switch. If you do not open a door, the light stays on, then fades out in about 30 seconds. The ceiling light has a three-position switch: ON, Door Activated, and OFF.
09/05/18 18:28:20 31TA5620 0122 Interior Lights OFF POSITION Courtesy Lights The courtesy light in each front door comes on when the door is opened, and goes out when the door is closed. Your vehicle also has a courtesy light in the ignition switch. This light comes on when you open the driver’s door. It fades out in about 30 seconds after the door is closed. SPOTLIGHT Except LX and LX-P The spotlights have a two-position switch. In the DOOR position, the lights come on when you open any door.
09/11/04 13:56:44 31TA5620_123 118 2010 Accord Sedan
09/05/18 18:28:31 31TA5620 0124 Features The heating and air conditioning system in your vehicle provides a comfortable driving environment in all weather conditions. Except LX and LX-P Your vehicle has an anti-theft audio system that requires a code number to enable it. LX and LX-P models Playing the FM/AM Radio ........... 134 Playing a Disc ................................. 141 Disc Player Error Messages ........ 148 Security System ............................. 217 Compass......................
09/05/18 18:28:37 31TA5620 0125 Vents, Heating, and A/C LX, LX-P, U.S. EX, and U.S.
09/05/18 18:29:02 31TA5620 0126 Vents, Heating, and A/C Fan Control Turn this dial to increase or decrease the fan speed and airflow. Temperature Control Turning this dial clockwise increases the temperature of the airflow. MAX A/C Button The system automatically turns on the A/C and switches to recirculation mode (see page 123 to use this setting). Air flows from the center and side vents in the dashboard. Pressing the , A/C, or any of the mode buttons cancels MAX A/C, but the A/C stays on.
09/05/18 18:29:24 31TA5620 0127 Vents, Heating, and A/C Air flows from the floor vents. When you select , the system automatically switches to fresh air mode. If you switch the mode from or to , the system keeps the A/C on. The A/C indicator will not come on if it was off to start with. To turn off the A/C, press the A/C button to illuminate the indicator, then press it again to turn off the A/C. When you switch to or mode from , the A/C turns off. But if it was on to start with, the A/C stays on.
09/05/18 18:29:41 31TA5620 0128 Vents, Heating, and A/C Using the A/C Air conditioning places an extra load on the engine. Watch the engine coolant temperature gauge (see page 66 ). If it moves near the red zone, turn off the A/C until the gauge reading returns to normal. If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning on the air conditioning, and setting the fan to maximum speed in fresh air mode.
09/05/18 18:30:00 31TA5620 0129 Vents, Heating, and A/C When you switch to , from or , the A/C stays on. This helps prevent the windows from rapidly fogging up when the air is suddenly routed away from the windshield. If you want to turn the A/C off, press and release the A/C button twice. The indicator in the button comes on and then goes off. To Remove Exterior Frost or Ice From the Windows . The system 1. Select automatically switches to fresh air mode and turns on the A/C.
09/07/08 21:38:15 31TA5620_130 Climate Control System U.S. EX-L and EX-L V6 Canadian EX, EX-L, and V6 models With navigation system PASSENGER’S SIDE TEMPERATURE CENTER DISPLAY DRIVER’S SIDE TEMPERATURE RECIRCULATION BUTTON AUTO INDICATOR AIR CONDITIONING (A/C) BUTTON REAR WINDOW DEFOGGER/ HEATED MIRROR BUTTON WINDSHIELD DEFROSTER BUTTON SYNC BUTTON AUTO BUTTON AUTO BUTTON ON/OFF BUTTON SYNC BUTTON RECIRCULATION BUTTON U.S. models are shown.
09/05/18 18:30:22 31TA5620 0131 Climate Control System Voice Control System On models with navigation system The climate control system can also be operated by voice control. See the navigation system manual for complete details. Using Automatic Climate Control The automatic climate control system in your vehicle maintains the interior temperature you select. The system also adjusts the fan speed and airflow levels. 1. Press the Auto button. The indicator in the button also comes on as a reminder.
09/05/18 18:30:36 31TA5620 0132 Climate Control System When you set the temperature to its lower limit ( ) or its upper limit ( ), the system runs at full cooling or heating only. It does not regulate the interior temperature. On models with navigation system In AUTO mode, the vehicle’s interior temperature is independently regulated for the driver and front passenger according to each adjusted temperature.
09/05/18 18:30:51 31TA5620 0133 Climate Control System Semi-automatic Operation You can manually select various functions of the climate control system when it is in fully automatic mode. All other features remain automatically controlled. Making any manual selection causes the word AUTO in the display to go out. Fan Control Air Conditioning (A/C) Button Recirculation Button This button turns the air conditioning on and off. You will see A/C ON or A/C OFF in the display.
09/05/18 18:31:13 31TA5620 0134 Climate Control System Rear Window Defogger Button This button turns the rear window defogger off and on (see page 74 ). Pushing this button also turns the power mirror heaters on and off. Air flows from the center and corner vents in the dashboard, and the vents on the back of the center console*. *: If equipped Windshield Defroster Button Use the mode control button to select the vents the air flows from. Some air will flow from the dashboard vents in all modes.
09/07/08 21:38:22 31TA5620_135 Climate Control System Dual Temperature Control Your vehicle has two temperature control switches, one for the driver, and one for the front passenger. Without navigation system The temperatures of the driver’s side and the front passenger’s side are controlled independently.
09/05/18 18:31:29 31TA5620 0136 Climate Control System Synchronized Control DRIVER’S SIDE PASSENGER’S SIDE Features The selected temperatures appear in the display (in the center display on models with navigation system). When the indicator in the SYNC button is on, you can adjust both sides to the same temperature by pushing the driver’s side temperature control switch up or down. When you set the temperature to its upper or lower limit, it is displayed as or . U.S. model is shown.
09/05/18 18:31:40 31TA5620 0137 Climate Control System Rear Ventilation Sunlight Sensor/Temperature Sensor REAR VENTS SUNLIGHT SENSOR DIAL Open Close TABS Except Canadian models The airflow from the rear vents can be adjusted when the AUTO mode is selected or the fan mode is in the or position. You can adjust the direction of the airflow by moving the tab on each vent up-and-down and side-to-side. You can also open or close the vents with the dial between them.
09/05/18 18:31:56 31TA5620 0138 Audio System An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system. LX and LX-P EX and EX V6 With navigation system EX-L and EX-L V6 without navigation system On LX model (including LX-P), see pages 134 through 148 . Features On EX and EX V6 models, and EX-L and EX-L V6 models without navigation system, see pages 149 through 173 . On models with navigation system, see pages 174 through 205 . U.S.
09/05/18 18:32:02 31TA5620 0139 Playing the FM/AM Radio (LX model) AM BUTTON TUNE (SOUND) KNOB PRESET BUTTONS FM BUTTON TITLE BUTTON A.
09/05/18 18:32:15 31TA5620 0140 Playing the FM/AM Radio (LX model) To Play the FM/AM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM or FM button. Adjust the volume by turning the power/volume knob. On the AM band, AM noise reduction turns on automatically. On the FM band, you can also use the features provided by the radio data system (RDS). For more information on the RDS, see page 137 .
09/05/18 18:32:27 31TA5620 0141 Playing the FM/AM Radio (LX model) Preset − Each preset button can store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. FM1 and FM2 let you store six stations each. 2. Use the tune, skip, scan, or RDS function to tune the radio to a desired station. 3. Pick a preset button (1−6), and hold it until you hear a beep. 4. Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
09/07/08 21:38:30 31TA5620_142 Playing the FM/AM Radio (LX model) If the station you are listening to is not an RDS station, the display continues to show the frequency with the RDS information display function on. RDS INFO Display When you turn off this function by pressing the TITLE button, the display shows ‘‘RDS INFO OFF.’’ The RDS information display function shows the name of the RDS station you are listening to.
09/05/18 18:32:56 31TA5620 0143 Playing the FM/AM Radio (LX model) Radio Data System (RDS) Category RDS CATEGORY On the FM band selected, you can select the program category provided by the RDS. Press either side of the FOLDER bar (▲ or ▼) to display and select an RDS category.
09/07/08 21:38:35 31TA5620_144 Playing the FM/AM Radio (LX model) RDS Program SCAN You can use the RDS program search or scan function even if the RDS information display function is off. Features The scan function samples all stations with strong signals on the selected RDS category. To activate it, press and release the SCAN button. You will see SCAN in the display. The system will scan for a station with a strong signal in the selected RDS category.
09/05/18 18:33:17 31TA5620 0145 Playing the FM/AM Radio (LX model) Adjusting the Sound Press the SOUND (TUNE) knob repeatedly to display the BASS, TREBLE, FADER, BALANCE, and SVC (speed-sensitive volume compensation) settings. SVC − Adjusts the volume level based on the vehicle speed. Each mode is shown in the display as it changes. Turn the TUNE knob to adjust the setting to your liking. BASS − Adjusts the bass. Except SVC adjustment TREBLE − Adjusts the treble.
09/05/18 18:33:24 31TA5620 0146 Playing a Disc (LX model) Features LOAD INDICATOR CD BUTTON DISC EJECT BUTTON TITLE BUTTON TUNE (SOUND) KNOB A.
09/05/18 18:33:37 31TA5620 0147 Playing a Disc (LX model) To Play a Disc To load or play a disc, the ignition switch must be in the ACCESSORY (I) or ON (II) position. You operate the disc player with the same controls used for the radio. To select the disc player, press the CD button. You will see ‘‘CD’’ in the display. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. This audio system can also play CD-Rs and CD-RWs compressed in MP3 or WMA formats.
09/05/18 18:33:51 31TA5620 0148 Playing a Disc (LX model) To Load a Disc Text Data Display Function Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way to play it. You operate the disc player with the same controls used for the radio. The number of the current track is shown in the display. When playing a disc in MP3 or WMA, the numbers of the current folder and file are shown. The system will continuously play a disc until you change modes.
09/05/18 18:34:01 31TA5620 0149 Playing a Disc (LX model) The display shows up to about 14 characters of selected text data (the folder name, file name, etc.). If the text data has more than 14 characters, you will see the first 14 characters and the indicator in the display. Press and hold the TITLE button until the next 14 characters are shown. When playing a CD-DA with text data, the album and track name are shown in the display. With a disc in MP3 or WMA, the display shows the folder and file name.
09/05/18 18:34:10 31TA5620 0150 Playing a Disc (LX model) In MP3 or WMA mode FOLDER-REPEAT − This feature, when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat, press the RPT side of the RPT/RDM bar twice. You will hear a beep and see F-RPT in the display. The system continuously replays the current folder. Press the RPT side of the bar again to turn it off.
09/05/18 18:34:21 31TA5620 0151 Playing a Disc (LX model) In MP3 or WMA mode FOLDER-RANDOM − This feature, when activated, plays all files in the selected folder in random order. To activate folder random, press the RDM side of the RPT/ RDM bar. You will see F-RDM in the display. The system will then select and play files randomly. This continues until you deactivate folder random by pressing and holding the RDM side of the bar again, or by selecting a different folder with the FOLDER bar.
09/05/18 18:34:31 31TA5620 0152 Playing a Disc (LX model) If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off. You can also eject the disc when the ignition switch is off. Protecting Discs For information on how to handle and protect compact discs, see page 206 .
09/05/18 18:34:41 31TA5620 0153 Disc Player Error Messages (LX model) The chart on the right explains the error messages you may see in the display while playing a disc. Error Message UNSUPPORTED If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page 207 . The audio system will try to play the disc.
09/05/18 18:34:51 31TA5620 0154 Audio System (EX, EX-L and V6 models without navigation system) The knob turns left and right. Use it to scroll through lists, or to make selections or adjustments to a list or menu item on the display. When you make a selection, push the center of the selector (ENTER) to go to that selection. Selector Knob SELECTOR KNOB MENU BUTTON Most audio system functions can be controlled by standard buttons, bars, and knobs.
09/05/18 18:35:02 31TA5620 0155 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) Without XM Radio With XM Radio POWER/ VOLUME KNOB POWER/ VOLUME KNOB AM BUTTON FM BUTTON TITLE AM BUTTON BUTTON SCAN BUTTON FOLDER BAR PRESET BUTTONS TITLE BUTTON FM BUTTON SCAN BUTTON SKIP BAR A.SEL (AUTO SELECTOR SELECT) BUTTON KNOB RETURN BUTTON MENU BUTTON CATEGORY BAR PRESET BUTTONS SKIP BAR A.SEL (AUTO SELECTOR SELECT) BUTTON KNOB RETURN BUTTON MENU BUTTON U.S.
09/05/18 18:35:14 31TA5620 0156 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) To Play the Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM or FM button. Adjust the volume by turning the power/volume knob. On the AM band, AM noise reduction turns on automatically. On the FM band, you can also use the features provided by the radio data system (RDS).
09/05/18 18:35:27 31TA5620 0157 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) Preset − Each preset button can store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. FM1 and FM2 let you store six stations each. 2. Use the tune, skip, scan, or RDS function to tune the radio to a desired station. 3. Pick a preset button, and hold it until you hear a beep. 4.
09/07/08 21:38:42 31TA5620_158 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) If the station you are listening to is not an RDS station, the display continues to show the frequency with the RDS information display function on. RDS INFO Display When you turn off this function by pressing the TITLE button, the display shows ‘‘RDS INFO OFF.’’ The RDS information display function shows the name of the RDS station you are listening to.
09/05/18 18:35:56 31TA5620 0159 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) Radio Data System (RDS) Category RDS CATEGORY On the FM band selected, you can select the program category provided by the RDS. Press either side (▲ or ▼) of the CATEGORY bar (FOLDER bar on models without XM radio) to display and select an RDS category.
09/07/08 21:38:50 31TA5620_160 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) RDS Program SCAN You can use the RDS program search or scan function even if the RDS information display function is off. Adjusting the Sound Selector knob adjustable direction is shown. Features The scan function samples all stations with strong signals on the selected RDS category. To activate it, press and release the SCAN button. You will see SCAN in the display.
09/05/18 18:36:26 31TA5620 0161 Playing the FM/AM Radio (EX, EX-L and V6 models without navigation system) If equipped SUBW − Adjusts the strength of sound from the subwoofer speaker. If the fader adjustment is set to F9 (maximum front level), the subwoofer is turned off. SVC − Adjusts the volume level based on the vehicle speed. SUBWOOFER is selectable. Each mode is shown in the display as it changes. Turn the selector knob to adjust the setting to your liking.
09/05/18 18:36:33 31TA5620 0162 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) Features XM RADIO BUTTON TITLE BUTTON POWER/VOLUME KNOB SCAN BUTTON CATEGORY BAR SKIP BAR RETURN BUTTON SELECTOR KNOB MENU BUTTON U.S. model is shown.
09/05/18 18:36:43 31TA5620 0163 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) Your vehicle is capable of receiving XM Radio anywhere in the United States and Canada, except Hawaii, Alaska, and Puerto Rico. XM is a registered trademark of Sirius XM Radio , Inc. and XM CANADA is a registered business name of Canadian Satellite Radio Inc. Operating the XM Radio To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or ON (II) position, and press the button.
09/05/18 18:36:52 31TA5620 0164 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) CATEGORY (▼ or ▲) − Press either side of the CATEGORY bar to select another category. TUNE − Turn the selector knob to change channel selections. Turn the knob right for higher numbered channels and left for lower numbered channels. In the category mode, you can only select channels within that category. You can also select a channel or category from the list by using the selector knob.
09/05/18 18:37:08 31TA5620 0165 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) Preset − You can store up to 12 preset channels using the six preset buttons. Each button stores one channel from the XM1 band and one channel from the XM2 band. To store a channel: button. Either 1. Press the XM1 or XM2 will show in the display. 2. Use the selector knob, or the CATEGORY bar or SCAN button to tune to a desired channel.
09/05/18 18:37:20 31TA5620 0166 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Signal weaker in these areas. Features Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
09/05/18 18:37:29 31TA5620 0167 Playing the XM Radio (EX-L and EX-L V6 models without navigation system) There may be other geographic situations that could affect XM Radio reception. As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
09/05/18 18:37:40 31TA5620 0168 Playing Discs (EX, EX-L and V6 models without navigation system) Without XM Radio With XM Radio MP3/WMA INDICATOR DISC LOAD BUTTON CD BUTTON DISC SLOT MP3/WMA INDICATOR POWER/VOLUME KNOB DISC LOAD BUTTON TITLE BUTTON SKIP BAR FOLDER BAR DISC SLOT PRESET BUTTONS PRESET BUTTONS DISC EJECT BUTTON DISC EJECT BUTTON SCAN BUTTON CATEGORY BAR MENU BUTTON SKIP BAR SELECTOR KNOB SELECTOR KNOB RETURN BUTTON CD/AUX BUTTON TITLE BUTTON RETURN BUTTON MENU BUTTON
09/05/18 18:37:51 31TA5620 0169 Playing Discs (EX, EX-L and V6 models without navigation system) To Play a Disc To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. You operate the disc changer with the same controls used for the radio. To select the disc changer, press the CD/AUX or CD button. You will see ‘‘CD’’ in the display. The disc and track numbers, and the elapsed time are shown in the display.
09/05/18 18:38:08 31TA5620 0170 Playing Discs (EX, EX-L and V6 models without navigation system) NOTE: If a file on a WMA disc is protected by digital rights management (DRM), the audio unit displays UNSUPPORTED, and then skips to the next file. Loading Discs Your vehicle’s in-dash disc changer holds up to six discs. 1. Press the LOAD button until you hear a beep and see ‘‘LOAD’’ in the display. To load only one disc, press and release the LOAD button. 2.
09/05/18 18:38:24 31TA5620 0171 Playing Discs (EX, EX-L and V6 models without navigation system) Text Data Display Function Each time you press the TITLE button, the display shows you the text, if the disc was recorded with text data. You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the artist, album, and track tag. With the folder name, you will see the FOLDER indicator in the display.
09/05/18 18:38:37 31TA5620 0172 Playing Discs (EX, EX-L and V6 models without navigation system) To Change or Select Tracks/Files Use the SKIP bar while a disc is playing to select passages and change tracks (files in MP3 or WMA mode). To select a different disc, use the appropriate preset buttons (1 through 6). If you select an empty position, the system will go into the loading sequence (see page 165 ).
09/05/18 18:38:48 31TA5620 0173 Playing Discs (EX, EX-L and V6 models without navigation system) In MP3 or WMA mode FOLDER SELECTION − To select a different folder, press either side (▲ or ▼) of the FOLDER bar (CATEGORY bar on models with XM Radio) to move to the beginning of the next folder. Press the ▲ side to skip to the next folder, and press the ▼ side to skip to the beginning of the previous folder.
09/07/08 21:39:52 31TA5620_174 Playing Discs (EX, EX-L and V6 models without navigation system) In MP3 or WMA mode REPEAT ONE FLD − This feature, when activated, replays all the files on the selected folder in the order they are compressed in MP3 or WMA. To activate folder repeat mode, select REPEAT ONE FLD from the menu items. You will see F-REPEAT in the display. The system continuously replays the current folder. Select normal play to turn it off.
09/05/18 18:39:03 31TA5620 0175 Playing Discs (EX, EX-L and V6 models without navigation system) SCAN TRK − The SCAN function samples all the tracks on the disc in the order they are recorded on the disc (all files in the selected folder in MP3 or WMA mode). To activate the scan feature, press and release the SCAN button. You will see SCAN in the display. You will get a 10 second sampling of each track/file in the disc/folder.
09/07/08 21:40:01 31TA5620_176 Playing Discs (EX, EX-L and V6 models without navigation system) When the first track on the last disc, or the first file in the last main folder in the last disc begins to play, the disc scan mode will be canceled. Pressing either side of the skip bar or selecting a different folder with the FOLDER or CATEGORY bar also turns off the scan feature. Each time you press and release the SCAN button, the mode changes from scan, disc scan, then to normal play.
09/05/18 18:39:24 31TA5620 0177 Playing Discs (EX, EX-L and V6 models without navigation system) If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off. Removing Discs from the In-dash Disc Changer To remove the disc currently in play, press the eject button.
09/05/18 18:39:33 31TA5620 0178 Disc Changer Error Messages (EX, EX-L and V6 models without navigation system) The chart on the right explains the error messages you may see in the display while playing a disc. Error Message HEAT ERROR The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc.
09/05/18 18:39:42 31TA5620 0179 Audio System (Models with navigation system) Interface Dial Most audio system functions can still be controlled by standard buttons, dials, and knobs, but some functions can only be accessed using the interface dial. The interface dial has two parts, a knob and a selector. ENTER KNOB SELECTOR The knob turns left and right. Use it to make selections or adjustments to a list or menu on the screen. The selector can be pushed left, right, up, down, and in.
09/05/18 18:39:50 31TA5620 0180 Playing the FM/AM Radio (Models with navigation system) NAVIGATION SCREEN Features POWER/VOLUME KNOB CENTER DISPLAY FM/AM BUTTON SOUND BUTTON SKIP BAR CATEGORY BAR TUNE BAR SCAN/A.SEL (SCAN/AUTO SELECT) BAR AUDIO BUTTON INTERFACE DIAL U.S. model is shown.
09/05/18 18:40:02 31TA5620 0181 Playing the FM/AM Radio (Models with navigation system) To Play the FM/AM Radio STEREO ICON BAND the FM/AM button. You can also change bands by pushing the interface selector up. Each time you push it up, the band will change to FM1, FM2, or AM. On the FM bands, STEREO will be shown on the navigation screen and ST on the center display, if the station is broadcasting in stereo. Stereo reproduction on AM is not available.
09/05/18 18:40:13 31TA5620 0182 Playing the FM/AM Radio (Models with navigation system) SCAN ICON SCAN − The SCAN function samples all stations with strong signals on the selected band. To activate it, press the SCAN side of the SCAN/A.SEL bar, then release it. To scan with the interface dial, push the selector down, and then push it to the right. You will see SCAN flashing on the screen. When the system finds a strong signal, it will stop and play that station for about 10 seconds.
09/05/18 18:40:25 31TA5620 0183 Playing the FM/AM Radio (Models with navigation system) 2. Use the tune, skip (seek), scan, or RDS function to tune the radio to a desired station. 3. Press the preset button, and hold it until you hear a beep. You can also store frequencies with the interface dial. Select the preset icon you want to store the frequency on, then press ENTER on the interface selector, and hold it for more than 2 seconds. 4.
09/05/18 18:40:35 31TA5620 0184 Playing the FM/AM Radio (Models with navigation system) To turn off auto select, press the A. SEL side of the bar. This restores the presets you originally set. For information on FM/AM radio frequencies and reception, see page 209 . Radio Data System (RDS) On the FM band, you can select a favorite station and display the program service name provided by the radio data system (RDS).
09/05/18 18:40:51 31TA5620 0185 Playing the FM/AM Radio (Models with navigation system) If the station you are listening to is not an RDS station, the audio screen and the center display continue to show the frequency. Radio Data System (RDS) Category When you turn off this function by pressing the TITLE button, the center display shows ‘‘PS OFF.’’ RDS SEARCH ICON With the FM band selected, you can select the program type provided by the RDS.
09/05/18 18:41:02 31TA5620 0186 Playing the FM/AM Radio (Models with navigation system) RDS Program Search RDS CATEGORY U.S. model is shown. Turn the selector to select an RDS category. You can use the search or scan function to find radio stations on the selected RDS category by pressing the selector to the right repeatedly. Press ENTER to set your selection. If you do nothing while the RDS category is selected, the selected category is canceled.
09/05/18 18:41:10 31TA5620 0187 Playing the FM/AM Radio (Models with navigation system) SEEK/SCAN ICON Turn the knob to the desired RDS category. While the RDS category is selected, move the selector knob to the right to select SEEK in the upper right corner of the screen. Then press ENTER to activate the seek function. RDS CATEGORY LIST SEEK is selected. To activate RDS program search with the interface dial, push the AUDIO button to display the FM radio information on the screen.
09/05/18 18:41:19 31TA5620 0188 Playing the FM/AM Radio (Models with navigation system) If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN side of the SCAN/ A.SEL bar again. Turn the knob to the desired RDS category. While the RDS category is selected, move the selector knob to the right to select SCAN in the upper right corner of the screen. Then press ENTER to activate the scan function.
09/05/18 18:41:28 31TA5620 0189 Playing the FM/AM Radio (Models with navigation system) Radio Text Display This function displays the radio text information of the selected RDS station. TEXT INDICATOR If the selected RDS station has the radio text information, you will see the text indicator on the screen. The text is displayed according to the information from RDS. RADIO TEXT ICON To activate radio text display, use the interface dial.
09/05/18 18:41:39 31TA5620 0190 Playing the FM/AM Radio (Models with navigation system) These adjustments can be made by the SOUND button or the interface dial. Features Adjusting the Sound BASS, TREBLE, FADER, and BALANCE are each adjustable. You can also adjust the strength of the sound coming from the subwoofer speaker. In addition, you can set the speed-sensitive volume compensation (SVC).
09/05/18 18:41:47 31TA5620 0191 Playing the FM/AM Radio (Models with navigation system) BASS/TREBLE − To adjust bass and treble, select BASS or TREBLE, and press ENTER on the interface selector. The current setting is shown on the display. Turn the interface knob to the desired level, and enter your selection by pressing ENTER on the interface selector. SUBWOOFER − To adjust the strength of the sound from the subwoofer speaker, select it and press ENTER on the interface selector.
09/05/18 18:41:55 31TA5620 0192 Playing the XM Radio (Models with navigation system) Features XM RADIO BUTTON TITLE BUTTON POWER/VOLUME KNOB PRESET BUTTONS CATEGORY BAR SKIP BAR SCAN/A.SEL (SCAN/AUTO SELECT) BAR TUNE BAR AUDIO BUTTON INTERFACE DIAL U.S. model is shown.
09/05/18 18:42:03 31TA5620 0193 Playing the XM Radio (Models with navigation system) Your vehicle is capable of receiving XM Radio anywhere in the United States and Canada, except Hawaii, Alaska, and Puerto Rico. XM is a registered trademark of Sirius XM Radio , Inc. and XM CANADA is a registered business name of Canadian Satellite Radio Inc. XM Radio receives signals from two satellites to produce clear, highquality digital reception. It offers many channels in several categories.
09/05/18 18:42:12 31TA5620 0194 Playing the XM Radio (Models with navigation system) In the category mode, such as Jazz, Rock, Classical, etc., you can navigate through all of the channels within that category. In the channel mode, you can select all of the available channels. Each time you press and release the TITLE button, the center display changes in the following sequence: NAME (artist name), TITLE (music title), and CHANNEL NAME (channel name).
09/05/18 18:42:25 31TA5620 0195 Playing the XM Radio (Models with navigation system) CATEGORY (▼ or ▲) − Press either side of the bar to select another category. You can also change a category by pushing the interface selector left or right. SCAN − The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate SCAN, press the SCAN side of the SCAN/A.SEL bar.
09/05/18 18:42:37 31TA5620 0196 Playing the XM Radio (Models with navigation system) button or scroll 5. Press the up again. The other XM band will be shown. Store the next six channels using steps 2 and 3. ‘‘LOADING’’ − XM is loading the audio or program information. ‘‘OFF AIR’’ − The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ − The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.
09/05/18 18:42:45 31TA5620 0197 Playing the XM Radio (Models with navigation system) Signal may be blocked by mountains or large obstacles to the south. Signal weaker in these areas. The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas.
09/05/18 18:42:58 31TA5620 0198 Playing the XM Radio (Models with navigation system) Driving on a road beside a vertical wall, steep cliff, or hill to the south of you. Driving on the lower level of a multi-tiered road. There may be other geographic situations that could affect XM Radio reception. As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
09/05/18 18:43:06 31TA5620 0199 Playing Discs (Models with navigation system) NAVIGATION SCREEN CENTER DISPLAY POWER/VOLUME KNOB TITLE BUTTON CD BUTTON PRESET BUTTONS SKIP BAR SCAN/A.SEL (SCAN/AUTO SELECT) BAR DISC EJECT BUTTON DISC LOAD BUTTON DISC SLOT AUDIO BUTTON INTERFACE DIAL U.S. model is shown.
09/05/18 18:43:21 31TA5620 0200 Playing Discs (Models with navigation system) Your vehicle’s audio system has an in-dash disc changer with the same controls used for the radio. To operate the disc changer, the ignition switch must be in the ACCESSORY (I) or the ON (II) position. The disc packages or jackets should have one of these marks. Video CDs and DVDs do not work in this unit. Some CD-DA and CD-ROM mixed discs are not playable. You cannot load and play 3-inch (8-cm) discs in this system.
09/05/18 18:43:35 31TA5620 0201 Playing Discs (Models with navigation system) Loading Discs in the Changer To load multiple discs in one operation: 1. With the ignition in the ACCESSORY (I) or the ON (II) position, press and hold the LOAD button until you hear a beep and see ‘‘LOAD’’ in the center display, then release the button. 2. Insert a disc into the slot. Insert it only about halfway; the drive will pull it in the rest of the way. You will see ‘‘BUSY’’ in the center display.
09/05/18 18:43:44 31TA5620 0202 Playing Discs (Models with navigation system) To Play a Disc The player can play CD-TEXT, MP3, and WMA formats. CURRENT DISC Select the changer by pressing the CD button. The system will begin playing the last selected disc in the disc changer. You will see the current disc position highlighted.
09/05/18 18:43:55 31TA5620 0203 Playing Discs (Models with navigation system) To Choose a Track You can also choose a track directly from a track list. Press ENTER on the interface selector, and the track list screen will be shown. If there are no track names, track numbers are displayed. You will see the current track is highlighted. Turn the interface knob to select the desired track, then press ENTER on the interface selector.
09/05/18 18:44:04 31TA5620 0204 Playing Discs (Models with navigation system) To Select Repeat or Random Mode: You can select any type of repeat and random modes by using the interface dial. Push the AUDIO button to display the audio information on the screen, then scroll down by pushing down the selector to select the audio menu. AUDIO MENU SCREEN Turn the interface knob to select a desired repeat or random mode, then press ENTER to set your selection.
09/05/18 18:44:13 31TA5620 0205 Playing Discs (Models with navigation system) Disc Repeat To replay the current disc continuously, select DISC REPEAT, and press ENTER on the interface selector. As a reminder, you will see REPEAT next to DISC on the screen. To turn this feature off, highlight DISC REPEAT (if not already highlighted), and press ENTER on the interface selector again.
09/05/18 18:44:30 31TA5620 0206 Playing Discs (Models with navigation system) The specifications for compatible MP3 files are: −Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) −Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session −Maximum layers (including ROOT): 8 layers The specifications for compatible WMA files are: −Sampling frequency: 32/44.
09/05/18 18:44:41 31TA5620 0207 Playing Discs (Models with navigation system) Changing and Selecting the Folders/ Files CURRENT TRACK MP3/WMA INDICATOR Using the interface selector, you can see the list of all the files and folders within a disc. While playing a MP3/ WMA disc, press the AUDIO button. The currently playing folder and file information comes on the screen. CURRENT FOLDER Push ENTER on the selector to show the folder list.
09/05/18 18:44:51 31TA5620 0208 Playing Discs (Models with navigation system) To listen to the rest of the folder, press and hold the SCAN side of the bar until you hear a beep. If you do nothing, the system advances to the next folder, plays 10 seconds of it, and continues with the remaining folders in the same way. When the system has finished sampling the first file in all folders, folder scan is canceled, and the last file played continues to play.
09/05/18 18:45:00 31TA5620 0209 Playing Discs (Models with navigation system) Removing Discs from the Changer To remove the disc that is currently playing, press the eject button. You will see ‘‘EJECT’’ in the center display. When you remove the disc from the slot, the system automatically enters the previous mode AM, FM1, FM2, or XM Radio. The system also begins the load sequence so you can load another disc.
09/05/18 18:45:10 31TA5620 0210 Disc Changer Error Messages (Models with navigation system) The chart on the right explains the error messages you may see in the center display while playing a disc. Error Message HEAT ERROR The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc.
09/05/18 18:45:24 31TA5620 0211 Protecting Your Discs General Information When using CD-R or CD-RW discs, use only high quality discs labeled for audio use. When recording a CD-R or CD-RW, the recording must be closed for it to be used by the disc changer. Play only standard, round, 5-inch (12 cm) discs. Smaller or oddshaped discs may jam in the drive or cause other problems. Handle your discs properly to prevent damage and skipping. Do not use discs with adhesive labels.
09/05/18 18:45:38 31TA5620 0212 Protecting Your Discs Examples of these discs are shown to the right: 1. Bubbled, wrinkled, labeled, and excessively thick discs Bubbled/ Wrinkled With Label/ Sticker Using Printer Label Kit 2. Damaged discs Chipped/ Cracked Sealed With Plastic Ring 3. Poor quality discs Warped Burrs CONTINUED 207 2010 Accord Sedan Features Additional Information on Recommended Discs The in-dash disc player/changer has a sophisticated and delicate mechanism.
09/05/18 18:45:52 31TA5620 0213 Protecting Your Discs 4. Small, irregular shaped discs 3-inch (8-cm) CD 5. Discs with scratches, dirty discs Triangle Shape Fingerprints, scratches, etc. Recommended discs are printed with the following logo. Audio unit may not play the following formats. CD-R or CD-RW may not play due to the recording conditions. Scratches and fingerprints on the discs may cause the sound to skip. This audio unit cannot play a Dualdisc .
09/05/18 18:46:03 31TA5620 0214 FM/AM Radio Reception FM/AM Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
09/05/18 18:46:11 31TA5620 0215 FM/AM Radio Reception As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter.
09/05/18 18:46:20 31TA5620 0216 Remote Audio Controls MODE BUTTON CH BUTTON Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. The MODE button changes the mode. Pressing the button repeatedly selects FM1, FM2, AM, or disc (if a disc(s) is loaded). On models with XM Radio, you can also select XM1 and XM2. If you are listening to the radio, use the CH button to change stations.
09/05/18 18:46:28 31TA5620 0217 Remote Audio Controls, Auxiliary Input Jack In MP3 or WMA mode, you can use the skip function to select folders. Press and hold the top (+) of the CH button until you hear a beep, to skip forward to the first file of the next folder. Press the bottom (−) to skip backward to the previous folder.
09/05/18 18:46:36 31TA5620 0218 Radio Theft Protection Except LX and LX-P You should have received a radio code card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual. If you lose the card, you must obtain the code number from your dealer. To do this, you will need the audio system’s serial number.
09/05/18 18:46:48 31TA5620 0219 Setting the Clock On models without navigation system To set the time, press the CLOCK button until you hear a beep. The displayed time begins to blink. On models without navigation system Change the hours by pressing the H (hour) button until the numbers advance to the desired time. Change the minutes by pressing the M (minute) button until the numbers advance to the desired time.
09/05/18 18:47:00 31TA5620 0220 Setting the Clock EX, EX-L and V6 models without navigation system Adjusting the Clock with MENU Button Features You can also adjust the clock and switch the clock display between 24hours and 12-hours in the menu mode. To adjust the clock setting: 1. Press and release the MENU button. The display shows you the menu items. You can adjust the clock setting with the ignition switch in the ACCESSORY (I) or ON (II) position. 2.
09/05/18 18:47:16 31TA5620 0221 Setting the Clock MINUTE SETTING 5. Turn the selector knob to change the setting between 12H and 24H. 8. Turn the selector knob to count the numbers up or down. 6. Press the selector knob (ENTER) to enter your selection. The display will return to the clock adjusting display. 9. Press the selector knob (ENTER) to enter your selection. The display will return to the clock adjusting display. 7.
09/05/18 18:47:25 31TA5620 0222 Security System Except LX The security system automatically sets 15 seconds after you lock the doors, hood, and trunk. For the system to activate, you must lock the doors from the outside with the key, driver’s lock tab, door lock master switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.
09/05/18 18:47:29 31TA5620 0223 Security System NOTE: Use the remote transmitter to quickly check that the hood, the trunk, and all doors are closed. Push the lock button twice within 5 seconds. There should be an audible confirmation beep. Do not attempt to alter this system or add other devices to it.
09/05/18 18:47:42 31TA5620 0224 Compass EX-L and EX-L V6 without navigation system When you turn the ignition switch to the ON (II) position, the compass is self-calibrating, then the compass display is shown in the display. Features Compass Operation Compass operation can be affected by driving near power lines or stations, across bridges, through tunnels, over railroad crossings, past large vehicles, or driving near large objects that can cause a magnetic disturbance.
09/05/18 18:47:52 31TA5620 0225 Compass 5. Press the selector knob (ENTER). The compass display is blinking and the CAL indicator is shown. 6. Drive the vehicle slowly in two complete circles. When the calibration is successfully completed, the CAL indicator goes off and the compass display will stop blinking and show an actual heading. 3. Turn the selector knob to select ‘‘CALIBRATION.’’ 4. Press the selector knob (ENTER) to enter your selection. The display shows you ‘‘PUSH CAL START.
09/05/18 18:48:04 31TA5620 0226 Compass Compass Zone Selection In most areas, there is a variation between magnetic north and true north. Zone selection is required so the compass can compensate for this variation. To check and select the zone, do this: Features 1. Turn the ignition switch to the ON (II) position. ZONE NUMBER 2. Press and hold the MENU button for about 5 seconds until you hear a beep. The display shows you the compass setting menu items. 3. Turn the selector knob to select ‘‘ZONE.
09/05/18 18:48:08 31TA5620 0227 Compass The audio system is not related to the compass system. Even if the compass system is in the zone setting mode, the display returns to the normal display which you last selected.
09/07/08 21:40:09 31TA5620_228 Cruise Control Improper use of the cruise control can lead to a crash. Use the cruise control only when traveling on open highways in good weather. Using the Cruise Control CRUISE BUTTON RES/ ACCEL BUTTON 3. Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.
09/05/18 18:48:31 31TA5620 0229 Cruise Control Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on. Changing the Set Speed You can increase the set cruising speed in any of these ways: Press and hold the RES/ACCEL button.
09/05/18 18:48:41 31TA5620 0230 Cruise Control Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed. Tap the brake or clutch pedal. Push the CANCEL button on the steering wheel. Push the CRUISE button on the steering wheel.
09/05/18 18:48:49 31TA5620 0231 HomeLink Universal Transceiver EX-L V6 The HomeLink universal transceiver built into your vehicle can be programmed to operate up to three remotely controlled devices around your home, such as garage doors, lighting, or home security systems. General Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ‘‘electronic eye,’’ or other safety and reverse stop features.
09/05/18 18:48:58 31TA5620 0232 HomeLink Universal Transceiver Training HomeLink Before you begin − If you just received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink transceiver for about 10−20 seconds, until the red indicator flashes. Release the buttons, then proceed to step 1.
09/05/18 18:49:17 31TA5620 0233 HomeLink Universal Transceiver If you are training the second or third buttons, go directly to step 1.
09/05/18 18:49:23 31TA5620 0234 HomeLink Universal Transceiver HomeLink is a registered trademark of Johnson Controls, Inc. Features As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
09/05/18 18:49:35 31TA5620 0235 Bluetooth HandsFreeLink If equipped Bluetooth HandsFreeLink (HFL) Using HFL HFL Buttons allows you to place and receive phone calls using voice commands, without handling your cell phone. To use HFL, you need a Bluetoothcompatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: In the U.S., visit handsfreelink.honda. com or call (888) 528-7876. In Canada, visit www.honda.ca, or call (888) 9-HONDA-9.
09/05/18 18:49:46 31TA5620 0236 Bluetooth HandsFreeLink Voice Control Tips Many commands can be spoken together. For example, you can say ‘‘Call 123-456-7890’’ or ‘‘Dial Peter.’’ Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted. When HFL is in use, navigation voice commands cannot be recognized. To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.
09/05/18 18:49:58 31TA5620 0237 Bluetooth HandsFreeLink Help Features To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.’’ Information Display BLUETOOTH INDICATOR For help at any time, including a list of available commands, say ‘‘Hands free help.’’ PHONE NUMBER BLUETOOTH INDICATOR U.S. model with navigation system is shown.
09/05/18 18:50:08 31TA5620 0238 Bluetooth HandsFreeLink How to Use HFL The ignition switch must be in the ACCESSORY (I) or ON (II) position.
09/05/18 18:50:16 31TA5620 0239 Bluetooth HandsFreeLink ‘‘Redial’’ Redial the last number called (See page 240) ‘‘Transfer’’ Transfer a call from HFL to your phone, or from your phone to HFL (See page 242) ‘‘Mute’’ Mute your voice to the person at the other end of the call (See page 243) ‘‘Send’’ Send numbers or names during a call (See page 243) Press HFL Talk button ‘‘Phonebook’’ ‘‘Store’’ Store a phonebook entry (See page 244) ‘‘Edit’’ Edit the number of an existing phonebook entry (See
09/05/18 18:50:22 31TA5620 0240 Bluetooth HandsFreeLink Apply a security passcode to the system that must be input at each key cycle to access the system (See page 250) ‘‘Security’’ Change your security passcode (See page 251) ‘‘Call Notification’’ Set how you would like to be notified of an incoming call (See page 251) ‘‘Auto Transfer’’ Press HFL Talk button ‘‘Clear’’ Set calls to automatically transfer from your phone to HFL when you enter the vehicle (See page 251) Clear the system of all pai
09/05/18 18:50:36 31TA5620 0241 Bluetooth HandsFreeLink To use HFL, you need to pair your Bluetooth-compatible cell phone to the system. Phone Setup This command group is available for paired cell phones. Phone pairing tips You cannot pair your phone while the vehicle is moving. Your phone must be in discovery or search mode to pair. Refer to your phone’s manual. Up to six phones can be paired. Your phone’s battery may drain faster when it is paired to HFL.
09/05/18 18:50:51 31TA5620 0242 Bluetooth HandsFreeLink To rename a paired phone: To delete a paired phone: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command. 1. Say ‘‘Phone setup.’’ 1. Say ‘‘Phone setup.’’ 2. Say ‘‘Edit ’’ after the prompts. 2. Say ‘‘Delete’’ after the prompts. 3. If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.
09/05/18 18:51:09 31TA5620 0243 Bluetooth HandsFreeLink To hear which paired phone is currently linked: To change from the currently linked phone to another paired phone: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command. 1. Say ‘‘Phone setup.’’ 1. Say ‘‘Phone setup.’’ 2. Say ‘‘Status’’ after the prompts. 2. Say ‘‘Next phone’’ after the prompts.
09/05/18 18:51:24 31TA5620 0244 Bluetooth HandsFreeLink Making a Call You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called. During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery. To make a call using a name in the HFL phonebook: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command.
09/05/18 18:51:36 31TA5620 0245 Bluetooth HandsFreeLink To redial the last number called by HFL: To make a call from an imported phonebook: Press and release the HFL Talk button and say ‘‘Redial.’’ On models with navigation system 1. Press the INFO button, then select ‘‘Cellular Phonebook .’’ 2. Select ‘‘Search Imported Phonebook .’’ 240 2010 Accord Sedan 3. Select a phonebook you want to choose a phone number from.
09/05/18 18:51:45 31TA5620 0246 Bluetooth HandsFreeLink Selecting ‘‘Store in HandsFreeLink,’’ the phone number will be stored in HFL, so that you can call it using HFL’s name tag by voice. Push up the interface selector to show a list. Features To search for a specific name in the phonebook, enter the keyword for either the first or last name. 4. Select the name. All the phone numbers stored for that name will be listed. To display all names in the phonebook, select the ‘‘List ’’ option. 5.
09/05/18 18:51:55 31TA5620 0247 Bluetooth HandsFreeLink Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the HFL Back button to hang up. Call Waiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call. To return to the original call, press the HFL Talk button again.
09/05/18 18:52:11 31TA5620 0248 Bluetooth HandsFreeLink Muting a Call You can mute your voice to the person you are talking to during a call. To unmute your voice, press and release the HFL Talk button and say ‘‘Mute’’ again. To send a name or number during a call: Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store cannot only be phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.
09/05/18 18:52:28 31TA5620 0249 Bluetooth HandsFreeLink To store a phonebook entry: Press and release the HFL Talk button before a command. 1. Say ‘‘Phonebook .’’ NOTE: Avoid using duplicate name entries. Avoid using ‘‘home’’ as a name entry. 4. Say the number you want to store for the name entry. 1. Say ‘‘Phonebook .’’ 2. Say ‘‘Edit ’’ after the prompts. 2. Say ‘‘Store’’ after the prompts. 3. Say a name you want to list as your phonebook entry.
09/05/18 18:52:46 31TA5620 0250 Bluetooth HandsFreeLink To list all names in the phonebook: Press and release the HFL Talk button before a command. 1. Say ‘‘Phonebook .’’ 1. Say ‘‘Phonebook .’’ 2. Say ‘‘Delete’’ after the prompts. 2. Say ‘‘List ’’ after the prompts. 3. Say the name you want to delete and follow the HFL prompts to complete the deletion. 3. HFL begins reading the names in the order they were stored.
09/05/18 18:53:02 31TA5620 0251 Bluetooth HandsFreeLink Cellular Phonebook Import Cellular Phonebook: Search Imported Phonebook: (available on some phones) The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system. Once a phonebook has been imported, you can search the phone numbers by the person’s name. On models with navigation system If you select Cellular Phonebook from the Information screen menu, you will see four HFL options.
09/05/18 18:53:19 31TA5620 0252 Bluetooth HandsFreeLink Push up the interface selector to show a list. To search for a specific name in the phonebook, enter the keyword for either the first or last name. To display all names in the phonebook, select the ‘‘List ’’ option. Preference Fax Home Car Mobile Voice Work Other Features If the phonebook is PIN-protected, you will need to enter the 4-digit PIN. Select a person from the list.
09/05/18 18:53:31 31TA5620 0253 Bluetooth HandsFreeLink Delete Imported Phonebook: You can delete any imported phonebook. After making a selection, the following screen will appear. PIN Number You can add, change, or remove a PIN number from any phonebook. Select ‘‘Delete Imported Phonebook ,’’ and a list of imported phonebooks will be displayed. Select a phonebook you want to delete. If the phonebook is PINprotected, you will need to enter the 4-digit PIN number.
09/05/18 18:53:41 31TA5620 0254 Bluetooth HandsFreeLink To change the PIN to a new number: To remove a PIN: Select ‘‘PIN number,’’ then select ‘‘Do not use PIN’’ after you enter the current PIN. Features Select the phonebook you want. The display will change as shown above. The display will change as shown above. Enter the current PIN for this phonebook. Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.
09/05/18 18:53:50 31TA5620 0255 Bluetooth HandsFreeLink System Setup This command group allows you to change or customize HFL basic settings. To set a 4-digit passcode to lock the HFL system for security purposes: Press and release the HFL Talk button before a command. 1. Say ‘‘System setup.’’ 2. Say ‘‘Security’’after the prompts. 3. Follow the HFL prompts and say the 4-digit passcode you want to set. 4. Follow the HFL prompts to confirm the number.
09/05/18 18:54:08 31TA5620 0256 Bluetooth HandsFreeLink Press and release the HFL Talk button before a command. To change your security pass code: To select either a ring tone or a prompt as the incoming call notification*: 1. Say ‘‘System setup.’’ Press and release the HFL Talk button before a command. 3. Follow the HFL prompts and say the new 4-digit passcode. 4. Follow the HFL prompts to confirm the number. 1. Say ‘‘System setup.
09/05/18 18:54:25 31TA5620 0257 Bluetooth HandsFreeLink To clear the system: Quick Language Selection Change Language This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data. Canadian models only To quickly change the language: Press and release the HFL Talk button before a command. Canadian models only To change the system language between English and French: Press and release the HFL Talk button before a command. 1.
09/05/18 18:54:33 31TA5620 0258 Bluetooth HandsFreeLink As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Features Bluetooth Wireless Technology The Bluetooth name and logos are registered trademarks owned by Bluetooth SIG, Inc.
09/05/18 18:54:36 31TA5620 0259 254 2010 Accord Sedan
09/05/18 18:54:40 31TA5620 0260 Before Driving Break-in Period .............................. 256 Fuel Recommendation .................. 256 Service Station Procedures .......... 257 Refueling..................................... 257 Check Fuel Cap Message ......... 258 Opening and Closing the Hood ................................. 260 Oil Check .................................... 262 Engine Coolant Check .............. 263 Fuel Economy ................................
09/05/18 18:54:53 31TA5620 0261 Break-in Period, Fuel Recommendation Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Do not change the oil until the scheduled maintenance time. Avoid hard braking for the first 200 miles (300 km).
09/07/08 21:40:18 31TA5620_262 Fuel Recommendation, Service Station Procedures Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume and up to 15% MTBE by volume. Do not use gasoline containing methanol. Refueling Push 1. Park with the driver’s side closest to the service station pump. 2. To open the fuel fill door, push down on the lever located to the left of the driver’s seat.
09/05/18 18:55:14 31TA5620 0263 Service Station Procedures 3. Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door. 4. Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes. 5.
09/05/18 18:55:19 31TA5620 0264 Service Station Procedures Turn the engine off, and confirm the fuel fill cap is installed. If it is, loosen it, then retighten it until it clicks at least once. The message should go off after several days of normal driving once you tighten or replace the fuel fill cap. To scroll to another display, press the select/reset knob. Before Driving The ‘‘CHECK FUEL CAP’’ message will appear each time you restart the engine until the system turns the message off.
09/05/18 18:55:26 31TA5620 0265 Service Station Procedures Opening and Closing the Hood HOOD RELEASE HANDLE 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. LATCH 2. Reach in between the hood and the front grille with your fingers. The hood latch handle is above the ‘‘H’’ logo. Push this handle up until it releases the hood. Lift the hood.
09/05/18 18:55:35 31TA5620 0266 Service Station Procedures GRIP SUPPORT ROD To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched. Before Driving CLIP 4-cylinder models V6 models 3. 4-cylinder models Holding the grip, pull the support rod out of its clip.
09/05/18 18:55:45 31TA5620 0267 Service Station Procedures Oil Check UPPER MARK LOWER MARK 4-cylinder models DIPSTICK (orange handle) V6 models DIPSTICK (orange loop) Wait a few minutes after turning the engine off before you check the oil. 2. Wipe off the dipstick with a clean cloth or paper towel. 1. Remove the dipstick (orange handle/loop). 3. Insert the dipstick all the way back into its hole. 4-cylinder models 4. Remove the dipstick again, and check the level.
09/05/18 18:55:55 31TA5620 0268 Service Station Procedures Engine Coolant Check MAX RESERVE TANK 4-cylinder models MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 316 for information on adding the proper coolant. V6 models MIN Refer to Owner’s Maintenance Checks on page 308 for information about checking other items on your vehicle.
09/05/18 18:56:06 31TA5620 0269 Fuel Economy Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle.
09/05/18 18:56:22 31TA5620 0270 Fuel Economy Use the recommended viscosity motor oil, displaying the API Certification Seal (see page 313). Maintain proper tire inflation − An underinflated tire increases ‘‘rolling resistance,’’ which reduces fuel economy. Avoid carrying excess weight in your vehicle − It puts a heavier load on the engine, increasing fuel consumption. Drive Efficiently Drive moderately − Rapid acceleration, abrupt cornering, and hard braking increase fuel consumption.
09/05/18 18:56:34 31TA5620 0271 Fuel Economy Minimize the use of the air conditioning system − The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. Plan and combine trips − Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.
09/07/08 21:40:27 31TA5620_272 Accessories and Modifications Modifying your vehicle, or installing some non-Honda accessories, can make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability.
09/05/18 18:56:56 31TA5620 0273 Accessories and Modifications Modifying Your Vehicle Removing parts from your vehicle, or replacing components, with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability. Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components, and are not compatible with the tire pressure monitoring system (TPMS).
09/05/18 18:57:06 31TA5620 0274 Carrying Cargo CONSOLE COMPARTMENT CENTER POCKETS DOOR POCKETS Your vehicle has several convenient storage areas: However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
09/07/08 21:40:38 31TA5620_275 Carrying Cargo Load Limits The maximum load for your vehicle is 850 lbs (385 kg). See Tire And Loading Information label attached to the driver’s doorjamb. Label Example This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer. Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.
09/05/18 18:57:25 31TA5620 0276 Carrying Cargo Example 1 Max Load (850 lbs) Passenger Weight (150 lbs x 2 = 300 lbs) Cargo Weight (550 lbs) Max Load (850 lbs) Passenger Weight (150 lbs x 4 = 600 lbs) Cargo Weight (250 lbs) Max Load (850 lbs) Passenger Weight (150 lbs x 5 = 750 lbs) Cargo Weight (100 lbs) In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating
09/05/18 18:57:36 31TA5620 0277 Carrying Cargo Carrying Items in the Passenger Compartment Store or secure all items that could be thrown around and hurt someone during a crash. Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop. Do not put any items on top of the trunk panel. They can block your view and be thrown around the vehicle during a crash.
09/05/18 18:57:42 31TA5620 0278 Carrying Cargo If you carry any items on a roof rack, be sure the total weight of the rack and the items does not exceed the maximum allowable weight. Cargo Net Optional The cargo net can be used to help hold down items stored in the trunk. Before Driving If you use an accessory roof rack, the roof rack weight limit may be lower. Refer to the information that came with your roof rack.
09/05/18 18:57:45 31TA5620 0279 274 2010 Accord Sedan
09/05/18 18:57:50 31TA5620 0280 Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer. 275 2010 Accord Sedan Driving Preparing to Drive ......................... 276 Starting the Engine.
09/05/18 18:58:05 31TA5620 0281 Preparing to Drive You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 6. On models with power adjustable seats Check the seat adjustment (see page 92 ). On models with manual adjustable seats Check the seat adjustment (see page 93 ). 2. Check that the hood is fully closed. 3. Check that the trunk is fully closed. 4.
09/05/18 18:58:15 31TA5620 0282 Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. Make sure the shift lever is in Park. Press on the brake pedal. The engine is harder to start in cold weather.
09/07/08 21:41:32 31TA5620_283 Manual Transmission When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster. The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse. Come to a full stop before you shift into reverse.
09/05/18 18:58:31 31TA5620 0284 Manual Transmission Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control. The following shift points are recommended: Normal acceleration 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 15 mph (24 km/h) 28 mph (45 km/h) 41 mph (66 km/h) 52 mph (84 km/h) Before downshifting, make sure the engine will not go into the tachometer’s red zone.
09/05/18 18:58:41 31TA5620 0285 Automatic Transmission Shift Lever Position Indicators The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system.
09/05/18 18:58:49 31TA5620 0286 Automatic Transmission To shift from: P to R Press the shift lever release button. Move the shift lever. Park (P) − This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.
09/05/18 18:59:00 31TA5620 0287 Automatic Transmission Drive (D) − Use this position for your normal driving. The transmission automatically selects a suitable gear (1 through 5) for your speed and acceleration. You may notice the transmission shifting up at higher engine speeds when the engine is cold. This helps the engine warm up faster. Second (2) − To shift to second, press the release button on the front of the shift lever. This position locks the transmission in second gear.
09/05/18 18:59:12 31TA5620 0288 Automatic Transmission Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.
09/05/18 18:59:18 31TA5620 0289 Automatic Transmission RELEASE BUTTON 6. Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the right side. Press the brake pedal, and restart the engine. If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer. SHIFT LOCK RELEASE SLOT 5.
09/05/18 18:59:31 31TA5620 0290 Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. Parking Tips Make sure the moonroof (if equipped) and the windows are closed. Turn off the lights. Place any packages, valuables, etc., in the trunk or take them with you. Lock the doors. Except LX Check the indicator on the instrument panel to verify that the security system is set.
09/05/18 18:59:40 31TA5620 0291 Braking System Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The emergency brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.
09/05/18 18:59:50 31TA5620 0292 Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. ABS Indicator If this indicator comes on, the antilock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.
09/05/18 19:00:00 31TA5620 0293 Anti-lock Brakes (ABS) If the ABS indicator and the brake system indicator come on together, and the parking brake is fully released, the EBD system may also be shut down. Test your brakes as instructed on page 367 . If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.
09/05/18 19:00:13 31TA5620 0294 Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output and by selectively applying the brakes.
09/05/18 19:00:23 31TA5620 0295 Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System VSA OFF Switch VSA OFF SWITCH This switch is under the driver’s side vent. To turn the VSA system on and off, press and hold it until you hear a beep. When VSA is off, the VSA activation indicator comes on as a reminder. Press and hold the switch again. It turns the system back on.
09/05/18 19:00:35 31TA5620 0296 Tire Pressure Monitoring System (TPMS) Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving. If you think you can safely drive a short distance to a service station, proceed slowly, and inflate the tire to the recommended pressure shown on the driver’s doorjamb.
09/05/18 19:00:45 31TA5620 0297 Tire Pressure Monitoring System (TPMS) For example, if you check and fill your tires in a warm area, then drive in extremely cold weather, the tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on. Or, if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions, the tire may become overinflated.
09/05/18 19:00:55 31TA5620 0298 Tire Pressure Monitoring System (TPMS) Changing a Tire with TPMS If you have a flat tire, the low tire pressure indicator will come on. Replace the flat tire with the compact spare tire (see page 352 ). Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor. Have the flat tire repaired by your dealer as soon as possible.
09/07/08 21:41:38 31TA5620_299 Towing a Trailer Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section. Break-In Period Avoid towing a trailer during your vehicle’s first 600 miles (1,000 km) (see page 256 ).
09/05/18 19:01:13 31TA5620 0300 Towing a Trailer To achieve a proper tongue load, start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed. Canadian models LX and LX-P: 1,970 kg EX and EX-L: 2,030 kg V6 models: 2,090 kg Driving Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load is: U.S.
09/05/18 19:01:27 31TA5620 0301 Towing a Trailer Gross Axle Weight Rating (GAWR): The maximum allowable weight at the vehicle axles is: U.S.
09/05/18 19:01:40 31TA5620 0302 Towing a Trailer Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow. Trailer Brakes There are two common types of trailer brakes: surge and electric. Surge brakes are common for boat trailers, since the brakes will get wet. Safety Chains Always use safety chains when you tow a trailer.
09/05/18 19:01:52 31TA5620 0303 Towing a Trailer Trailer Lights Additional Towing Equipment Trailer lights and equipment must comply with federal, state, province, territory, and local regulations. Check with your local trailer sales or rental agencies for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle. Many states and Canadian provinces/territories require special outside mirrors when towing a trailer.
09/05/18 19:02:05 31TA5620 0304 Towing a Trailer The lights and brakes on your vehicle and the trailer are working properly. Your vehicle tires and spare are properly inflated, and the trailer tires and spare are inflated as recommended by the trailer maker. Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques.
09/05/18 19:02:16 31TA5620 0305 Towing a Trailer When driving down hills, reduce your speed, and shift down to second gear. Do not ‘‘ride’’ the brakes, and remember, it will take longer to slow down and stop when towing a trailer. If you must stop when facing uphill, use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.
09/05/18 19:02:22 31TA5620 0306 Maintenance This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.
09/07/08 21:41:48 31TA5620_307 Maintenance Safety All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
09/05/18 19:02:47 31TA5620 0308 Maintenance Minder Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service. Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage. Engine Oil Life Display SELECT/RESET KNOB ENGINE OIL LIFE INDICATOR U.S. model is shown.
09/05/18 19:02:55 31TA5620 0309 Maintenance Minder MAINTENANCE MINDER INDICATOR ENGINE OIL LIFE INDICATOR MAINTENANCE ITEM CODE(S) U.S. model is shown. If the remaining engine oil life is 15 to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position.
09/05/18 19:03:07 31TA5620 0310 Maintenance Minder The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page 309 ). You can switch the information display from the engine oil life display to the odometer or the trip meter. Press and release the select/ reset knob on the instrument panel. When you see this message, have the indicated maintenance performed by your dealer as soon as possible.
09/05/18 19:03:18 31TA5620 0311 Maintenance Minder To change the information display from the engine oil life display to the odometer or the trip meter, press and release the select/reset knob. Maintenance Main Items and Sub Items MAINTENANCE MINDER INDICATOR MAINTENANCE MAIN ITEM When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ( ) remains on even if you change the information display.
09/05/18 19:03:28 31TA5620 0312 Maintenance Minder Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed. 4. Press the select/reset knob for another 5 seconds.
09/05/18 19:03:40 31TA5620 0313 Maintenance Minder However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log.
09/05/18 19:03:50 31TA5620 0314 Maintenance Minder Symbol A B 3 4 If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year. # : See information on maintenance and emissions warranty in the center column on page 308 . NOTE: Independent of the maintenance messages in the information display, replace the brake fluid every 3 years.
09/05/18 19:03:54 31TA5620 0315 Fluid Locations 4-cylinder models BRAKE FLUID (Black cap) CLUTCH FLUID (Manual Transmission only) (Light gray cap) ENGINE OIL DIPSTICK (Orange handle) ENGINE OIL FILL CAP POWER STEERING FLUID (Red cap) AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR RADIATOR CAP 310 2010 Accord Sedan
09/05/18 19:04:00 31TA5620 0316 Fluid Locations V6 models ENGINE OIL FILL CAP ENGINE OIL DIPSTICK (Orange loop) BRAKE FLUID (Black cap) Maintenance AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) POWER STEERING FLUID (Red cap) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR RADIATOR CAP 311 2010 Accord Sedan
09/05/18 19:04:07 31TA5620 0317 Adding Engine Oil ENGINE OIL FILL CAP 4-cylinder models Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment. ENGINE OIL FILL CAP V6 models Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick.
09/05/18 19:04:17 31TA5620 0318 Adding Engine Oil Honda Motor Oil is the preferred 5W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’ The oil viscosity or weight is provided on the container’s label. 5W-20 oil is formulated for yearround protection of your vehicle to improve cold weather starting and fuel economy.
09/05/18 19:04:28 31TA5620 0319 Changing the Engine Oil and Filter Always change the oil and filter according to the maintenance messages shown on the information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service.
09/05/18 19:04:41 31TA5620 0320 Changing the Engine Oil and Filter OIL FILTER OIL FILTER 7. Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5 seconds. If it does not, turn off the engine, and check your work. 8. Let the engine run for several minutes, then check the drain bolt and oil filter for leaks. 4-cylinder models 5. Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 29 lbf·ft (39 N·m , 4.
09/05/18 19:04:49 31TA5620 0321 Engine Coolant Adding Engine Coolant 4-cylinder models RESERVE TANK If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. V6 models RESERVE TANK Always use Honda Long-life Antifreeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.
09/07/08 21:41:58 31TA5620_322 Engine Coolant If the reserve tank is completely empty, you should also check the coolant level in the radiator. RADIATOR CAP Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. 1. Make sure the engine and radiator are cool. 2. Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down. 3. Remove the radiator cap by pushing it down and turning it counterclockwise.
09/05/18 19:05:13 31TA5620 0323 Windshield Washers LEVEL GAUGE LEVEL GAUGE Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid. 4-cylinder models Check the level in the windshield washer reservoir at least monthly during normal use.
09/05/18 19:05:23 31TA5620 0324 Transmission Fluid Automatic Transmission DIPSTICK DIPSTICK UPPER MARK LOWER MARK 4-cylinder models 2. Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth. 4-cylinder models 3. Insert the dipstick all the way into the transmission securely as shown in the illustration. 1. Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine.
09/05/18 19:05:36 31TA5620 0325 Transmission Fluid Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. UPPER MARK LOWER MARK V6 models Always use Honda Genuine ATF-Z1 (automatic transmission fluid). 6. Insert the dipstick all the way back into the transmission securely as shown in the illustration. 4. Remove the dipstick and check the fluid level. It should be between the upper and lower marks.
09/05/18 19:05:49 31TA5620 0326 Transmission Fluid Manual Transmission FILLER BOLT CLIP UNDER COVER To check the transmission fluid level, remove the under cover holding clips with a flat-tip screwdriver, then remove the under cover carefully. Remove the transmission filler bolt, and carefully feel inside the bolt hole with your finger. The fluid level should be up to the edge of the bolt hole. If it is not, add Honda Manual Transmission Fluid (MTF) until it starts to run out of the hole.
09/05/18 19:05:59 31TA5620 0327 Brake and Clutch Fluid Check the fluid level in the reservoirs monthly. There are up to two reservoirs, depending on the model. They are: Brake fluid reservoir (all models) Clutch fluid reservoir (manual transmission only) Independent of the maintenance minder display, replace the brake fluid every 3 years. Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement.
09/05/18 19:06:08 31TA5620 0328 Brake and Clutch Fluid, Power Steering Fluid Clutch Fluid On models with manual transmission A low fluid level can indicate a leak in the clutch system. Have this system inspected as soon as possible. Power Steering Fluid UPPER LEVEL MAX 4-cylinder models LOWER LEVEL Check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL.
09/05/18 19:06:19 31TA5620 0329 Power Steering Fluid, Timing Belt UPPER LEVEL Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible. A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.
09/05/18 19:06:29 31TA5620 0330 Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects.
09/05/18 19:06:38 31TA5620 0331 Lights FASTENER V6 models STAY V6 models BULB AIR INTAKE COVER DUCT V6 models To change a bulb on the driver’s side, undo the fastener and remove the air intake cover and duct. TAB 2. Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb. 3. Remove the bulb by turning it approximately one-quarter turn counterclockwise.
09/05/18 19:06:52 31TA5620 0332 Lights 4. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. Low Beam Headlight HOLDING CLIPS BULB 5. Push the electrical connector onto the bulb. 6. Turn on the headlights to test the new bulb. Passenger’s side Reinstall the engine coolant reserve tank. 1. To change the passenger’s side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine.
09/05/18 19:07:04 31TA5620 0333 Lights 6. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. Replacing a Front Turn Signal/ Parking Light Bulb 7. Push the electrical connector onto the bulb. 8. Turn on the headlights to test the new bulb. 9. Put the inner fender cover in place. Install the two holding clips. Lock each one in place by pushing on the center. V6 model is shown. STAY 1. Open the hood.
09/05/18 19:07:18 31TA5620 0334 Lights 4. Install the new bulb and turn it clockwise to lock it in place. Replacing a Front Side Marker Light Bulb 5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. HOLDING CLIPS BULB 6. Turn on the lights to make sure the new bulb is working. 7. Passenger’s side Reinstall the coolant reserve tank. 2. Use a flat-tip screwdriver to remove the two holding clips from the inner fender. 3.
09/05/18 19:07:32 31TA5620 0335 Lights 5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. Replacing Rear Bulbs BULB SOCKET 6. Turn on the lights to make sure the new bulb is working. 7. Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers. SCREW 1. Open the trunk. Remove the screw in the center of the fastener on the side of the trunk lining. Pull the lining back. 2.
09/05/18 19:07:42 31TA5620 0336 Lights 6. Turn on the lights to make sure the new bulb is working. Replacing a High-mount Brake Light Bulb 7. Push the trunk lid trim back into position. 3. Reinstall the socket. Turn it clockwise until it locks. Make sure the new bulb is working. BULB Rear License Plate Light Bulbs The license plate has two lights above it. The bulbs should be replaced by your dealer. 8. Put the fastener into the hole on the side of the trunk lining. Reinstall the screw.
09/05/18 19:07:53 31TA5620 0337 Lights Replacing a Fog Light Bulb If equipped Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. FASTENERS Halogen light bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
09/05/18 19:08:06 31TA5620 0338 Lights 8. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. HOLDING CLIPS 9. Push the electrical connector back onto the bulb. Make sure it is on all the way. TAB ELECTRICAL CONNECTOR 5. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. 6. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 7.
09/05/18 19:08:15 31TA5620 0339 Cleaning the Seat Belts, Floor Mats Cleaning the Seat Belts OPENING Dirt build-up around the openings of the seat belt anchors can cause the belts to retract slowly. Wipe the openings with a clean cloth dampened in mild soap and warm water or isopropyl alcohol. If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle.
09/05/18 19:08:22 31TA5620 0340 Floor Mats, Dust and Pollen Filter If you remove a floor mat, make sure to re-anchor it when you put it back in your vehicle. If you use a non-Honda floor mat, make sure it fits properly and that it can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mat. Have your dealer replace this filter when this service is indicated by a maintenance message on the information display.
09/05/18 19:08:31 31TA5620 0341 Wiper Blades Check the condition of the wiper blades at least every six months. Replace them if you find signs of cracking in the rubber, areas that are getting hard, or if they leave streaks and unwiped areas when used. WIPER ARMS LOCK TAB To replace a wiper blade: 1. Raise the wiper arm off the windshield. Raise the driver’s side first, then the passenger’s side. Do not open the hood when the wiper arms are raised, or you will damage the hood and wiper arms.
09/05/18 19:08:42 31TA5620 0342 Wiper Blades WIPER ARM 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. BLADE REINFORCEMENT BLADE TOP 3. Remove the blade from its holder by grabbing the tabbed end of the blade. Pull firmly until the tabs come out of the holder.
09/05/18 19:08:49 31TA5620 0343 Wiper Blades 6. Slide the wiper blade assembly onto the wiper arm. Push down the lock tab. Make sure the wiper blade assembly locks in place. TAB 7. Lower the wiper arm down against the windshield, the passenger’s side first, then the driver’s side. INDENT 5. Place the top of the wiper blade on the end of the blade assembly, and slide the blade onto the assembly in the direction pointed to by the arrow.
09/07/08 21:42:08 31TA5620_344 Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced. Follow all instructions in this owner’s manual regarding tire inflation and maintenance.
09/05/18 19:09:16 31TA5620 0345 Tires If you check air pressures when the tires are hot (driven for several miles/kilometers), you will see readings 4 to 6 psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm ) higher than the cold readings. This is normal. Do not let air out to match the recommended cold air pressure. The tire will be underinflated. You should get your own tire pressure gauge and use it whenever you check your tire pressures.
09/05/18 19:09:30 31TA5620 0346 Tires High Speed Driving V6 models only We strongly recommend that you do not drive faster than the posted speed limits and conditions allow. If you ever drive in a sanctioned competitive event at sustained high speeds (over 118 mph or 190 km/h), be sure to adjust the cold tire pressures as shown below. If you do not, excessive heat can build up and cause sudden tire failure. Cold Tire Pressure 35 psi (240 kPa , 2.
09/05/18 19:09:39 31TA5620 0347 Tires Tire Service Life The service life of your tires is dependent on many factors, including, but not limited to, driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use). The last four digits of the TIN (tire identification number) are found on the sidewall of the tire and indicate the date of manufacture (See Tire Labeling on page 386 ).
09/05/18 19:09:47 31TA5620 0348 Tires On models with aluminum wheels Tire Rotation Front Front When the tires are rotated, make sure the air pressures are checked. Improper wheel weights can damage your vehicle’s aluminum wheels. Use only Honda wheel weights f or balancing.
09/07/08 21:42:15 31TA5620_349 Tires Replacing Tires and Wheels Replace your tires with radial tires of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). It is best to replace all four tires at the same time. If that is not possible or necessary, replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling.
09/05/18 19:10:12 31TA5620 0350 Tires Wheel and Tire Specifications Wheels LX and LX-P: 16 x 6 1/2J EX and EX-L: 17 x 7 1/2J V6 models: 17 x 7 1/2J EX and EX-L: P225/50R17 93V V6 models: P225/50R17 93V See page 384 for DOT tire quality grading information, and page 386 for tire size information. Mount tire chains on your tires when required by driving conditions or local laws. Install them only on the front tires.
09/07/08 21:43:09 31TA5620_351 Tires When installing chains, follow the manufacturer’s instructions, and mount them as tight as you can. Make sure they are not contacting the brake lines or suspension. Drive slowly with them installed. If you hear them coming into contact with the body or chassis, stop and investigate. Remove them as soon as you begin driving on cleared roads.
09/05/18 19:10:31 31TA5620 0352 Checking the Battery TEST INDICATOR WINDOW TEST INDICATOR WINDOW If additional battery maintenance is needed, see your dealer or a qualified mechanic. WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling. 4-cylinder models The location of the test indicator window varies between manufacturers. Check the terminals for corrosion (a white or yellowish powder).
09/07/08 21:43:16 31TA5620_353 Checking the Battery, Vehicle Storage The battery gives off explosive hydrogen gas during normal operation. If your vehicle’s battery is disconnected, or goes dead, the time setting may be lost. To reset the time, see page 214 . Except LX and LX-P A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you. Wear protective clothing and a face shield, or have a skilled technician do the battery maintenance.
09/05/18 19:10:50 31TA5620 0354 Vehicle Storage Leave the parking brake off. Put the transmission in reverse (manual) or Park (automatic). Support the front wiper blade arms with a folded towel or rag so they do not touch the windshield. Block the rear wheels. To minimize sticking, apply a silicone spray lubricant to all door and trunk seals. Also, apply a vehicle body wax to the painted surfaces that mate with the door and trunk seals.
09/05/18 19:10:53 31TA5620 0355 350 2010 Accord Sedan
09/05/18 19:10:58 31TA5620 0356 Taking Care of the Unexpected This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed. Compact Spare Tire....................... 352 Changing a Flat Tire .....................
09/05/18 19:11:09 31TA5620 0357 Compact Spare Tire Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Check the air pressure of the compact spare tire every time you check the other tires. It should be inflated to: 60 psi (420 kPa , 4.2 kgf/cm ) Follow these precautions: INDICATOR LOCATION MARK Never exceed 50 mph (80 km/h). This tire gives a harsher ride and less traction on some road surfaces.
09/07/08 21:43:25 31TA5620_358 Changing a Flat Tire If you have a flat tire while driving, pull over safely. Drive slowly along the shoulder until you get to an area far away from traffic lanes. TRUNK FLOOR TOOL KIT 3. The tools are in the trunk. Open the trunk and raise the trunk floor by lifting up on the back edge. The vehicle can easily roll off the jack, seriously injuring anyone underneath. SPARE TIRE JACK 1. Park the vehicle on firm, level, and non-slippery ground.
09/05/18 19:11:27 31TA5620 0359 Changing a Flat Tire JACK WHEEL NUT JACKING POINT 6. Take the jack out of the tool kit case. 7. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 354 2010 Accord Sedan 8. Place the jack under the jacking point nearest the tire you need to change. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch.
09/05/18 19:11:37 31TA5620 0360 Changing a Flat Tire WHEEL NUT WHEEL WRENCH EXTENSION 10.Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. LX Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. BRAKE HUB 11.
09/05/18 19:11:45 31TA5620 0361 Changing a Flat Tire 12.Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. 13.Lower the vehicle to the ground, and remove the jack. CENTER CAP 14.Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility.
09/07/08 21:43:36 31TA5620_362 Changing a Flat Tire WING BOLT SPACER CONE 19.Store the jack and tools in the tool kit case. Place the tool kit case in the flat tire. Loose items can fly around the interior in a crash and could seriously injure the occupants. For compact For normal spare tire tire SPACER CONE 16.Place the flat tire face down in the spare tire well.
09/05/18 19:12:09 31TA5620 0363 If the Engine Won’t Start Diagnosing why the engine won’t start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position: You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly. You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.
09/05/18 19:12:17 31TA5620 0364 If the Engine Won’t Start The Starter Operates Normally In this case, the starter motor’s speed sounds normal, or even faster than normal, when you turn the ignition switch to the START (III) position, but the engine does not run. Are you using the proper starting procedure? Refer to Starting the Engine on page 277 . There may be an electrical problem, such as no power to the fuel pump. Check all the fuses (see page 368 ).
09/07/08 21:43:44 31TA5620_365 Jump Starting Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. Keep all sparks, open flames, and smoking materials away from the battery. You cannot start your vehicle with an automatic transmission by pushing or pulling it. To jump start your vehicle: 1. Open the hood, and check the physical condition of the battery.
09/05/18 19:12:35 31TA5620 0366 Jump Starting V6 models BOOSTER BATTERY 4-cylinder models with manual transmission 4. 4-cylinder models Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the engine mounting bolt (automatic) or the transmission mounting bolt (manual), as shown. Do not connect this jumper cable to any other part of the engine. CONTINUED 361 2010 Accord Sedan Taking Care of the Unexpected 3.
09/05/18 19:12:43 31TA5620 0367 Jump Starting 5. If the booster battery is in another vehicle, have an assistant start that vehicle and run it at a fast idle. 6. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. V6 models V6 models Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the engine hanger as shown.
09/07/08 21:43:53 31TA5620_368 If the Engine Overheats The pointer of the vehicle’s temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If your vehicle overheats, you should take immediate action. The only indication may be the temperature gauge climbing to or above the red mark. Or you may see steam or spray coming from under the hood. Do not open the hood if steam is coming out. 1.
09/07/08 21:44:01 31TA5620_369 If the Engine Overheats 6. If you do not find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is below the MIN mark. 7. If there was no coolant in the reserve tank, you may need to add coolant to the radiator. Let the engine cool down until the pointer reaches the middle of the temperature gauge, or lower, before checking the radiator.
09/05/18 19:13:16 31TA5620 0370 Low Oil Pressure Indicator, Charging System Indicator 1. Safely pull off the road, and shut off the engine. Turn on the hazard warning lights. Running the engine with low oil pressure can cause serious mechanical damage almost immediately. Turn of f the engine as soon as you can saf ely get the vehicle stopped. 3. If necessary, add oil to bring the level back to the full mark on the dipstick (see page 312 ). 2. Let the vehicle sit for a minute.
09/05/18 19:13:26 31TA5620 0371 Malfunction Indicator Lamp If this indicator comes on while driving, it means one of the engine’s emissions control systems may have a problem. Even though you may feel no difference in your vehicle’s performance, it can reduce your fuel economy and cause increased emissions. Continued operation may cause serious damage. If you have recently refueled your vehicle, the indicator coming on could be due to a loose or missing fuel fill cap.
09/05/18 19:13:35 31TA5620 0372 Brake System Indicator U.S. Canada The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position, and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. However, if the brake pedal does not feel normal, you should take immediate action. A problem in one part of the system’s dual circuit design will still give you braking at two wheels.
09/05/18 19:13:44 31TA5620 0373 Fuses INTERIOR (Driver’s side) INTERIOR (Passenger’s side) UNDER-HOOD NOTCH FUSE BOX TAB FUSE LABEL The vehicle’s fuses are contained in three fuse boxes. The driver’s side interior fuse box is under the dashboard on the driver’s side. The fuse label is attached to the side panel. The passenger’s side interior fuse box is on the lower passenger’s side panel.
09/05/18 19:13:55 31TA5620 0374 Fuses Checking and Replacing Fuses If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse. Determine from the chart on pages 372 , 373 and 374 , or the diagram on the fuse box lid or the fuse label, which fuse or fuses control that component. Check those fuses first, but check all the fuses before deciding that a blown fuse is not the cause. Replace any blown fuses and check if the device works. BLOWN 3.
09/05/18 19:14:04 31TA5620 0375 Fuses BLOWN FUSE PULLER FUSE PULLER 4. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse boxes by pulling out each one with the fuse puller provided on the back of the under-hood fuse box cover. 5. Look for a blown wire inside the fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower.
09/05/18 19:14:10 31TA5620 0376 Fuses If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket). If you replace the blown fuse with a spare fuse that has a lower rating, it might blow out again. This does not indicate that anything is wrong.
09/05/18 19:14:21 31TA5620 0377 Fuse Locations No. Amps. UNDER-HOOD FUSE BOX No. Amps. 1 − 1*1 100 A 1 − 1*2 120 A 1 − 2 40 A 2−1 − 2 − 2 40 A 2 − 3 30 A 2 − 4 (40 A) 2−5 − Circuits Protected Battery Battery Passenger’s Side Fuse Box Not Used ABS/VSA ABS/VSA Motor Passenger’s Side Fuse Box Not Used No. Amps.
09/05/18 19:14:31 31TA5620 0378 Fuse Locations No. Amps. INTERIOR FUSE BOX (Driver’s Side) 1 2 3 4 5 6 7 8 − − 15 A 7.5 A 7.5 A 7.5 A 15 A 7.5 A Circuits Protected Not Used Not Used Washer Wiper Meter ABS/VSA ACG STS* No. Amps. 9 10 11 12 20 A (10 A) 10 A 7.5 A 13 14 15 − (10 A) 7.5 A Circuits Protected Fuel Pump VB SOL * SRS ODS (Occupant Detection System) Not Used ACM* Daytime Running Lights 7.5 A 7.5 A 7.5 A (20 A) (20 A) (20 A) 20 A 15 A 20 A 10 A (10 A) 10 A 28 29 30 31 10 A 7.
09/05/18 19:14:42 31TA5620 0379 Fuse Locations No. Amps. INTERIOR FUSE BOX (Passenger’s Side) 16 17 18 19 20 21 22 *: No. Amps. 1 2 10 A 10 A 3 4 5 6 7 8 (10 A) 10 A − 7.5 A − (20 A) Circuits Protected Right Headlight High Beam Right Side Small Lights (Exterior) Right Front Fog Light* Right Headlight Low Beam Not Used Interior Lights Not Used Front Passenger’s Power Seat Reclining* No. Amps.
09/05/18 19:14:58 31TA5620 0380 Emergency Towing If your vehicle needs to be towed, call a professional towing service or organization. Never tow your vehicle with just a rope or chain. It is very dangerous. There are two ways to tow your vehicle: Flat-bed Equipment − The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. Manual transmission: Shift the transmission to neutral.
09/05/18 19:15:03 31TA5620 0381 Emergency Towing Trying to lif t or tow your vehicle by the bumpers will cause serious damage. The bumpers are not designed to support the vehicle’s weight. The steering system can be damaged if the steering wheel is locked. Leave the ignition switch in the ACCESSORY (I) position, and make sure the steering wheel turns f reely bef ore you begin towing.
09/07/08 21:45:06 31TA5620_382 Technical Information The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your vehicle’s tires and emissions control systems. Identification Numbers ................. 378 Specifications (4-cylinder models) ................... 380 Specifications (V6 models) ................................ 382 DOT Tire Quality Grading (U.S. Vehicles) ............
09/05/18 19:15:13 31TA5620 0383 Identification Numbers Your vehicle has several identifying numbers in various places. VEHICLE IDENTIFICATION NUMBER (VIN) The vehicle identification number (VIN) is the 17-digit number your dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver’s side.
09/05/18 19:15:19 31TA5620 0384 Identification Numbers The engine number is stamped on the front of the engine block. The transmission number is on a label on top of the transmission.
09/07/08 21:45:28 31TA5620_385 Specifications (4-cylinder models) Dimensions Length Width Height Wheelbase Track *1 : LX, LX-P Front/Rear 194.1 in (4,930 mm) 72.7 in (1,847 mm) 58.1 in (1,475 mm) 110.2 in (2,800 mm) 62.6 in (1,590 mm) *1 62.2 in (1,580 mm) *2 Seating Capacities Total Front Rear Capacities Fuel tank *2 : EX, EX-L Weights Gross vehicle weight rating Air Conditioning Refrigerant type Charge quantity Lubricant type Engine Type Bore x Stroke Displacement Compression ratio Spark plugs (U.
09/07/08 21:45:54 31TA5620_386 Specifications (4-cylinder models) Lights Headlights High Low Front turn signal/parking lights Front side marker lights Rear turn signal lights Back-up lights Stop/taillights License plate lights High-mount brake light Ceiling light Spotlights Trunk light Front door courtesy lights Vanity mirror lights 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 14 V − − − − − − − − − − − − − − 60 W (HB3) 51 W (HB4) 21/5 W 3 CP 21 W (Amber) 21 W 21/5 W 5W 21 W 8W 8W 5
09/05/18 19:16:33 31TA5620 0387 Specifications (V6 models) Dimensions Length Width Height Wheelbase Track Front/Rear Weights Gross vehicle weight rating Air Conditioning Refrigerant type Charge quantity Lubricant type Engine Type Bore x Stroke Displacement Compression ratio Spark plugs (U.S.) Spark plugs (Canada) Seating Capacities Total Front Rear 194.3 in (4,936 mm) 72.7 in (1,847 mm) 58.1 in (1,475 mm) 110.2 in (2,800 mm) 62.
09/07/08 21:46:17 31TA5620_388 Specifications (V6 models) Lights Headlights High Low Front turn signal/parking lights Front side marker lights Fog lights* Rear turn signal lights Back-up lights Stop/taillights License plate lights High-mount brake light Ceiling light Spotlights Trunk light Front door courtesy lights Vanity mirror lights 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 12 V 14 V − − − − − − − − − − − − − − − 60 W (HB3) 51 W (HB4) 21/5 W 3 CP 55 W (H11) 21 W (Amber) 21 W
09/05/18 19:17:06 31TA5620 0389 DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
09/05/18 19:17:10 31TA5620 0390 DOT Tire Quality Grading (U.S. Vehicles) Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
09/05/18 19:17:24 31TA5620 0391 Tire Labeling The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. Tire Labeling Example Tire Size Whenever tires are replaced, they should be replaced with tires of the same size. Following is an example of tire size with an explanation of what each component means. (1) P225/50R17 93V P − Vehicle type (P indicates passenger vehicle). 225 − Tire width in millimeters.
09/05/18 19:17:38 31TA5620 0392 Tire Labeling Tire Identification Number (TIN) The tire identification number (TIN) is a group of numbers and letters that look like the following example. TIN is located on the sidewall of the tire. DOT B97R FW6X 2202 DOT − This indicates that the tire meets all requirements of the U.S. Department of Transportation. B97R − Manufacturer’s identification mark. 2202 Load Rating − Means the maximum load that a tire is rated to carry for a given inflation pressure.
09/05/18 19:17:47 31TA5620 0393 Tire Pressure Monitoring System (TPMS) − Required Federal Explanation Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
09/05/18 19:17:52 31TA5620 0394 Tire Pressure Monitoring System (TPMS) − Required Federal Explanation Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is provided by a separate telltale, which displays the symbol ‘‘TPMS’’ when illuminated.
09/05/18 19:18:02 31TA5620 0395 Emissions Controls The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
09/05/18 19:18:17 31TA5620 0396 Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include three or four systems: PGM-FI, ignition timing control, exhaust gas recirculation (6-cylinder models), and three way catalytic converter. These systems work together to control the engine’s combustion and minimize the amount of HC, CO, and NOx that come out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
09/05/18 19:18:27 31TA5620 0397 Three Way Catalytic Converter The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent.
09/05/18 19:18:38 31TA5620 0398 Emissions Testing Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
09/05/18 19:18:45 31TA5620 0399 Emissions Testing 7. Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (automatic) or 5th (manual). Do not use the cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
09/05/18 19:18:49 31TA5620 0400 Warranty and Customer Relations 395 2010 Accord Sedan Warranty and Customer Relations Customer Service Information..... 396 Warranty Coverages ..................... 397 Reporting Safety Defects (U.S. Vehicle) ............................. 398 Authorized Manuals ......................
09/07/08 21:46:26 31TA5620_401 Customer Service Information Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s management. The service manager or general manager can help. Almost all problems are solved in this way. If you are dissatisfied with the decision made by the dealership’s management, contact Honda Customer Service.
09/05/18 19:19:13 31TA5620 0402 Warranty Coverages U.S. Owners Your new vehicle is covered by these warranties: Emissions Control Systems Defects Warranty and Emissions Performance Warranty − these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty − this warranty gives up to 100% credit toward a replacement battery.
09/05/18 19:19:18 31TA5620 0403 Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA), in addition to notifying American Honda Motor Co., Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
09/05/18 19:19:30 31TA5620 0404 Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order by phone or online: Call Helm Inc. at 1-800-782-4356 (credit card orders only) Go online at www. helminc. com If you are interested in other years or models, contact Helm Inc. at 1-800-782-4356.
09/05/18 19:19:41 31TA5620 0406 Index A B Battery Charging System Indicator............................ 56, 365 Jump Starting ............................. 360 Maintenance ............................... 347 Specifications ..................... 381, 383 Before Driving ............................... 255 Belts, Seat ..................................... 8, 18 Beverage Holders .......................... 111 Bluetooth HandsFreeLink ......... 230 Booster Seats ...................................
09/05/18 19:19:47 31TA5620 0407 Index CD Changer ........................... 163, 194 CD Player........................................ 141 Certification Label ......................... 378 Chains ............................................. 345 Changing a Flat Tire ..................... 353 Changing Oil How to ......................................... 314 When to....................................... 303 Charging System Indicator .... 56, 365 Check Fuel Cap Message .............
09/05/19 18:42:43 31TA5620 0408 Index Downshifting, Manual Transmission .............................. 278 Driver and Passenger Safety ............ 5 Driving ............................................ 275 Economy ..................................... 264 Dual Temperature Control ........... 130 Dust and Pollen Filter ................... 335 E F Fan, Interior ........................... 121, 128 Features .......................................... 119 Filling the Fuel Tank .....................
09/05/18 19:20:00 31TA5620 0409 Index Fuel .................................................. 256 Check Fuel Cap Message ......... 258 Fill Door and Cap....................... 257 Gauge ............................................ 66 Low Fuel Indicator ...................... 61 Octane Requirement ................. 256 Oxygenated ................................ 257 Tank, Refueling ......................... 257 Fuel Economy ................................ 264 Fuel Economy (ECO) Indicator .....
09/05/18 19:20:08 31TA5620 0410 Index VSA System .................................. 58 Indicators, Instrument Panel .......... 56 Infant Restraint ................................ 38 Infant Seats ....................................... 38 Tether Anchorage Points ........... 46 Inflation, Proper Tire .................... 339 Information Display ......................... 64 Inside Mirror .................................. 101 Inspection, Tire .............................. 341 Installing a Child Seat ....
09/05/18 19:20:15 31TA5620 0411 Index Low Coolant Level ......................... 263 Low Fuel Indicator .......................... 61 Lower Gear, Downshifting to a.... 278 Low Oil Pressure Indicator .... 56, 365 Lower Anchors................................. 42 Lubricant Specifications Chart ................................... 380, 382 Luggage, Storing (Cargo) ............ 269 Moonroof ........................................ 107 N Neutral Gear Position.................... 281 New Vehicle Break-in ...
09/05/19 18:42:48 31TA5620 0412 Index Protecting Children ......................... 33 General Guidelines ...................... 33 Protecting Infants ........................ 38 Protecting Larger Children ........ 47 Protecting Small Children .......... 39 Using Child Seats with Tethers...................................... 46 Using LATCH .............................. 42 R S Safety Belts................................... 8, 18 Safety Defects, Reporting* .......... 398 Safety Features ..............
09/05/19 18:42:52 31TA5620 0413 Index Shift Lock Release ......................... 283 Side Airbags ................................. 9, 27 How Your Side Airbags Work.... 27 How the Side Airbag Off Indicator Works ....................... 30 Side Curtain Airbags ................... 9, 28 How Your Side Curtain Airbags Work ........................... 28 Signaling Turns ................................ 69 Snow Tires ...................................... 345 Sound System .................................
09/05/18 19:20:34 31TA5620 0414 Index Transmission Checking Fluid Level, Automatic ............................... 319 Checking Fluid Level, Manual .................................... 321 Fluid Selection ................... 320, 321 Identification Number............... 379 Shifting the Automatic .............. 280 Shifting the Manual ................... 278 Treadwear ...................................... 341 Trip Meter ........................................ 65 Trunk..................................
09/05/18 19:20:38 31TA5620 0415 Index W WARNING, Explanation of ............. iii Warning Labels, Location of .......... 52 Warranty Coverages* ................... 397 Washers, Windshield Checking the Fluid Level ......... 318 Indicator ........................................ 62 Operation ...................................... 68 Wheels Adjusting the Steering ................ 75 Alignment and Balance ............. 342 Compact Spare ........................... 352 Wrench, Nut ...........................
09/05/18 19:20:56 31TA5620 0417 Service Information Summary Gasoline: Unleaded gasoline, pump octane number of 87 or higher. Fuel Tank Capacity: 18.5 US gal (70.0 ) Recommended Engine Oil: API Premium grade 5W-20 detergent oil (see page 312 ). Oil change capacity (including filter): 4-cylinder models 4.2 US qt (4.0 ) V6 models 4.5 US qt (4.3 ) Automatic Transmission Fluid: Honda Genuine ATF-Z1 (automatic transmission fluid) (see page 320 ).
09/05/18 18:06:36 31TA5620 0001 Owner’s Identification This owner’s manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. OWNER This owner’s manual covers all models of the Accord Sedan. You may find descriptions of equipment and features that are not on your particular model. ADDRESS STREET CITY STATE/PROVINCE/TERRITORY ZIP CODE/ POSTAL CODE V. I. N.