2010_TRG_US.qxd:QSG_US.
10 Accord TRG 4D_Inside Front:Inside Cvr 4/6/2009 9:48 AM Page 1 Indicators/Info Display/TPMS Instrument Panel Indicators Briefly appear with each engine start. Red and amber indicators are most critical. Blue and green indicators are used for general information. Malfunction Indicators: If an indicator remains on, there may be a problem; see your dealer.
10 Accord TRG 4D_1ab:ExtraPages.qxd 4/6/2009 9:32 AM Page a1 Condition Indicators: Action is needed.
10 Accord TRG 4D_1ab:ExtraPages.qxd 4/6/2009 9:32 AM Page b1 Information Display Consists of several displays that provide you with useful information. Accessing the Information Display Once you start the engine, the information display shows your last active selection from the previous drive cycle. Information Displays Odometer, Trip meter A Outside temperature*, Trip meter A To toggle between the different displays, press and release the select/reset knob repeatedly.
10 Accord TRG 4D_Base:Base 4/6/2009 Tire Pressure Monitoring System (TPMS) Monitors the vehicle’s tire pressures. How It Works Each tire valve stem contains a TPMS sensor. 9:48 AM Page 2 What to Do Visually inspect the tires and use a tire air pressure gauge to check which tire(s) have low pressure. IN S P ECT and When the tire pressure drops significantly below recommended levels, the low tire pressure indicator comes on.
10 Accord TRG 4D_Base:Base 4/6/2009 9:48 AM Page 3 Auto Door Locks/HomeLink® Auto Door Locking/Unlocking Default Lock Setting Default Unlock Setting The doors are preset to lock when your vehicle reaches about 9 mph. Only the driver’s door is preset to unlock when you shift into Park (P). Modifying the Auto Door Unlock Setting Follow these steps to program all doors to unlock when you shift to Park: 1. Close the driver’s door. Turn ignition to the ON (II) position. 2.
10 Accord TRG 4D_Base:Base 4/6/2009 9:48 AM Page 4 HomeLink® (EX-L V6) The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote-controlled devices around your home, such as garage doors, lighting, or home security systems. Training a Button 1 2 Retraining a Button 3 Position the remote transmitter you wish to link 1–3 inches from the HomeLink button you want to program.
10 Accord TRG 4D_Base:Base 4/6/2009 9:49 AM Page 5 Voice Command/ HFL/Navigation Voice Command Using the Voice Command System To reduce driver distraction, use voice commands for hands-free calling, navigation, audio, and climate control functions. A full list of these commands is in the navigation system manual. HFL Talk button: Give HFL commands or answer incoming calls. NAVI Talk button: Give navigation, audio, and climate control commands.
10 Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:32 AM Page a5 Bluetooth® HandsFreeLink® (if equipped) Pairing Your Phone Press and release the HFL Talk button before you give a command. 1 Enable “Discovery” or “Search” mode on your Bluetooth-compatible phone. Has a phone been paired to the system before? The system gives you information about pairing a phone for the first time. 4 2 Say “Phone setup.” 3 Say “Pair.” HFL gives you a four-digit pairing code.
Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:32 AM Page b5 Making a Call 1. Press the HFL Talk button. 2. Say “Call” and the desired phone number. 3. Press the HFL Talk button, and say “Call” or “Dial” to continue. 4. The call is connected and heard through the speakers. Receiving a Call 1. A notification is heard, and “INCOMING CALL” and the phone number appear on the audio display. 2. Press the HFL Talk button to accept the call. 3. Press the HFL Back button to end or decline the call.
10 Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:32 AM Page c5 Navigation (if equipped) Entering a Destination Using Voice Commands Press and release the NAVI Talk button before you give a command. 1 Say “Display menu.” 2 Say “Address.” 3 Say “City” (or “Change state” if necessary). 4 Say the name of the city you want, or say “Current city” to select the city currently shown. 5 A list of city names appears. Say the number listed next to the city you want to select. 6 Say the street name.
10 Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:32 AM Page d5 Entering a Destination Using the “Find Nearest” Command Try these simple steps to find a nearby point of interest, such as a gas station, movie theater, or restaurant. Press and release the NAVI Talk button before you give a command. 1. Say “Find nearest ATM.” 3. Say the number you want to select. 2. A list of the nearest ATMs are displayed by shortest distance to destination. 4.
10 Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:32 AM Page e5 Commonly Used Voice Commands Here are some examples of commonly used voice commands. Try some of these to familiarize yourself with the voice command system. Press and release the NAVI Talk button before you give a command. Looking for Restaurants in Your Location Say a command like “Display Chinese restaurants” to see restaurant icons appear on the map.
10 Accord TRG 4D_5abc:ExtraPages.qxd 4/6/2009 9:33 AM Page f5 Commonly Used Voice Commands (continued) Press and release the NAVI Talk button before you give a command.
2010_TRG_US.qxd:QSG_US.qxd 4/13/09 5:03 PM Page 4 About This Technology Reference Guide Fuel Recommendation This Technology Reference Guide has been prepared to help you get quickly acquainted with your new Honda, and to provide reference instructions on driving controls and convenience items. • Use only unleaded gasoline of 87 octane or higher. • Some gasoline in North America contains MMT, a manganese-based fuel additive.
10 Accord TRG 4D_Inside Back2:Inside Back 4/6/2009 9:49 AM Page 6 Commonly Used Voice Commands (continued) Press and release the NAVI Talk button before you give a command.