09/07/02 16:24:48 31SNA640_002 Introduction Congratulations! Your selection of a 2010 Honda Civic was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner’s manual in your vehicle so you can refer to it at any time. As you read this manual, you will find information that is preceded by a symbol.
09/07/02 16:24:53 31SNA640_003 Introduction California Proposition 65 Warning WARNING: This product contains or emits chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Event Data Recorders This vehicle is equipped with one or more devices commonly referred to as event data recorders. These devices record front seat belt use, front passenger seat occupancy, airbag deployment data, and the failure of any airbag system component.
09/07/02 16:25:09 31SNA640_004 A Few Words About Safety Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others.
09/07/02 16:25:24 31SNA640_006 2010 Civic Sedan Online Reference Owner's Manual Contents Owner's Identification Form Your Vehicle at a Glance (main controls) ................................................................................................ 3 Driver and Passenger Safety (seat belts, SRS, and child protection) ............................................................. 5 Instruments and Controls (indicators, gauges, dashboard, and steering column) ..........................................
09/07/02 16:25:44 31SNA640_007 Overview of Contents Contents A convenient reference to the sections in this manual. Your Vehicle at a Glance A quick reference to the main controls in your vehicle. Driver and Passenger Safety Important information about the proper use and care of your vehicle’s seat belts, an overview of the supplemental restraint system, and valuable information on how to protect children with child restraints.
09/07/02 16:25:51 31SNA640_008 Your Vehicle at a Glance PASSENGER’S FRONT AIRBAG (P.9, 30) DRIVER’S FRONT AIRBAG (P.9, 24) MIRROR CONTROLS* (P.104) HEATING/COOLING CONTROLS (P.110) POWER DOOR LOCK MASTER SWITCH* (P.82) DOOR LOCK TAB (P.81) POWER WINDOW SWITCHES (P.101) ACCESSORY POWER SOCKET (P.108) FUEL FILL DOOR RELEASE HANDLE (P.239) TRUNK RELEASE HANDLE (P.88) AUXILIARY INPUT JACK* (P.205) SEAT HEATER SWITCHES* (P.100) AUTOMATIC TRANSMISSION (P.260) MANUAL TRANSMISSION (P.
09/07/02 16:25:59 31SNA640_009 Your Vehicle at a Glance INSTRUMENT PANEL BRIGHTNESS BUTTONS (P.75) HEADLIGHTS/TURN SIGNALS (P.73) FOG LIGHTS*3 (P.74) WINDSHIELD WIPERS/WASHERS (P.72) PASSENGER AIRBAG OFF INDICATOR (P.30) DISPLAY CHANGE BUTTON (P.66) SEL/RESET BUTTON (P.66) HAZARD WARNING BUTTON (P.76) VEHICLE STABILITY ASSIST (VSA) OFF SWITCH*2 (P.269) REMOTE AUDIO CONTROLS*2 (P.204) REAR WINDOW DEFOGGER (P.76) HEATED MIRRORS*2 (P.104) BLUETOOTH HANDSFREELINK SYSTEM VOICE CONTROL BUTTONS*4 (P.
09/07/02 16:26:04 31SNA640_010 Driver and Passenger Safety Important Safety Precautions .......... 6 Your Vehicle’s Safety Features........ 7 Seat Belts ........................................ 8 Airbags ............................................ 9 Protecting Adults and Teens.......... 11 1. Close and Lock the Doors ...... 11 2. Adjust the Front Seats ............ 11 3. Adjust the Seat-Backs ............. 12 4. Adjust the Head Restraints .... 13 5. Fasten and Position the Seat Belts ....................
09/07/02 16:26:17 31SNA640_011 Important Safety Precautions You’ll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them.
09/07/02 16:26:26 31SNA640_012 Your Vehicle’s Safety Features (9) (3) (9) (1) (8) (7) (6) (2) (8) (5) (12) (10) (11) (2) (1) Safety Cage (2) Crush Zones (3) Seats and Seat-Backs (4) Head Restraints (5) Collapsible Steering Column (6) Seat Belts (7) Front Airbags (8) Side Airbags (9) Side Curtain Airbags (10) Front Seat Belt Tensioners (11) Door Locks (12) Front Seat Belt Buckle Tensioners Some features do not require any action on your part.
09/07/02 16:26:42 31SNA640_013 Your Vehicle’s Safety Features Seat Belts Your vehicle is equipped with seat belts in all seating positions. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. Why Wear Seat Belts Seat belts are the single most effective safety device for adults and larger children. (Infants and smaller children must be properly restrained in child seats.
09/07/02 16:26:51 31SNA640_014 Your Vehicle’s Safety Features Airbags Driver and Passenger Safety Your vehicle has a supplemental restraint system (SRS) with front airbags to help protect the heads and chests of the driver and a front seat passenger during a moderate to severe frontal collision (see page 24 for more information on how your front airbags work).
09/07/02 16:27:01 31SNA640_015 Your Vehicle’s Safety Features The most important things you need to know about your airbags are: Airbags do not replace seat belts. They are designed to supplement the seat belts. Airbags offer no protection in rear impacts, or minor frontal or side collisions. Airbags can pose serious hazards. To do their job, airbags must inflate with tremendous force.
09/07/02 16:27:15 31SNA640_016 Protecting Adults and Teens See pages 33 − 37 for important guidelines on how to properly protect infants, small children, and larger children who ride in your vehicle. 1.Close and Lock the Doors After everyone has entered the vehicle, be sure the doors are closed and locked. 2.Adjust the Front Seats Your vehicle has a door-open indicator on the instrument panel to indicate when any door is open.
09/07/02 16:27:26 31SNA640_017 Protecting Adults and Teens If you sit too close to the steering wheel or dashboard, you can be seriously injured by an inflating front airbag, or by striking the steering wheel or dashboard. The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
09/07/02 16:27:39 31SNA640_018 Protecting Adults and Teens 4.Adjust the Head Restraints Improperly positioning head restraints reduces their effectiveness and you can be seriously injured in a crash. Adjust the seat-back to an upright position, and sit well back in the seat. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt.
09/07/02 16:27:46 31SNA640_019 Protecting Adults and Teens This spreads the forces of a crash over the strongest bones in your upper body. 5.Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. Improperly positioning the seat belts can cause serious injury or death in a crash.
09/07/02 16:27:58 31SNA640_020 Protecting Adults and Teens RELEASE BUTTON Never place the shoulder portion of a lap/shoulder belt under your arm or behind your back. This could cause If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat with an inoperative seat belt. Using a seat If the seat belt touches or crosses your neck, or if it crosses your arm instead of your shoulder, you need to adjust the seat belt anchor height.
09/07/02 16:28:07 31SNA640_021 Protecting Adults and Teens In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag. Advice for Pregnant Women This will reduce the risk of injuries to both you and your unborn child that can be caused by a crash or an inflating front airbag. Sitting improperly or out of position can result in serious injury or death in a crash.
09/07/02 16:28:16 31SNA640_022 Protecting Adults and Teens Additional Safety Precautions Two people should never use the same seat belt. If they do, they Do not put any accessories on seat belts. Devices intended to improve occupant comfort or reposition the shoulder part of a seat belt can reduce the protective capability of the belt and increase the chance of serious injury in a crash. Do not attach hard objects on or near a door.
09/07/02 16:28:30 31SNA640_023 Additional Information About Your Seat Belts Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all seating positions. The front seat belts are also equipped with automatic seat belt tensioners. This system uses the same sensors as the front airbags to monitor whether the front seat belts are latched or unlatched, and how much weight is on the front passenger’s seat (see pages 26 and 27 ).
09/07/02 16:28:43 31SNA640_024 Additional Information About Your Seat Belts To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page 14 for how to properly position the belt). To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
09/07/02 16:28:54 31SNA640_025 Additional Information About Your Seat Belts If a side curtain airbag deploys during a side impact, the tensioner on that side of the vehicle will also deploy. The tensioners can also be activated during a collision in which the front airbags do not deploy. In this case, the airbags would not be needed, but the extra tension in the seat belt could be helpful. When the tensioners are activated, the seat belts will remain tight until they are unbuckled.
09/07/02 16:29:01 31SNA640_026 Additional Information About Your Airbags Airbag System Components (1) (9) (2) (3) (12) Driver and Passenger Safety (8) (11) (5) (1) Driver’s Front Airbag (2) Passenger’s Front Airbag (3) Control Unit (4) Automatic Front Seat Belt Tensioners (5) Side Airbags (6) Driver’s Seat Position Sensor (6) (7) Front Passenger’s Weight Sensors (8) Front Impact Sensors (9) Passenger Airbag Off Indicator (10) Side Impact Sensors (First) (11) Occupant Position Detection System (OPDS)
09/07/02 16:29:08 31SNA640_027 Additional Information About Your Airbags Your airbag system includes: Two SRS (supplemental restraint system) front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’s airbag is stored in the dashboard. Both are marked ‘‘SRS AIRBAG’’ (see page 24 ). (16) Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seatbacks. Both are marked ‘‘SIDE AIRBAG’’ (see page 27 ).
09/07/02 16:29:20 31SNA640_028 Additional Information About Your Airbags Automatic front seat belt tensioners (see page 19 ). Sensors that can detect whether a child is in the passenger’s side airbag path and signal the control unit to turn the airbag off (see page 28 ). Sensors that can detect whether the driver’s seat belt and the front passenger’s seat belt are latched or unlatched (see page 18 ). A driver’s seat position sensor that monitors the distance of the seat from the front airbag.
09/07/02 16:29:31 31SNA640_029 Additional Information About Your Airbags How Your Front Airbags Work During a frontal crash, your seat belt restrains your lower body and torso, and the front airbag helps protect your head and chest. Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy. If you ever have a moderate to severe frontal collision, sensors will detect the vehicle’s rapid deceleration.
09/07/02 16:29:41 31SNA640_030 Additional Information About Your Airbags Dual-Stage Airbags Dual-Threshold Airbags Your front airbags are dual-stage airbags. This means they have two inflation stages that can be ignited sequentially or simultaneously, depending on crash severity. Your front airbags are also dualthreshold airbags. Airbags with this feature have two deployment thresholds that depend on whether sensors detect the occupant is wearing a seat belt or not.
09/07/02 16:29:53 31SNA640_031 Additional Information About Your Airbags Advanced Airbags Your front airbags are also advanced airbags. The main purpose of this feature is to help prevent airbagcaused injuries to short drivers and children or small-statured adults who ride in front. For both advanced airbags to work properly: Occupants must sit upright and wear their seat belts properly.
09/07/02 16:30:07 31SNA640_032 Additional Information About Your Airbags Moving the front seat forcibly back against cargo on the seat or floor behind it. When the passenger airbag gets turned off by the weight sensors, a ‘‘passenger airbag off’’ indicator in the center of the dashboard comes on (see page 30 ). If the weight sensors detect there is no passenger in the front seat, the airbag is automatically turned off. However, the passenger airbag off indicator in this situation will not come on.
09/07/02 16:30:17 31SNA640_033 Additional Information About Your Airbags Only one airbag will deploy during a side impact. If the impact is on the passenger’s side, the passenger’s side airbag will deploy even if there is no passenger. To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats.
09/07/02 16:30:31 31SNA640_034 Additional Information About Your Airbags How Your Side Curtain Airbags Work To get the best protection from the side curtain airbags, occupants should wear their seat belts and sit upright and well back in their seats.
09/07/02 16:30:43 31SNA640_035 Additional Information About Your Airbags If you see any of these indications, the airbags and seat belt tensioners may not work properly when you need them. Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly. Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem. 30 U.S.
09/07/02 16:30:58 31SNA640_036 Additional Information About Your Airbags Be aware that objects placed on the front seat can cause the indicator to come on. The passenger airbag off indicator may come on and off repeatedly if the total weight on the seat is near the airbag cutoff threshold. If an adult or teenage passenger is riding in front, move the seat as far to the rear as possible, and have the passenger sit upright and wear the seat belt properly. Any items under the front passenger’s seat.
09/07/02 16:31:06 31SNA640_037 Additional Information About Your Airbags If your vehicle has a moderate to severe impact. Even if your airbags do not inflate, your dealer should inspect the driver’s seat position sensor, the front passenger’s weight sensors, the front seat belt tensioners, and all seat belts and their anchors worn during a crash to make sure they are operating properly. Additional Safety Precautions Do not attempt to deactivate your airbags.
09/07/02 16:31:17 31SNA640_038 Protecting Children − General Guidelines Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to properly protect child passengers. If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.
09/07/02 16:31:28 31SNA640_039 Protecting Children − General Guidelines All Children Should Sit in a Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.
09/07/02 16:31:46 31SNA640_040 Protecting Children − General Guidelines U.S. Models Sun Visor Dashboard Driver and Passenger Safety To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
09/07/02 16:31:56 31SNA640_041 Protecting Children − General Guidelines If You Must Drive with Several Children Your vehicle has a back seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page 47 ). Move the vehicle seat as far to the rear as possible (see page 93 ).
09/07/02 16:32:07 31SNA640_042 Protecting Children − General Guidelines Additional Safety Precautions Never hold an infant or child on your lap. If you are not wearing a Never put a seat belt over yourself and a child. During a crash, the belt could press deep into the child and cause serious or fatal injuries. Never let two children use the same seat belt. If they do, they could be very seriously injured in a crash.
09/07/02 16:32:20 31SNA640_043 Protecting Infants and Small Children Protecting Infants Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rearfacing, reclining mode. Do not put a rear-facing child seat in a forward-facing position. If placed facing forward, an infant could be very seriously injured during a frontal collision.
09/07/02 16:32:32 31SNA640_044 Protecting Infants and Small Children Protecting Small Children Of the different seats available, we recommend those that have a fivepoint harness system as shown. We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat. Placing a rear-facing child seat in the front seat can result in serious injury or death during a collision.
09/07/02 16:32:44 31SNA640_045 Protecting Infants and Small Children, Selecting a Child Seat Even with advanced front airbags that automatically turn the passenger’s front airbag off (see page 26 ), a back seat is the safest place for a small child. If it is necessary to put a forwardfacing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.
09/07/02 16:32:56 31SNA640_046 Selecting a Child Seat, Installing a Child Seat 2. The child seat should be of the proper type and size to fit the child. 3. The child seat should fit the vehicle seating position (or positions) where it will be used. Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position or positions where the seat will be used. 1. Properly secure the child seat to the vehicle.
09/07/02 16:33:08 31SNA640_047 Installing a Child Seat Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the outer rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anchor point. BUTTON LOWER ANCHORS To install a LATCH-compatible child seat: 1.
09/07/02 16:33:19 31SNA640_048 Installing a Child Seat ANCHOR 7. Push and pull the child seat forward and from side-to-side to verify that it is secure. Flexible type Other LATCH-compatible seats have a flexible-type connector as shown above. 4. Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely. 5.
09/07/02 16:33:28 31SNA640_049 Installing a Child Seat Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt. In addition, the lap/shoulder belts in all seating positions except the driver’s have a lockable retractor that must be activated to secure a child seat. 1.
09/07/02 16:33:38 31SNA640_050 Installing a Child Seat Installing a Child Seat with a Tether Driver and Passenger Safety ANCHORAGE POINTS COVER 4. After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
09/07/02 16:33:45 31SNA640_051 Installing a Child Seat TETHER STRAP HOOK TETHER STRAP HOOK ANCHOR ANCHOR Outer Position 1. After properly securing the child seat (see page 44 ), lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs. 2. Lift the anchor cover, then attach the tether strap hook to the anchor, making sure the strap is not twisted. 46 Center Position 3. Tighten the strap according to the seat maker’s instructions.
09/07/02 16:33:55 31SNA640_052 Protecting Larger Children When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear the lap/ shoulder belt. Allowing a child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.
09/07/02 16:34:07 31SNA640_053 Protecting Larger Children 3. Does the shoulder belt cross between the child’s neck and arm? Using a Booster Seat Booster seats can be high-back or low-back. Whichever style you select, make sure the booster seat meets federal safety standards (see page 40 ) and that you follow the booster seat maker’s instructions. 4. Is the lap part of the belt as low as possible, touching the child’s thighs? 5.
09/07/02 16:34:20 31SNA640_054 Protecting Larger Children If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position. Of course, children vary widely. And while age may be one indicator of when a child can safely ride in front, there are other important factors you should consider.
09/07/02 16:34:27 31SNA640_055 Protecting Larger Children Additional Safety Precautions Do not let a child wear a seat belt across the neck. This could result in serious neck injuries during a crash. Do not let a child put the shoulder part of a seat belt behind the back or under the arm. This could cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured. Two children should never use the same seat belt.
09/07/02 16:34:37 31SNA640_056 Carbon Monoxide Hazard Have the exhaust system inspected for leaks whenever: Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you. Avoid any enclosed areas or activities that expose you to carbon monoxide. The vehicle is raised for an oil change. You notice a change in the sound of the exhaust. The vehicle was in a collision that may have damaged the underside.
09/07/02 16:34:56 31SNA640_057 Safety Labels These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully. DASHBOARD SUN VISOR U.S. models only U.S. models If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement.
09/07/02 16:35:07 31SNA640_058 Safety Labels DOORJAMBS U.S.
09/07/02 16:35:09 31SNA640_059 54
09/07/02 16:35:14 31SNA640_060 Instruments and Controls This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Auto Door Unlocking .................. 85 Trunk................................................. 88 Emergency Trunk Opener ......... 89 Remote Transmitter ........................ 90 Seats .................................................. 93 Seat Heaters .............................
09/07/02 16:35:21 31SNA640_061 Control Locations INSTRUMENT PANEL INDICATORS (P.57) GAUGES (P.66) MOONROOF SWITCH* (P.102) HEATING/COOLING CONTROLS (P.110) MIRROR CONTROLS* (P.104) POWER DOOR LOCK MASTER SWITCH* (P.82) DOOR LOCK TAB (P.81) ACCESSORY POWER SOCKET (P.108) POWER WINDOW SWITCHES (P.101) FUEL FILL DOOR RELEASE HANDLE (P.239) TRUNK RELEASE HANDLE (P.88) AUXILIARY INPUT JACK* (P.205) Vehicle with navigation system is shown. * : If equipped 56 AUDIO SYSTEM* (P.
09/07/02 16:35:29 31SNA640_062 Instrument Panel DX, DX-G (Canada), LX (U.S.), LX-S (U.S.), Sport (Canada), EX (U.S.), EX-L SECURITY SYSTEM INDICATOR (P.65) SIDE AIRBAG LIGHTS ON OFF INDICATOR INDICATOR (P.60) (P.61) HIGH BEAM SUPPLEMENTAL INDICATOR RESTRAINT SYSTEM (P.61) INDICATOR (P.60) LOW TIRE PRESSURE INDICATOR (P.63) CRUISE MAIN INDICATOR (P.64) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR (P.60) VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.62) SEAT BELT REMINDER INDICATOR (P.
09/07/02 16:35:38 31SNA640_063 Instrument Panel Si SECURITY SYSTEM INDICATOR (P.65) REV LIMIT INDICATOR (P.64) SIDE AIRBAG OFF INDICATOR (P.60) LOW FUEL INDICATOR (P.64) VSA ACTIVATION INDICATOR (P.62) FOG LIGHT INDICATOR (P.61) LIGHTS ON HIGH BEAM INDICATOR INDICATOR (P.61) (P.61) SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P.60) DAYTIME RUNNING LIGHTS INDICATOR (P.61) VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.62) CRUISE CONTROL INDICATOR (P.64) ELECTRIC POWER STEERING (EPS) INDICATOR (P.
09/07/02 16:35:49 31SNA640_064 Instrument Panel Indicators The instrument panel has many indicators to give you important information about your vehicle. Seat Belt Reminder Indicator This indicator reminds you and your passengers to fasten your seat belts. If your front passenger does not fasten their seat belt, the indicator comes on about 6 seconds after the ignition switch is turned to the ON (II) position.
09/07/02 16:36:02 31SNA640_065 Instrument Panel Indicators Supplemental Restraint System Indicator This indicator comes on for several seconds when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates a potential problem with your front airbags.
09/07/02 16:36:19 31SNA640_066 Instrument Panel Indicators When you press the hazard warning button, both turn signal indicators and all turn signals on the outside of the vehicle flash. Daytime Running Lights Indicator If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem with a circuit. Have your vehicle checked by your dealer. High Beam Indicator This indicator comes on with the high beam headlights.
09/07/02 16:36:35 31SNA640_067 Instrument Panel Indicators Vehicle Stability Assist (VSA) System Indicator VSA Activation Indicator If equipped If equipped This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. This indicator has three functions: If it comes on and stays on at any other time, or if it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the VSA system.
09/07/02 16:36:46 31SNA640_068 Instrument Panel Indicators Low Tire Pressure Indicator Tire Pressure Monitoring System (TPMS) Indicator U.S. models only U.S. models only This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it comes on while driving, it indicates that one or more of your vehicle’s tires are significantly low on pressure.
09/07/02 16:37:05 31SNA640_069 Instrument Panel Indicators Rev Limit Indicator REV LIMIT INDICATOR Cruise Main Indicator If equipped This indicator comes on when you turn on the cruise control system by pressing the CRUISE button (see page 209 ). Low Fuel Indicator LOW FUEL INDICATOR Cruise Control Indicator If equipped Si model only This indicator shows you when the engine speed is near the tachometer’s red zone. When the engine speed gets to near the red zone, the indicator blinks.
09/07/02 16:37:20 31SNA640_070 Instrument Panel Indicators This indicator goes off when your dealer resets it after completing the required maintenance service. Security System Indicator Except Si Si SECURITY SYSTEM INDICATOR If equipped This indicator comes on when the security system is set. See page 208 for more information on the security system. Malfunction Indicator Lamp See page 340 .
09/07/02 16:37:29 31SNA640_071 Gauges SPEEDOMETER TEMPERATURE GAUGE FUEL GAUGE TACHOMETER INFORMATION DISPLAY ODOMETER/OUTSIDE TEMPERATURE INDICATOR TRIP METER INSTRUMENT PANEL BRIGHTNESS CONTROL BUTTONS SEL/RESET BUTTON U.S. model with A/T is shown. 66 DISPLAY CHANGE BUTTON Display Change Button Press and hold until the speedometer, trip meter, and odometer readings switch between miles per hour and kilometers per hour. A beeper will sound.
09/07/02 16:37:39 31SNA640_072 Gauges Information Display : Press the SEL/ RESET button. OUTSIDE TEMPERATURE INDICATOR ENGINE OIL LIFE U.S. model with outside temperature indicator is shown. : Press the SEL/ RESET button. Odometer TRIP METER B TRIP METER A This shows the total distance your vehicle has been driven. It measures miles or kilometers. It is illegal under U.S.
09/07/02 16:37:52 31SNA640_073 Gauges Trip Meter This meter shows the number of miles or kilometers driven since you last reset it. There are two trip meters: TRIP A and TRIP B. Switch between these displays by pressing the SEL/ RESET button repeatedly. Each trip meter works independently, so you can keep track of two different distances. To reset a trip meter, display it, and then press and hold the SEL/RESET button until the number resets to ‘‘0.0.
09/07/02 16:37:59 31SNA640_074 Gauges Check Fuel Cap Message If the system still detects a leak in your vehicle’s evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is tightened or replaced. If the MIL does not go off, have your vehicle inspected by a dealer.
09/07/02 16:38:06 31SNA640_075 Gauges Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount. Avoid driving with an extremely low f uel level. Running out of f uel could cause the engine to misf ire, damaging the catalytic converter. 70 Temperature Gauge This shows the temperature of the engine’s coolant. During normal operation, the reading should rise to about the middle of the gauge.
09/07/02 16:38:14 31SNA640_076 Controls Near the Steering Wheel INSTRUMENT PANEL BRIGHTNESS (P.75) HEADLIGHTS/TURN SIGNALS (P.73) FOG LIGHTS*3 (P.74) WINDSHIELD WIPERS/WASHERS (P.72) SEL/RESET BUTTON (P.66) HAZARD WARNING BUTTON (P.76) VEHICLE STABILITY ASSIST (VSA) OFF SWITCH*2 (P.269) REMOTE AUDIO CONTROLS*2 (P.204) REAR WINDOW DEFOGGER (P.76) HEATED MIRRORS*2 (P.104) BLUETOOTH HANDSFREELINK SYSTEM VOICE CONTROL BUTTONS*4 (P.212) HOOD RELEASE HANDLE (P.
09/07/02 16:38:26 31SNA640_077 Windshield Wipers and Washers MIST − The wipers run at high speed until you release the lever. OFF − The wipers are not activated. INT − The wipers operate every few seconds. At low speed and high speed, the wipers run continuously. ADJUSTMENT RING* *: EX-L, Si, U.S. EX, and Canadian Sport 1. MIST 2. OFF 3. INT − Intermittent 4. LO − Low speed 5. HI − High speed 6. Windshield washers Push the right lever up or down to select a position. 72 On EX-L, Si, U.S.
09/07/02 16:38:37 31SNA640_078 Turn Signals and Headlights Headlights On − Turning the switch to the ‘‘ ’’ position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. 1. Turn Signal 2. OFF 3. Parking and interior lights 4. Headlights on 5. High Beams 6. Flash high beams High Beams − Push the lever forward until you hear a click. The high beam indicator will come on (see page 61 ). Pull the lever back to return to the low beams.
09/07/02 16:38:45 31SNA640_079 Headlights, Fog Lights Daytime Running Lights With the headlight switch off or position, the high beam headlights come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch.
09/07/02 16:38:54 31SNA640_080 Instrument Panel Brightness To reduce glare at night, the instrument panel illumination dims when you turn the light switch to the or position. INSTRUMENT PANEL BRIGHTNESS CONTROL BUTTONS The buttons under the left side vent control the brightness of the instrument panel. Push the + or − button to adjust the brightness. Separate adjustments can be made when the headlights are on and off. There are six brightness levels.
09/07/02 16:39:03 31SNA640_081 Hazard Warning Button, Rear Window Defogger Hazard Warning Button Make sure the rear window is clear and you have good visibility before starting to drive. Rear Window Defogger The defogger and antenna wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe sideto-side. EX-L, Canadian Sport, and Si Push the button to turn on the hazard warning lights (four-way flashers).
09/07/02 16:39:12 31SNA640_082 Steering Wheel Adjustment 3. Push the lever up to lock the steering wheel in position. Make any steering wheel adjustment before you start driving. Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash. Adjust the steering wheel only when the vehicle is stopped. 1. Push the lever under the steering column all the way down. 2.
09/07/02 16:39:20 31SNA640_083 Keys and Locks EX-L, Si, U.S. EX, and Canadian Sport models KEY NUMBER TAG MASTER KEY WITH REMOTE TRANSMITTER VALET KEY (Gray) The master key fits all the locks on your vehicle. 78 U.S. LX, LX-S, and Canadian DX-G models KEY NUMBER TAG MASTER KEY WITH REMOTE TRANSMITTER DX model VALET KEY (Gray) The valet key works only in the ignition and the door locks.
09/07/02 16:39:33 31SNA640_084 Keys and Locks, Immobilizer System These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged. Do not drop the keys or set heavy objects on them. Keep the keys away from liquids. If they get wet, dry them immediately with a soft cloth. The keys without a remote transmitter do not contain batteries. Do not try to take them apart.
09/07/02 16:39:45 31SNA640_085 Immobilizer System, Ignition Switch As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ignition Switch ACCESSORY (I) − You can operate the audio system and the accessory power sockets in this position.
09/07/02 16:39:53 31SNA640_086 Ignition Switch, Door Locks You will hear a reminder beeper if you leave the key in the LOCK (0) or the ACCESSORY (I) position and open the driver’s door. Remove the key to turn off the beeper. On DX models LOCK TAB To lock To lock any passenger’s door when getting out of the vehicle, pull the lock tab out, and close the door. To lock the driver’s door, pull and hold the outside door handle, then pull the lock tab out. Release the handle, then close the door.
09/07/02 16:40:05 31SNA640_087 Door Locks Power Door Locks To lock To unlock MASTER DOOR LOCK SWITCH On all models except DX To lock the doors, push the top of the master door lock switch on either front door, pull out the lock tab on the driver’s door, or use the key in the outside lock on the driver’s door. Pushing the bottom of either master door lock switch unlocks all doors. 82 The lock tab on the passenger’s door locks and unlocks only that door.
09/07/02 16:40:17 31SNA640_088 Door Locks Auto Door Locking/Unlocking On all models except DX When you customize the setting, make sure your vehicle is parked safely, the engine is off, and the parking brake is applied. Make all settings before you start driving. To turn off the Auto Door Lock modes: The auto door locking is deactivated all the time. The doors lock whenever you move the shift lever out of the Park (P) position (A/T vehicles).
09/07/02 16:40:29 31SNA640_089 Door Locks 3. Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds). To program the Park Lock mode: Locks all doors when the shift lever is moved out of the Park (P) position (A/T vehicles only). 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. 1.
09/07/02 16:40:43 31SNA640_090 Door Locks To program the Drive Lock mode: Locks all doors when the vehicle’s speed reaches about 9 mph (15 km/h). 3. On A/T vehicles, push and hold the brake pedal, and move the shift lever out of the Park (P) position. A/T models 1. Make sure the shift lever is in the Park (P) position (A/T vehicles). 5. Release the switch, and within 5 seconds, turn the ignition switch to the ACCESSORY (I) position. On A/T vehicles, move the shift lever to the Park (P) position.
09/07/02 16:40:53 31SNA640_091 Door Locks The driver’s door unlocks whenever you turn the ignition switch to the ACCESSORY (I) position. This is the default setting on M/T vehicles. To turn off the Auto Door Unlock modes: 4. Release the switch, and within 5 seconds, turn the ignition switch to the LOCK (0) position. All doors unlock whenever you turn the ignition switch to the ACCESSORY (I) position. 1. Make sure the shift lever is in the Park (P) position (A/T vehicles). 2.
09/07/02 16:41:06 31SNA640_092 Door Locks To program the Park Unlock mode: Unlocks the driver’s door or all doors when the shift lever is moved into the Park (P) position with the brake pedal depressed (A/T vehicles only). 3. Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold the switch: To program the Ignition Switch Unlock mode: Unlocks the driver’s door or all doors when the ignition switch is moved out of the ON (II) position.
09/07/02 16:41:17 31SNA640_093 Door Locks, Trunk 3. On A/T vehicles, push and hold the brake pedal, then move the shift lever out of the Park (P) position. Even if your vehicle’s battery is removed or goes dead, the system keeps the auto door lock/unlock setting which you selected. Trunk PULL 4. Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click.
09/07/02 16:41:27 31SNA640_094 Trunk On EX-L, Si, U.S. EX, and Canadian Sport models Press and hold the trunk release button on the remote transmitter. Emergency Trunk Opener Keep the trunk lid closed at all times while driving to avoid damaging it, and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard, page 51 . RELEASE LEVER MASTER KEY Use the master key to open the trunk lock. The valet key does not work in this lock.
09/07/02 16:41:37 31SNA640_095 Remote Transmitter EX-L, Si, U.S. EX, and Canadian Sport models PANIC BUTTON TRUNK UNLOCK BUTTON RELEASE BUTTON PANIC BUTTON LOCK BUTTON UNLOCK BUTTON LOCK BUTTON U.S. LX, LX-S, and Canadian DX-G models LOCK − Press this button once to lock all doors. Some exterior lights will flash once. When you push LOCK twice within 5 seconds, you will hear a horn to verify that the doors are locked.
09/07/02 16:41:50 31SNA640_096 Remote Transmitter Remote Transmitter Care Avoid dropping or throwing the transmitter. Instruments and Controls Protect the transmitter from extreme temperature. Replacing the Transmitter Battery If it takes several pushes on the button to lock or unlock the doors, replace the battery as soon as possible. Battery type: CR1616 Do not immerse the transmitter in any liquid. If you lose a transmitter, the replacement needs to be reprogrammed by your dealer.
09/07/02 16:42:00 31SNA640_097 Remote Transmitter 4. Remove the old battery from the back of the inner cover, and note the polarity. Make sure the polarity of the new battery is the same (+ side facing down), then insert it into the back of the cover. BATTERY TAB An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal. 5. Install the parts in reverse order. 3.
09/07/02 16:42:10 31SNA640_098 Seats Front Seat Adjustments See pages 11 − 13 for important safety information and warnings about how to properly position seats and seat-backs. To adjust the seat forward or backward, pull up on the bar under the seat cushion’s front edge. Move the seat to the desired position, and release the bar. Try to move the seat to make sure it is locked in position. To change the seat-back angle, pull up on the lever on the outside of the seat bottom.
09/07/02 16:42:19 31SNA640_099 Seats Driver’s Seat Height Adjustment Head Restraints See page 13 for important safety information and a warning about improperly positioning head restraints. Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from the likelihood of whiplash and other injuries. The height of your driver’s seat is adjustable. To raise the seat, repeatedly pull up the lever on the outside of the seat cushion.
09/07/02 16:42:31 31SNA640_100 Seats Front RELEASE BUTTON SEAT-BACK Adjusting the Head Restraint The head restraints adjust for height. You need both hands to adjust a restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.
09/07/02 16:42:42 31SNA640_101 Seats Active Head Restraints against the likelihood of whiplash and injuries to the neck and upper spine. After a collision, the activated restraint should return to its normal position. If the restraints do not return to their normal position, or in the event of a severe collision, have the vehicle inspected by a Honda dealer. The driver’s and front passenger’s seats have active head restraints.
09/07/02 16:42:52 31SNA640_102 Seats Armrest Folding Rear Seat The back of the rear seat folds down, giving you direct access to the trunk. The seat-back is released from inside the trunk. On DX, U.S. LX, LX-S, and Canadian DX-G models The seat-back can be folded down as one piece. CONTINUED 97 Instruments and Controls If equipped To use the console lid as an armrest, slide it to one of its three positions. On EX-L, Si, U.S.
09/07/02 16:43:00 31SNA640_103 Seats GUIDE CENTER SHOULDER BELT On EX-L, Si, U.S. EX, and Canadian Sport models The left and right seat-backs can be folded separately from inside the trunk. When storing cargo, you can move the rear center shoulder belt out of the way by removing the belt from the guide. Pull RELEASE To release the seat-back, pull the release under the trunk panel. Push the seat-back down, then let go of the release.
09/07/02 16:43:06 31SNA640_104 Seats Make sure that the folded seat-back does not press against the front passenger’s seat, as this could cause the weight sensors to work improperly. Instruments and Controls Make sure all rear shoulder belts are positioned in front of the rear seatback, and the center shoulder belt is re-positioned in the guide whenever the seat-back is in its upright position. Be sure there are no twists in any shoulder belt.
09/07/02 16:43:18 31SNA640_105 Seat Heaters In the HI setting, the heater turns off when the seat gets warm, and turns back on after the seat’s temperature drops. Passenger’s Seat In the LO setting, the heater runs continuously. It does not cycle with temperature changes. Follow these precautions whenever you use the seat heaters: HEATERS Driver’s Seat On EX-L model Both front seats are equipped with seat heaters.
09/07/02 16:43:28 31SNA640_106 Power Windows window, pull or push the window switch briefly. DRIVER’S WINDOW SWITCH Closing a power window on someone’s hands or fingers can cause serious injury. Turn the ignition switch to the ON (II) position to raise or lower any window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.
09/07/02 16:43:38 31SNA640_107 Moonroof If equipped MOONROOF SWITCH Turn the ignition switch to the ON (II) position before operating the moonroof switch on the ceiling console. To open the moonroof fully, pull back the moonroof switch firmly. The moonroof opens all the way. To stop the moonroof from opening fully, briefly move the switch in either direction. To tilt the moonroof, push the center of the moonroof switch straight up.
09/07/02 16:43:49 31SNA640_108 Moonroof, Mirrors If you try to open the moonroof in below-f reezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or motor. Auto Reverse If the moonroof runs into any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the moonroof, remove the obstacle, then use the moonroof switch again. Mirrors TAB Auto reverse stops sensing when the moonroof is almost closed.
09/07/02 16:44:00 31SNA640_109 Mirrors Adjusting the Power Mirrors SELECTOR SWITCH Heated Mirrors ADJUSTMENT SWITCH HEATED MIRROR BUTTON On all models except U.S. DX 1. Turn the ignition switch to the ON (II) position. 2. Move the selector switch to L (driver’s side) or R (passenger’s side). 104 3. Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down. 4. When you finish, move the selector switch to the center (off) position.
09/07/02 16:44:11 31SNA640_110 Parking Brake, Interior Lights Parking Brake Ceiling Light DOOR ACTIVATED ON OFF PARKING BRAKE LEVER To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the lever. The parking brake indicator on the instrument panel should go out when the parking brake is fully released (see page 59 ). The ceiling light has a three-position switch; ON (right), Door Activated, and OFF (left).
09/07/02 16:44:22 31SNA640_111 Interior Lights After all doors are closed tightly, the light(s) dims slightly, then fades out in about 30 seconds. SWITCHES If you do not open any door after you unlock the driver’s door or remove the key from the ignition switch, the light(s) fades out in about 30 seconds. If you leave any door open without the key in the ignition switch, the ceiling light(s) will go off after 3 minutes. OFF DOOR ACTIVATED On models with moonroof On U.S.
09/07/02 16:44:31 31SNA640_112 Interior Lights, Interior Convenience Items Courtesy Light Interior Convenience Items COURTESY LIGHT CONSOLE COMPARTMENT CENTER POCKET COIN BOX VANITY MIRROR On Canadian Si model The courtesy light between the spotlights comes on when you turn the parking lights on. To adjust its brightness, push the instrument panel brightness control buttons under the driver’s side vent with the ignition switch in the ON (II) position.
09/07/02 16:44:46 31SNA640_113 Interior Convenience Items Beverage Holders Be careful when you are using the beverage holders. A spilled liquid that is very hot can scald you or your passengers. Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior. The EX, EX-L, and Si models without navigation system have another accessory power socket in the center console compartment.
09/07/02 16:44:54 31SNA640_114 Features The heating and air conditioning* systems in your vehicle provide a comfortable driving environment in all weather conditions. * Air conditioning is optional on DX model. If equipped Your vehicle has an anti-theft audio system that requires a code number to enable it. All U.S. models except DX The security system helps to discourage vandalism and theft of your vehicle. Playing a USB Flash Memory Device .....................................
09/07/02 16:45:06 31SNA640_115 Vents, Heating, and A/C Fan Control Dial Turn the dial clockwise to increase the fan speed and airflow. Turn the dial counterclockwise to decrease them. TEMPERATURE CONTROL DIAL FAN CONTROL DIAL MODE BUTTONS Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. Air Conditioning (A/C) Button If equipped This button turns the air conditioning on and off. The indicator in the button is on when the A/C is on.
09/07/02 16:45:30 31SNA640_116 Vents, Heating, and A/C The outside air intakes for the heating and cooling system are at the base of the windshield. Keep this area clear of leaves and other debris. Switch to recirculation mode when driving through dusty or smoky conditions, then return to fresh air mode. Rear Window Defogger Button This button turns the rear window defogger off and on (see page 76 ). Mode Control Use the mode control buttons to select the vents air flows from.
09/07/02 16:45:48 31SNA640_117 Vents, Heating, and A/C Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. to maximum cool. . 3. Select 4. If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode. 5. Set the fan to the desired speed. . 1. Select 2. Set the fan to the desired speed. 3. Adjust the warmth of the air with the temperature control dial.
09/07/02 16:46:02 31SNA640_118 Vents, Heating, and A/C To Defog and Defrost To remove fog from the inside of the windows: To Remove Exterior Frost or Ice From the Windows . When you select 1. Select , the system automatically switches to fresh air mode and turns on the A/C (if equipped). The A/C indicator will not come on, if it was previously off. . 2. Select 3. Set the fan and temperature controls to maximum level.
09/07/02 16:46:11 31SNA640_119 Audio System An audio system is standard on all models except the U.S. DX. Read the appropriate pages (as shown below) to use your vehicle’s audio system. EX-L, Si, U.S. LX, LX-S, EX, Canadian DX, DX-G, and Sport models without navigation system U.S. EX, EX-L, and Si models with navigation system For vehicles without navigation system, see pages 115 through 148 . For vehicles with navigation system, see pages 149 through 198 .
09/07/02 16:46:24 31SNA640_120 Audio System (Models without navigation system) Si model only Your audio system shows a welcome message on the display when you turn the ignition switch to the ACCESSORY (I) or the ON (II) position. To select a character: SEEK BUTTON 3. Turn the TUNE knob to change a letter. 1. Make sure the audio system is off. 2. Push and hold the TUNE knob, then push the power/volume knob on the audio control panel. You will see the first letter blinking.
09/07/02 16:46:31 31SNA640_121 Audio System (Models without navigation system) Playing the Radio ST INDICATOR AM/FM BUTTON AUTO SELECT BUTTON The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the PWR/VOL knob or the AM/FM button. Adjust the volume by turning the same knob. The band and frequency that the radio was last tuned to is displayed. To change bands, press the AM/FM button.
09/07/02 16:46:44 31SNA640_122 Audio System (Models without navigation system) To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select. SEEK − The SEEK function searches up and down from the current frequency to find a station with a strong signal. To activate it, press the or side of the SEEK button, then release it.
09/07/02 16:46:54 31SNA640_123 Audio System (Models without navigation system) AUTO SELECT − If you are traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button. ‘‘A.SEL’’ flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.
09/07/02 16:47:01 31SNA640_124 Audio System (Models without navigation system) Treble/Bass − Use the TREBLE/ BASS modes to adjust the tone to your liking. Audio System Lighting You can use the instrument panel brightness control buttons to adjust the illumination of the audio system (see page 75 ). The audio system illuminates when the parking lights are on, even if the radio is off. Features Balance/Fader − These two modes adjust the strength of the sound coming from each speaker.
09/07/02 16:47:08 31SNA640_125 Audio System (Models without navigation system) Playing the XM Radio Optional on U.S. EX, EX-L, and Si models Your audio system is capable of receiving XM Radio anywhere in the United States, except Hawaii, Alaska, and Puerto Rico. PWR/VOL KNOB DISPLAY BUTTON SCAN BUTTON AUX BUTTON XM is a registered trademark of Sirius XM Radio , Inc. XM Radio receives signals from two satellites to produce clear, highquality digital reception.
09/07/02 16:47:19 31SNA640_126 Audio System (Models without navigation system) MODE − To switch between channel mode and category mode, press and hold the DISP button until the mode changes. In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category.
09/07/02 16:47:32 31SNA640_127 Audio System (Models without navigation system) SCAN − The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again. 2.
09/07/02 16:47:40 31SNA640_128 Audio System (Models without navigation system) ‘‘ - - - - ’’ − The selected channel number does not exist, or is not part of your subscription, or this channel has no artist or title information at this time. Signal may be blocked by mountains or large obstacles to the south. Signal weaker in these areas. ‘‘ANTENNA’’ − There is a problem with the XM antenna. Please consult your dealer.
09/07/02 16:47:55 31SNA640_129 Audio System (Models without navigation system) Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: Driving on the north side of an east/west mountain road. Driving on the north side of a large commercial truck on an east/west road. Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you. Driving on the lower level of a multi-tiered road.
09/07/02 16:48:04 31SNA640_130 Audio System (Models without navigation system) Playing a Disc LOAD INDICATOR EJECT BUTTON To Play a Disc To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. CD BUTTON REPEAT BUTTON RANDOM BUTTON DISPLAY BUTTON Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. SCAN BUTTON SEEK/SKIP BUTTON PWR/VOL KNOB U.S. Si model is shown.
09/07/02 16:48:22 31SNA640_131 Audio System (Models without navigation system) This audio system can also play CD-Rs and CD-RWs compressed in MP3 or WMA formats. When playing a disc in MP3, you will see ‘‘MP3’’ in the display. In WMA format, ‘‘WMA’’ will appear in the display. A disc can support more than 99 folders, and each folder can hold up to 255 playable files. When there are more than 99 folders on a disc, the center display only shows two digits.
09/07/02 16:48:37 31SNA640_132 Audio System (Models without navigation system) You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the album, artist, and track tag. You will also see some text data under these conditions: When a new folder, file, or track is selected. The display shows up to 16 characters of selected text data (the folder name, file name, etc.).
09/07/02 16:48:47 31SNA640_133 Audio System (Models without navigation system) In MP3 or WMA mode FOLDER SELECTION − To select a different folder, turn the TUNE knob to move to the beginning of the next folder. Turn the knob to the right to skip to the next folder, and to the left to move to the beginning of the current folder. Turn it again to skip to the beginning of the previous folder. Turning the TUNE knob more than one click skips several folders at a time.
09/07/02 16:49:00 31SNA640_134 Audio System (Models without navigation system) Pressing either side of the SEEK/ SKIP button also turns off the scan feature. In MP3 or WMA mode F-SCAN (FOLDER SCAN) − This feature, when activated, samples the first file in each folder on the disc. To activate folder scan, press the SCAN button twice. You will see F-SCAN in the display. The system plays the first file in the first folder for about 10 seconds.
09/07/02 16:49:09 31SNA640_135 Audio System (Models without navigation system) If you turn the system off while a disc is playing, either with the PWR/ VOL knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off. Operating the Optional Disc Changer An optional six or eight disc changer is available for your vehicle. This disc changer uses the same controls used for the in-dash disc player or the radio.
09/07/02 16:49:18 31SNA640_136 Audio System (Models without navigation system) Disc Player Error Messages The chart on the right explains the error messages you may see in the display while playing a disc. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc.
09/07/02 16:49:29 31SNA640_137 Audio System (Models without navigation system) Optional Disc Changer Error Messages The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. If there is still a problem, the error message will appear again.
09/07/02 16:49:35 31SNA640_138 Audio System (Models without navigation system) Playing an iPod On EX-L, Si, U.S. EX, and Canadian Sport models iPod INDICATOR Features AUX BUTTON CD BUTTON DISPLAY BUTTON AM/FM BUTTON TUNE/SOUND KNOB REPEAT BUTTON SEEK/SKIP BUTTON RANDOM BUTTON U.S. Si model is shown.
09/07/02 16:49:42 31SNA640_139 Audio System (Models without navigation system) To Play an iPod This audio system can select and play the audio files on the iPod with the same controls used for the disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be charged with the ignition switch in these positions.
09/07/02 16:49:52 31SNA640_140 Audio System (Models without navigation system) NOTE: Do not connect your iPod using a hub. Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it. We recommend backing up your data before playing it. USB ADAPTER CABLE USB CONNECTOR Features Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device.
09/07/02 16:50:02 31SNA640_141 Audio System (Models without navigation system) DOCK CONNECTOR If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times. If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at www.apple.com/ ipod. USB CONNECTOR 2. Connect your dock connector to the iPod correctly and securely. 3.
09/07/02 16:50:13 31SNA640_142 Audio System (Models without navigation system) To Change or Select Files To Select a File from iPod Menu Use the SKIP bar while an iPod is playing to select passages and change files. To move rapidly within a file, press and hold either side ( or ) of the SEEK/SKIP button. Press the TUNE/ SOUND knob. You can also select a file from any list on the iPod menu: playlists, artists, albums and songs, by using the TUNE/SOUND knob.
09/07/02 16:50:21 31SNA640_143 Audio System (Models without navigation system) To Select Repeat or Shuffle Mode: You can select any type of repeat and shuffle modes by using the RPT and RDM buttons. REPEAT − This feature continuously plays a file. To activate the repeat feature, press the RPT button. You will see ‘‘RPT’’ in the display. To turn it off, press the RPT button again. SHUFFLE ALL − This feature plays all available files in a selected list (playlists, artists, albums or songs) in random order.
09/07/02 16:50:30 31SNA640_144 Audio System (Models without navigation system) To Stop Playing Your iPod To play the radio, press the AM/FM button. Press the CD button to switch to the disc mode (if a disc is loaded). Press the AUX button to switch the audio mode between the XM Radio (if equipped) and iPod. Disconnecting an iPod iPod Error Messages If you see an error message in the display, see page 140 .
09/07/02 16:50:36 31SNA640_145 Audio System (Models without navigation system) iPod Error Messages If you see an error message on the audio display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
09/07/02 16:50:43 31SNA640_146 Audio System (Models without navigation system) Playing a USB Flash Memory Device On EX-L, Si, U.S. EX, and Canadian Sport models USB INDICATOR Features AUX BUTTON CD BUTTON DISPLAY BUTTON AM/FM BUTTON SCAN BUTTON TUNE/FOLDER KNOB REPEAT BUTTON SEEK/SKIP BUTTON RANDOM BUTTON U.S. Si model is shown.
09/07/02 16:50:58 31SNA640_147 Audio System (Models without navigation system) To Play a USB Flash Memory Device This audio system can select and play the audio files on a USB flash memory device with the same controls used for the disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position.
09/07/02 16:51:20 31SNA640_148 Audio System (Models without navigation system) The order of files in USB playback may be different from the order of files displayed in PC or other devices etc. Files are played in the order stored in USB flash memory device. The specifications for compatible AAC files are: −Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.
09/07/02 16:51:30 31SNA640_149 Audio System (Models without navigation system) Connecting a USB Flash Memory Device USB ADAPTER CABLE Text Data Display Function Each time you press the DISP button, the display mode shows you in sequence, the folder name, the file name, the artist tag, the album tag, the track tag and name off (which turns off the text display). USB CONNECTOR USB CONNECTOR 1. Pull out the USB connector from the holder and remove the cable from the clip in the console compartment. 2.
09/07/02 16:51:42 31SNA640_150 Audio System (Models without navigation system) To Change or Select Files Use the SKIP bar while a USB flash memory device is playing to select passages and change files. To move rapidly within a file, press and hold either side ( or ) of the SEEK/SKIP button. To Select Repeat, Random or Scan Mode: You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button. REPEAT − This feature continuously plays a file.
09/07/02 16:51:47 31SNA640_151 Audio System (Models without navigation system) RANDOM − This feature plays the files within a USB flash memory device in random order. To active random play, press the RDM button twice. You will see RDM in the display. Press and release the RDM button to return to normal play. FOLDER-RANDOM − This feature, when activated, plays all files in the selected folder in random order. To activate folder random, press and release the RDM button. You will see F-RDM in the display.
09/07/02 16:51:59 31SNA640_152 Audio System (Models without navigation system) Each time you press and release the SCAN button, the mode changes from file scan to folder scan, then to normal play. To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM button. Press the CD button to switch to the disc mode (if a disc is loaded). Press the AUX button to switch the audio mode between the USB or XM Radio (if equipped).
09/07/02 16:52:06 31SNA640_153 Audio System (Models without navigation system) USB Flash Memory Device Error Messages If you see an error message on the audio display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
09/07/02 16:52:13 31SNA640_154 Audio System (Models with navigation system) Voice Control System The audio system can also be operated by voice control. See the navigation system manual for complete details. Playing the AM/FM Radio FM2 ICON FM1 ICON AM ICON Features AM/FM BUTTON AUTO SELECT ICON AUDIO BUTTON BACKGROUND ICON SOUND ICON SCAN BUTTON TUNE BAR PRESET BUTTONS U.S. Si model is shown.
09/07/02 16:52:25 31SNA640_155 Audio System (Models with navigation system) To Play the AM/FM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob. Pushing the AUDIO button will also turn on the system. The band and frequency that the radio was last tuned to are displayed.
09/07/02 16:52:35 31SNA640_156 Audio System (Models with navigation system) SEEK − The seek function searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the ▲ or ▼ side of the TUNE bar until you hear a beep, then release it. Each preset button’s frequency is shown on the bottom of the audio display. Preset − Each preset button can store one frequency on AM and two frequencies on FM.
09/07/02 16:52:43 31SNA640_157 Audio System (Models with navigation system) AUTO SELECT − If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashing in the display, and the system goes into scan mode for several seconds.
09/07/02 16:52:50 31SNA640_158 Audio System (Models with navigation system) Playing the XM Radio XM RADIO ICON MODE ICON JOYSTICK Features POWER/VOLUME KNOB CHANNEL INDICATOR AM/FM BUTTON XM RADIO BUTTON AUDIO BUTTON SCAN BUTTON PRESET CHANNEL NUMBER U.S. Si model is shown.
09/07/03 09:24:40 31SNA640_159 Audio System (Models with navigation system) Your audio system is capable of receiving XM Radio anywhere in the United States, except Hawaii, Alaska, and Puerto Rico. XM is a registered trademark of Sirius XM Radio , Inc. XM Radio receives signals from two satellites to produce clear, highquality digital reception. It offers many channels in several categories.
09/07/02 16:53:10 31SNA640_160 Audio System (Models with navigation system) TUNE − Press the TUNE bar to change channel selections. Press ▲ for higher numbered channels and ▼ for lower numbered channels. In the category mode, you can only select channels within that category. Preset − You can store up to 12 preset channels using each preset button or preset icons on the screen. Each preset button or icon stores one channel from the XM1 band and one channel from the XM2 band.
09/07/02 16:53:20 31SNA640_161 Audio System (Models with navigation system) 4. Repeat steps 2 and 3 to store the first six channels. To Select a Channel from List 5. Press the XM RADIO button again or touch the other XM icon (XM1 or XM2) on the audio display. Store the next six channels using steps 2 and 3. Once a channel is stored, press and release the proper preset button (icon) to tune to it. Each preset button’s channel is shown on the bottom of the audio display.
09/07/02 16:53:30 31SNA640_162 Audio System (Models with navigation system) To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. XM Radio Display Messages ‘‘LOADING’’ − XM is loading the audio or program information. ‘‘OFF AIR’’ − The channel currently selected is no longer broadcasting. ‘‘ - - - - ’’ − The selected channel number does not exist or is not part of your subscription.
09/07/02 16:53:38 31SNA640_163 Audio System (Models with navigation system) Signal may be blocked by mountains or large obstacles to the south. Signal weaker in these areas. The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas.
09/07/02 16:53:49 31SNA640_164 Audio System (Models with navigation system) Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you. Driving on a single lane road alongside dense trees taller than 50 ft. (15 m) to the south of you. Large items carried on a roof rack. There may be other geographic situations that could affect XM Radio reception.
09/07/02 16:54:05 31SNA640_165 Audio System (Models with navigation system) Adjusting the Sound SPEAKER SETTING BALANCE − Adjusts the side-toside strength of the sound. To adjust the left/right balance, touch the L or R icon. SUBWOOFER − Adjusts the strength of sound from the subwoofer speaker. To adjust the sound strength, touch or on each side of the adjustment bar. SOUND ICON BASS/TREBLE SETTING BASS − Adjusts the bass. You can adjust the sound on the navigation screen.
09/07/02 16:54:12 31SNA640_166 Audio System (Models with navigation system) This function is set to MID as the default setting when the vehicle leaves the factory. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose Hi. Audio System Lighting You can use the instrument panel brightness control buttons to adjust the illumination of the audio system (see page 75 ). The audio system illuminates when the parking lights are on, even if the radio is off.
09/07/02 16:54:18 31SNA640_167 Audio System (Models with navigation system) Playing a Disc CD ICON POWER/VOLUME KNOB JOYSTICK OPEN BUTTON CD BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR REPEAT BUTTON U.S. Si model is shown.
09/07/02 16:54:34 31SNA640_168 Audio System (Models with navigation system) To Play a Disc You operate the disc player with the same controls used for the radio. To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. This audio system can also play CDRs and CD-RWs compressed in MP3 or WMA formats. When playing a disc in MP3, you will see ‘‘MP3’’ on the screen. In WMA format, ‘‘WMA’’ will appear on the screen. You can select up to 99 folders and play up to 999 tracks.
09/07/02 16:54:44 31SNA640_169 Audio System (Models with navigation system) To Load a Disc DISC SLOT OPEN BUTTON The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears. CLOSE BUTTON Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. You cannot load and play 3-inch (8-cm) discs in this system.
09/07/02 16:54:55 31SNA640_170 Audio System (Models with navigation system) Push the AUDIO button beside the screen to show the audio display and operate the disc player. When playing a CD recorded with text data, the track, album, and artist name are shown on the audio display. When playing a disc in MP3 or WMA, the folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes.
09/07/02 16:55:04 31SNA640_171 Audio System (Models with navigation system) In MP3 or WMA mode In MP3 or WMA mode In MP3 or WMA mode FOLDER SELECTION − To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the ▲ side of the TUNE bar to skip to the next folder, and the ▼ side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.
09/07/02 16:55:13 31SNA640_172 Audio System (Models with navigation system) Pressing either SKIP button (preset 5 or 6) also turns off scan. In MP3 or WMA mode FOLDER SCAN − This feature, when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display. The system plays the first file in each folder for about 10 seconds.
09/07/02 16:55:24 31SNA640_173 Audio System (Models with navigation system) When playing a CD recorded with text data, each track name is shown on the audio display. With a disc recorded in MP3 or WMA, the folder number and the location are also displayed. If the disc was not recorded with text data, only the track number is shown. To scroll through the display, touch the ▲ or ▼ icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.
09/07/02 16:55:32 31SNA640_174 Audio System (Models with navigation system) Operating the Optional Disc Changer An optional six or eight disc changer is available for your vehicle. This disc changer uses the same controls used for the in-dash disc player or the radio. Protecting Discs For information on how to handle and protect discs, see page 201 . Features Load the desired discs in the magazine, and load the magazine in the changer according to the instructions that came with the unit.
09/07/02 16:55:44 31SNA640_175 Audio System (Models with navigation system) Disc Player Error Messages The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.
09/07/02 16:55:51 31SNA640_176 Audio System (Models with navigation system) Playing a PC Card TRACK LIST ICON PC CARD ICON POWER/VOLUME KNOB JOYSTICK CD BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR REPEAT BUTTON U.S. Si model is shown.
09/07/02 16:56:08 31SNA640_177 Audio System (Models with navigation system) To Play a PC Card You operate the PC card player with the same controls used for the radio and the disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position. The PC card player reads and plays cards in MP3 or WMA formats. Depending on the format, the screen will indicate ‘‘MP3’’ or ‘‘WMA’’ when a card is playing. The card limit of the player is 99 folders and 999 tracks.
09/07/02 16:56:22 31SNA640_178 Audio System (Models with navigation system) In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file. Loading a PC Card PC CARD SLOT Insert a PC card straight into the slot. The drive will read the PC card and begin to play it. Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.
09/07/02 16:56:35 31SNA640_179 Audio System (Models with navigation system) There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue. To Select a Play Mode FOLDER MODE PLAY MODE ICON MODE INDICATOR Folder mode plays tracks in the order they were added to the card. Artist mode plays tracks in alphabetical order, by artist and song title.
09/07/02 16:56:44 31SNA640_180 Audio System (Models with navigation system) PLAY MODE ICON Features To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display. Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT. After you select the play mode, the display changes to the selectable playing menu.
09/07/02 16:56:52 31SNA640_181 Audio System (Models with navigation system) If you select ‘‘Play a New Track List,’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list. To Change or Select Tracks/Files PRESET BUTTON’S FUNCTION To go back to the previous screen, press the CANCEL button on the right side of the screen. To exit the play mode screens, press the AUDIO button. PRESET BUTTONS U.S. Si model is shown.
09/07/02 16:57:01 31SNA640_182 Audio System (Models with navigation system) FF/REW − To move rapidly within a file, press and hold (preset 4) or (preset 3). FOLDER SELECTION − To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the ▲ side of the TUNE bar to skip the next folder, and press the ▼ side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.
09/07/02 16:57:07 31SNA640_183 Audio System (Models with navigation system) The system then selects and plays files randomly. This continues until you deactivate each random play by pressing the RDM button again, or you select a different folder/artist/ album with the TUNE bar. SCAN − The scan function samples all files on the PC card in the order they are recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display.
09/07/02 16:57:20 31SNA640_184 Audio System (Models with navigation system) Using a Track List FOLDER ICON ARTIST NAME Features TRACK LIST ICON You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display. RETURN ICON To scroll through the display, touch the ▲ or ▼ icon on the side of the screen. To go back to the previous display, touch the Return icon.
09/07/02 16:57:30 31SNA640_185 Audio System (Models with navigation system) Song Search Function ALBUM NAME SONG SEARCH ICON RETURN ICON Folder mode is shown. In album mode, the album name is also displayed on the right side of each selectable icon. Select the desired file. 180 When you select ‘‘Song Search’’ from the track list display, the song search menu appears.
09/07/02 16:57:41 31SNA640_186 Audio System (Models with navigation system) Searching for a Song Title by Keyword MORE ICON To cancel the selected letter, select the letter and touch the Delete icon. To select more characters, touch the More icon. The other character list will be shown. Searching for a Song by Artist Name ARTIST LIST FILE LIST Features DELETE ICON LIST ICON In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen.
09/07/02 16:57:56 31SNA640_187 Audio System (Models with navigation system) Searching for a Song by Album Name ALBUM LIST To Stop Playing a PC Card To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1*, or XM2* icon. If a disc is in the audio unit, press the CD button or touch the CD icon to play the disc. Touch the CARD icon to switch back to the PC card player. *: If equipped Select the Album icon, and the album list appears.
09/07/02 16:58:02 31SNA640_188 Audio System (Models with navigation system) PC Card Error Messages If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message FILE ERROR NO MUSIC The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged.
09/07/02 16:58:08 31SNA640_189 Audio System (Models with navigation system) Playing an iPod iPod INDICATOR USB ICON POWER/VOLUME KNOB JOYSTICK CD BUTTON AUDIO BUTTON SCAN BUTTON REPEAT BUTTON U.S. Si model is shown.
09/07/02 16:58:24 31SNA640_190 Audio System (Models with navigation system) The audio system reads and plays playable sound files on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes. iPod and iTunes are registered trademarks owned by Apple Inc. Voice Control System You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions.
09/07/02 16:58:36 31SNA640_191 Audio System (Models with navigation system) Connecting an iPod USB CONNECTOR DOCK CONNECTOR The current file number and total of the selected playable files are displayed on the screen. It also shows the artist, album and track (file) names on the screen. To Change or Select Files Use the SKIP button while an iPod is playing to change files. USB CONNECTOR USB ADAPTER CABLE 1.
09/07/02 16:58:45 31SNA640_192 Audio System (Models with navigation system) You can also select a file from any list on the iPod menu: playlists, artists, albums and songs. Press the AUDIO button to display the screen, then touch the iPod MENU icon. Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT. CONTINUED 187 Features If you select ‘‘ALL’’ on either the artists or albums list, all available files on the selected list are played.
09/07/02 16:58:56 31SNA640_193 Audio System (Models with navigation system) Using a Track List To Select Repeat or Random Mode: You can select any type of repeat and random mode by using the RPT button or RDM button. TRACK LIST ICON You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display. 188 REPEAT − This feature continuously plays a file.
09/07/02 16:59:10 31SNA640_194 Audio System (Models with navigation system) You can also select another list from the iPod menu while keeping the random function. NOTE: Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system. To Stop Playing Your iPod To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1*, or XM2* icon. Press the CD icon to switch to the disc mode (if a disc is loaded).
09/07/02 16:59:16 31SNA640_195 Audio System (Models with navigation system) iPod Error Messages If you see an error message on the screen while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. 190 Error Message UNSUPPORTED NO SONG Solution Appears when an unsupported iPod is inserted. There is no music information.
09/07/02 16:59:23 31SNA640_196 Audio System (Models with navigation system) Playing a USB Flash Memory Device WMA/MP3 INDICATOR USB ICON Features POWER/VOLUME KNOB JOYSTICK CD BUTTON AUDIO BUTTON SCAN BUTTON TUNE FOLDER BAR REPEAT BUTTON U.S. Si model is shown.
09/07/02 16:59:35 31SNA640_197 Audio System (Models with navigation system) To Play a USB Flash Memory Device This audio system can select and play the audio files from a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon.
09/07/02 16:59:57 31SNA640_198 Audio System (Models with navigation system) Depending on the type of encoding and writing software used, there may be cases where character information does not display properly. The specifications for compatible MP3 files are: −Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.
09/07/02 17:00:06 31SNA640_199 Audio System (Models with navigation system) Some versions of MP3, WMA, or AAC format may not be supported. If an unsupported file is found, the audio unit displays UNSUPPORTED, then skips to the next file. Connecting a USB Flash Memory Device USB CONNECTOR In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE FILE, and then skips to the next file.
09/07/02 17:00:18 31SNA640_200 Audio System (Models with navigation system) To Change or Select Files Using a Track List Use the SKIP button while a USB flash memory device is playing to change files. FF/REW − To move rapidly within a file, press and hold (preset 4) or (preset 3). FOLDER SELECTION − To select a different folder, press either side of the TUNE bar. Press the ▲ side to skip to the next folder, and press the ▼ side to skip to the beginning of the previous folder.
09/07/02 17:00:27 31SNA640_201 Audio System (Models with navigation system) To Select Repeat, Random or Scan Mode: You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button. TRACK REPEAT − This feature continuously plays a file. To activate the track repeat feature, press the RPT button (Preset 1). You will see ‘‘TRACK REPEAT’’ in the display. To turn it off, press the RPT button (Preset 1).
09/07/02 17:00:37 31SNA640_202 Audio System (Models with navigation system) *: If equipped If a PC card is in the audio unit, touch the CARD icon to play the PC card. Disconnecting a USB Flash Memory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device’s instructions when you remove it. USB Flash Memory Device Error Messages If you see an error message in the screen, see page 198 .
09/07/02 17:00:42 31SNA640_203 Audio System (Models with navigation system) USB Flash Memory Device Error Messages If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. 198 Error Message UNPLAYABLE FILE UNSUPPORTED NO SONG Solution The system cannot read the file(s). Check the files in the USB flash memory device.
09/07/02 17:00:52 31SNA640_204 AM/FM Radio Reception Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies.
09/07/02 17:00:59 31SNA640_205 AM/FM Radio Reception Electrical interference from passing vehicles and stationary sources can cause temporary reception problems. As required by the FCC: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills.
09/07/02 17:01:12 31SNA640_206 Protecting Your Discs General Information When using CD-R or CD-RW discs, use only high quality discs labeled for audio use. Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems. Handle your discs properly to prevent damage and skipping. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge.
09/07/02 17:01:26 31SNA640_207 Protecting Your Discs Additional Information on Recommended Discs The disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated below, it may become stuck inside and damage the audio unit. Examples of these discs are shown to the right: 1. Bubbled, wrinkled, labeled, and excessively thick discs Bubbled/ Wrinkled With Label/ Sticker 2. Damaged discs Chipped/ Cracked 202 Using Printer Label Kit Sealed 3.
09/07/02 17:01:39 31SNA640_208 Protecting Your Discs 4. Small, irregular shaped discs 5. Discs with scratches, dirty discs Recommended discs are printed with the following logo. Features 3-inch (8-cm) CD Triangle Shape Fingerprints, scratches, etc. Audio unit may not play the following formats. CD-R or CD-RW may not play due to the recording conditions. Scratches and fingerprints on the discs may cause the sound to skip.
09/07/02 17:01:50 31SNA640_209 Remote Audio Controls CH BUTTON MODE BUTTON The MODE button changes the mode. On vehicles with navigation system Pressing the MODE button repeatedly cycles through all possible media sources whether they are present or not. On vehicles without navigation system VOL BUTTON If equipped Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel.
09/07/02 17:01:59 31SNA640_210 Remote Audio Controls, Auxiliary Input Jack If you are playing a PC card, press the top (+) of the CH button to advance to the next file. Press the bottom (−) to go back to the previous file. Auxiliary Input Jack On models with audio system When a compatible audio unit is connected to the jack, press the AUX button to select it. In MP3 or WMA mode, you can use the seek function to select folders.
09/07/02 17:02:06 31SNA640_211 Radio Theft Protection On models with audio system Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific 5 digit code using the preset buttons (icon on vehicle’s with navigation system). Because there are hundreds of number combinations possible from specific digits, making the system work without knowing the exact code is nearly impossible.
09/07/02 17:02:16 31SNA640_212 Setting the Clock On models without navigation system CLOCK BUTTON To set the time, press the CLOCK (AM/FM) button until the displayed time begins to blink, then release the button. Features Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time. Press the CLOCK (AM/FM) button again to enter the set time.
09/07/02 17:02:27 31SNA640_213 Security System If equipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights (low beam), parking lights, side marker lights, and taillights flash if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then it stops. To reset an activated system before the 2 minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.
09/07/02 17:02:37 31SNA640_214 Cruise Control If equipped Improper use of the cruise control can lead to a crash. Use the cruise control only when traveling on open highways in good weather. Using the Cruise Control CRUISE BUTTON RES/ACCEL BUTTON CANCEL BUTTON SET/DECEL BUTTON 1. Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on. 3. Press and release the SET/ DECEL button on the steering wheel.
09/07/02 17:02:50 31SNA640_215 Cruise Control Changing the Set Speed You can increase the set cruising speed in any of these ways: Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button. To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h). Push on the accelerator pedal until you reach the desired cruising speed, then press the SET/ DECEL button.
09/07/02 17:02:59 31SNA640_216 Cruise Control Canceling Cruise Control CRUISE BUTTON You can cancel cruise control in any of these ways: Features CANCEL BUTTON Resuming the Set Speed When you push the CANCEL button, or tap the brake or clutch pedal, the system will remember the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h), and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on.
09/07/02 17:03:12 31SNA640_217 Bluetooth HandsFreeLink On models with navigation system Bluetooth HandsFreeLink (HFL) allows you to place and receive phone calls using voice commands, without handling your cell phone. To use HFL, you need a Bluetoothcompatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: In the U.S., visit handsfreelink.honda. com or call (888) 528-7876. In Canada, visit www.honda.ca, or call (888) 9-HONDA-9.
09/07/02 17:03:21 31SNA640_218 Bluetooth HandsFreeLink Many commands can be spoken together. For example, you can say ‘‘Call 123-456-7890’’ or ‘‘Dial Peter.’’ Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted. When HFL is in use, navigation voice commands cannot be recognized. Help Features To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.
09/07/02 17:03:32 31SNA640_219 Bluetooth HandsFreeLink Information Display BLUETOOTH INDICATOR HFL MESSAGE A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on. 214 On the map screen, you will see a ‘‘HFL’’ message on the screen. However, when the current street is shown, and AUDIO INFO icon is visible, ‘‘HFL’’ will not appear when there is an incoming call.
09/07/02 17:03:39 31SNA640_220 Bluetooth HandsFreeLink How to Use HFL The ignition switch must be in the ACCESSORY (I) or ON (II) position.
09/07/02 17:03:46 31SNA640_221 Bluetooth HandsFreeLink ‘‘Redial’’ Redial the last number called (See page 222) ‘‘Transfer’’ Transfer a call from HFL to your phone, or from your phone to HFL (See page 224) ‘‘Mute’’ Mute your voice to the person at the other end of the call (See page 225) ‘‘Send’’ Send numbers or names during a call (See page 225) Press HFL Talk button ‘‘Phonebook’’ ‘‘Store’’ Store a phonebook entry (See page 226) ‘‘Edit’’ Edit the number of an existing phonebook entry (See pag
09/07/02 17:03:53 31SNA640_222 Bluetooth HandsFreeLink ‘‘Security’’ ‘‘Change Passcode’’ Change your security passcode (See page 233) ‘‘Call Notification’’ Set how you would like to be notified of an incoming call (See page 233) ‘‘Auto Transfer’’ Press HFL Talk button ‘‘Clear’’ Set calls to automatically transfer from your phone to HFL when you enter the vehicle (See page 233) Clear the system of all paired phones, phonebook entries and security passcode (See page 234) ‘‘Change Language’’ Change la
09/07/02 17:04:06 31SNA640_223 Bluetooth HandsFreeLink To use HFL, you need to pair your Bluetooth-compatible cell phone to the system. Phone Setup This command group is available for paired cell phones. Phone pairing tips You cannot pair your phone while the vehicle is moving. Your phone must be in discovery or search mode to pair. Refer to your phone’s manual. Up to six phones can be paired. Your phone’s battery may drain faster when it is paired to HFL.
09/07/02 17:04:21 31SNA640_224 Bluetooth HandsFreeLink To rename a paired phone: To delete a paired phone: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command. 1. Say ‘‘Phone setup.’’ 1. Say ‘‘Phone setup.’’ 2. Say ‘‘Edit ’’ after the prompts. 2. Say ‘‘Delete’’ after the prompts. 3. If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone. 3.
09/07/02 17:04:35 31SNA640_225 Bluetooth HandsFreeLink To hear which paired phone is currently linked: To change from the currently linked phone to another paired phone: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command. 1. Say ‘‘Phone setup.’’ 1. Say ‘‘Phone setup.’’ 2. Say ‘‘Status’’ after the prompts. 2. Say ‘‘Next phone’’ after the prompts. To change the pairing code setting: Press and release the HFL Talk button before a command. 1.
09/07/02 17:04:49 31SNA640_226 Bluetooth HandsFreeLink Making a Call You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called. During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery. To make a call using a name in the HFL phonebook: Press and release the HFL Talk button before a command. Press and release the HFL Talk button before a command. 1.
09/07/02 17:05:00 31SNA640_227 Bluetooth HandsFreeLink To redial the last number called by HFL: To make a call from an imported phonebook: Press and release the HFL Talk button and say ‘‘Redial.’’ 222 1. Press the INFO button, then select ‘‘Cellular Phonebook .’’ 3. Select a phonebook you want to choose a phone number from. 2. Select ‘‘Search Imported Phonebook .’’ If the phonebook you select is PINprotected, you will need to enter the PIN to access it. See page 230 for more information.
09/07/02 17:05:10 31SNA640_228 Bluetooth HandsFreeLink Features List ICON To search for a specific name in the phonebook, enter the keyword for either the first or last name. 4. Select the name. All the phone numbers stored for that name will be listed. To display all names in the phonebook, select the ‘‘List ’’ option. 5. Select the desired number to call from the list.
09/07/02 17:05:18 31SNA640_229 Bluetooth HandsFreeLink Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on. Press the HFL Talk button to answer the call, or the HFL Back button to hang up. 224 Call Waiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call. To return to the original call, press the HFL Talk button again.
09/07/02 17:05:31 31SNA640_230 Bluetooth HandsFreeLink Muting a Call You can mute your voice to the person you are talking to during a call. To unmute your voice, press and release the HFL Talk button and say ‘‘Mute’’ again. To send a name or number during a call: Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store cannot only be phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.
09/07/02 17:05:48 31SNA640_231 Bluetooth HandsFreeLink To store a phonebook entry: Press and release the HFL Talk button before a command. 1. Say ‘‘Phonebook .’’ NOTE: Avoid using duplicate name entries. Avoid using ‘‘home’’ as a name entry. 4. Say the number you want to store for the name entry. 5. Follow the HFL prompts and say ‘‘Enter’’ to store the entry. 226 1. Say ‘‘Phonebook .’’ 2. Say ‘‘Edit ’’ after the prompts. 2. Say ‘‘Store’’ after the prompts. 3.
09/07/02 17:06:05 31SNA640_232 Bluetooth HandsFreeLink To list all names in the phonebook: Press and release the HFL Talk button before a command. 1. Say ‘‘Phonebook .’’ 1. Say ‘‘Phonebook .’’ 2. Say ‘‘Delete’’ after the prompts. 2. Say ‘‘List ’’ after the prompts. 3. Say the name you want to delete and follow the HFL prompts to complete the deletion. 3. HFL begins reading the names in the order they were stored.
09/07/02 17:06:19 31SNA640_233 Bluetooth HandsFreeLink Cellular Phonebook Import Cellular Phonebook: Search Imported Phonebook: (available on some phones) The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system. Once a phonebook has been imported, you can search the phone numbers by the person’s name. If you select Cellular Phonebook from the Information screen menu, you will see four HFL options.
09/07/02 17:06:35 31SNA640_234 Bluetooth HandsFreeLink Select a person from the list. Up to three category icons are displayed in the left side of the list: Fax Home Car Mobile Voice Work Other Features Preference List ICON If the phonebook is PIN-protected, you will need to enter the 4-digit PIN. To search for a specific name in the phonebook, enter the keyword for either the first or last name. To display all names in the phonebook, select the ‘‘List ’’ option.
09/07/02 17:06:46 31SNA640_235 Bluetooth HandsFreeLink Delete Imported Phonebook: You can delete any imported phonebook. After making a selection, the following screen will appear. PIN Number You can add, change, or remove a PIN number from any phonebook. Select ‘‘Delete Imported Phonebook ,’’ and a list of imported phonebooks will be displayed. Select a phonebook you want to delete. If the phonebook is PINprotected, you will need to enter the 4-digit PIN number.
09/07/02 17:06:56 31SNA640_236 Bluetooth HandsFreeLink To change the PIN to a new number: To remove a PIN: Select ‘‘PIN number,’’ then select ‘‘Do not use PIN’’ after you enter the current PIN. Features Select the phonebook you want. The display will change as shown above. The display will change as shown above. Enter the current PIN for this phonebook. Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.
09/07/02 17:07:04 31SNA640_237 Bluetooth HandsFreeLink System Setup This command group allows you to change or customize HFL basic settings. To set a 4-digit passcode to lock the HFL system for security purposes: Press and release the HFL Talk button before a command. 1. Say ‘‘System setup.’’ 2. Say ‘‘Security’’after the prompts. 3. Follow the HFL prompts and say the 4-digit passcode you want to set. 4. Follow the HFL prompts to confirm the number.
09/07/02 17:07:22 31SNA640_238 Bluetooth HandsFreeLink Press and release the HFL Talk button before a command. To change your security passcode: To select either a ring tone or a prompt as the incoming call notification*: 1. Say ‘‘System setup.’’ Press and release the HFL Talk button before a command. 3. Follow the HFL prompts and say the new 4-digit passcode. 4. Follow the HFL prompts to confirm the number. 1. Say ‘‘System setup.
09/07/02 17:07:37 31SNA640_239 Bluetooth HandsFreeLink To clear the system: Quick Language Selection Change Language This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data. Canadian models only To quickly change the language: Press and release the HFL Talk button before a command. Canadian models only To change the system language between English and French: Press and release the HFL Talk button before a command. 1.
09/07/02 17:07:44 31SNA640_240 Bluetooth HandsFreeLink As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Features Bluetooth Wireless Technology The Bluetooth name and logos are registered trademarks owned by Bluetooth SIG, Inc.
09/07/02 17:07:47 31SNA640_241 236
09/07/02 17:07:51 31SNA640_242 Before Driving Break-in Period .............................. 238 Fuel Recommendation .................. 238 Service Station Procedures .......... 239 Refueling..................................... 239 Opening and Closing the Hood ........................................ 240 Oil Check .................................... 241 Engine Coolant Check .............. 243 Fuel Economy ................................ 244 Accessories and Modifications .... 247 Carrying Cargo .........
09/07/02 17:08:06 31SNA640_243 Break-in Period, Fuel Recommendation Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: Avoid full-throttle starts and rapid acceleration. Fuel Recommendation All models except Si Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher.
09/07/02 17:08:17 31SNA640_244 Fuel Recommendation, Service Station Procedures If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. Refueling Push You may hear a knocking noise from the engine if you drive the vehicle at low engine speed (below about 1,000 rpm) in a higher gear. To stop this, raise the engine speed by shifting to a lower gear. Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors.
09/07/02 17:08:27 31SNA640_245 Service Station Procedures 3. Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door. 4. Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes.
09/07/02 17:08:41 31SNA640_246 Service Station Procedures Oil Check DIPSTICK SUPPORT ROD 2. Put your fingers under the front edge of the hood near the center. Slide your hand to the left until you feel the hood latch handle. Push this handle up to release it. Lift up the hood. If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated. GRIP Except Si 3.
09/07/02 17:08:49 31SNA640_247 Service Station Procedures DIPSTICK Except Si Si UPPER MARK LOWER MARK Si UPPER MARK LOWER MARK 4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. 242 If it is near or below the lower mark, see Adding Engine Oil on page 290 .
09/07/02 17:08:57 31SNA640_248 Service Station Procedure Engine Coolant Check MAX MIN Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 294 for information on adding the proper coolant. MAX Si RESERVE TANK Before Driving Except Si RESERVE TANK MIN Refer to Owner’s Maintenance Checks on page 286 for information about checking other items on your vehicle.
09/07/02 17:09:08 31SNA640_249 Fuel Economy Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle.
09/07/02 17:09:25 31SNA640_250 Fuel Economy Use the recommended viscosity motor oil, displaying the API Certification Seal (see page 290). Maintain proper tire inflation − An underinflated tire increases ‘‘rolling resistance,’’ which reduces fuel economy. Avoid carrying excess weight in your vehicle − It puts a heavier load on the engine, increasing fuel consumption. Drive Efficiently Drive moderately − Rapid acceleration, abrupt cornering, and hard braking increase fuel consumption.
09/07/02 17:09:37 31SNA640_251 Fuel Economy Minimize the use of the air conditioning system − The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. Plan and combine trips − Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.
09/07/02 17:09:49 31SNA640_252 Accessories and Modifications Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability.
09/07/02 17:09:59 31SNA640_253 Accessories and Modifications Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability. Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS)*.
09/07/02 17:10:11 31SNA640_254 Carrying Cargo Your vehicle has several convenient storage areas: DOOR POCKETS TRUNK CENTER POCKET Glove box Door and seat-back pockets * Console compartment Trunk, including the rear seats when folded down Center pocket However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
09/07/02 17:10:21 31SNA640_255 Carrying Cargo Load Limits The maximum load for your vehicle is 850 lbs (385 kg) for U.S. models and 395 kg for Canadian models. See Tire And Loading Information label attached to the driver’s doorjamb. Label Example 250 This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
09/07/02 17:10:37 31SNA640_256 Carrying Cargo (5)Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
09/07/02 17:10:47 31SNA640_257 Carrying Cargo Carrying Items in the Passenger Compartment Store or secure all items that could be thrown around and hurt someone during a crash. Carrying Cargo in the Trunk Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible. Do not put any items on top of the trunk panel. They can block your view and be thrown around the vehicle during a crash.
09/07/02 17:10:51 31SNA640_258 Driving This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer. 253 Driving Driving Guidelines ......................... 254 Preparing to Drive ........................
09/07/02 17:10:58 31SNA640_259 Driving Guidelines Because of the low-profile tires fitted to your vehicle, the alloy wheels are closer to the ground. Driving over a pothole or road debris at too high a speed can seriously damage a wheel. Slow down under these conditions. Si model Your vehicle is designed to give you optimum handling and performance on well-maintained roads. As part of this design, your vehicle has a minimum of ground clearance and very low-profile tires.
09/07/02 17:11:11 31SNA640_260 Preparing to Drive You should do the following checks and adjustments every day before you drive your vehicle. 4. Check that any items you may be carrying are stored properly or fastened down securely. 9. Fasten your seat belt. Check that your passengers have fastened their seat belts (see page 14 ). 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 5. Check the seat adjustment (see page 93 ). 10.
09/07/02 17:11:21 31SNA640_261 Starting the Engine 1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. Automatic transmission: Make sure the shift lever is in Park. Press on the brake pedal. 256 4. Without touching the accelerator pedal, turn the ignition key to the START (III) position.
09/07/02 17:11:30 31SNA640_262 Manual Transmission cause your clutch to wear out faster. The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse. Si On vehicles with 6-speed manual transmission, the lockout system prevents you from shifting directly from any forward gear to reverse while the vehicle is moving at a certain speed (see page 259 ).
09/07/02 17:11:40 31SNA640_263 Manual Transmission When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the engine speed will not go into the tachometer’s red zone in the lower gear. Rapid slowing or speeding up can cause loss of control on slippery surfaces. If you crash, you can be injured.
09/07/02 17:11:54 31SNA640_264 Manual Transmission Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.
09/07/02 17:12:02 31SNA640_265 Automatic Transmission Shift Lever Position Indicators If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible. Shifting SHIFT LEVER RELEASE BUTTON These indicators on the instrument panel show which position the shift lever is in.
09/07/02 17:12:12 31SNA640_266 Automatic Transmission To shift from: P to R Press the shift lever release button. Move the shift lever. Park (P) − This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.
09/07/02 17:12:22 31SNA640_267 Automatic Transmission Drive (D3) − This position is similar to D, except only the first three gears are selected. Use D3 when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third, fourth, and fifth gears in stop-and-go driving. Second (2) − To shift to second, press the release button on the front of the shift lever. This position locks the transmission in second gear.
09/07/02 17:12:35 31SNA640_268 Automatic Transmission Shift Lock Release Do this if pushing on the brake pedal and pressing the release button does not let you shift the transmission out of Park: RELEASE BUTTON 1. Set the parking brake. 2. Remove the key from the ignition switch. NOTCH COVER 4. Insert the built-in key into the shift lock release slot. 5. Push down on the key while you press the release button on the shift lever and move the lever out of Park to neutral. SHIFT LOCK RELEASE SLOT 6.
09/07/02 17:12:47 31SNA640_269 Parking Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. Parking Tips Make sure the moonroof (if equipped) and the windows are closed. Turn off the lights. If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.
09/07/02 17:12:55 31SNA640_270 Braking System Your vehicle is equipped with front disc brakes. The brakes on the rear wheels may be disc or drum, depending on the model. A power assist helps reduce the effort needed on the brake pedal. The anti-lock brake system (ABS) helps you retain steering control when braking very hard. Braking System Design The hydraulic system that operates the brakes has two separate circuits.
09/07/02 17:13:05 31SNA640_271 Anti-lock Brakes (ABS) The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it. The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading. You should never pump the brake pedal.
09/07/02 17:13:14 31SNA640_272 Anti-lock Brakes (ABS) Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with the steering control during braking. Test your brakes as instructed on page 341 . If the brakes feel normal, drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.
09/07/02 17:13:25 31SNA640_273 Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System If equipped The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine’s output and by selectively applying the brakes.
09/07/02 17:13:37 31SNA640_274 Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System VSA OFF Switch When VSA is off, the VSA activation indicator comes on as a reminder. Press and hold the switch again. It turns the system back on. In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off.
09/07/02 17:13:48 31SNA640_275 Tire Pressure Monitoring System (TPMS) U.S. models only Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving. Each tire has its own pressure sensor (not including the spare tire). If the air pressure of a tire becomes significantly low while driving, the sensor in that tire immediately sends a signal that causes the low tire pressure indicator to come on.
09/07/02 17:13:59 31SNA640_276 Tire Pressure Monitoring System (TPMS) Refer to page 314 for tire inflation guidelines. Although your tire pressure is monitored, you must manually check the tire pressures monthly. information label and in the owner’s manual (see page 315 ). Tire Pressure Monitoring System (TPMS) Indicator This indicator comes on and stays on if there is a problem with the tire pressure monitoring system.
09/07/02 17:14:10 31SNA640_277 Tire Pressure Monitoring System (TPMS) Changing a Tire with TPMS If you have a flat tire, the low tire pressure indicator will come on. Replace the flat tire with the compact spare tire (see page 326 ). Each wheel (except the compact spare tire wheel) is equipped with a tire pressure sensor mounted inside the tire behind the valve stem. You must use TPMS specific wheels. It is recommended that you always have your tires serviced by your dealer or qualified technician.
09/07/02 17:14:18 31SNA640_278 Towing a Trailer Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section. Check the loading of your vehicle and trailer carefully before starting to drive. Total Trailer Weight: The maximum allowable weight of the trailer and everything in or on it must not exceed 1,000 lbs (450 kg).
09/07/02 17:14:31 31SNA640_279 Towing a Trailer To achieve a proper tongue load, start by loading 60% of the load toward the front of the trailer and 40% toward the rear, then re-adjust the load as needed. Gross Vehicle Weight Rating (GVWR): The maximum allowable weight of the vehicle, all occupants, all accessories, all cargo, and the tongue load is: (DX, U.S. LX, LX-S, Canadian DX-G) 3,671 lbs (1,665 kg) (EX-L, U.S.
09/07/02 17:14:41 31SNA640_280 Towing a Trailer Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow. Trailer Brakes There are two common types of trailer brakes: surge and electric. Surge brakes are common for boat trailers, since the brakes will get wet. Safety Chains Always use safety chains when you tow a trailer.
09/07/02 17:14:49 31SNA640_281 Towing a Trailer Trailer Lights Additional Towing Equipment Trailer lights and equipment must comply with federal, state, provincial, territorial, and local regulations. Check with your local trailer dealer or rental agency for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle. Many states and Canadian provinces/territories require special outside mirrors when towing a trailer.
09/07/02 17:15:03 31SNA640_282 Towing a Trailer Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following: The vehicle has been properly serviced, and the suspension, cooling system, and lights are in good operating condition. The hitch, safety chains, and any other attachments are secure. All items in or on the trailer are properly secured and cannot shift while you drive.
09/07/02 17:15:15 31SNA640_283 Towing a Trailer Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques. For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines below.
09/07/02 17:15:23 31SNA640_284 Maintenance This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.
09/07/02 17:15:36 31SNA640_285 Maintenance Safety All service items not detailed in this section should be performed by a certified technician or qualified mechanic. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off. To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
09/07/02 17:15:44 31SNA640_286 Maintenance Minder Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer perform engine oil replacement and indicated maintenance service. Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.
09/07/02 17:15:51 31SNA640_287 Maintenance Minder MAINTENANCE MINDER INDICATOR MAINTENANCE ITEM CODE (S) SERVICE MESSAGE ENGINE OIL LIFE INDICATOR If the remaining engine oil life is 15 to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.
09/07/02 17:16:02 31SNA640_288 Maintenance Minder The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page 284 ). You can switch the display to the odometer, the trip meter, and the outside temperature indicator (if equipped) by pushing the SEL/ RESET button on the dashboard repeatedly. NEGATIVE DISTANCE TRAVELED When you see this message, have the indicated maintenance performed by your dealer as soon as possible.
09/07/02 17:16:15 31SNA640_289 Maintenance Minder You can change the information display from the engine oil life display to the odometer, the trip meter, or the outside temperature (if equipped) every time you press and release the SEL/RESET button. Maintenance Main Items and Sub Items MAINTENANCE MAIN ITEM When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ( ) remains on even if you change the information display.
09/07/02 17:16:24 31SNA640_290 Maintenance Minder Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed. 4. Press the SEL/RESET button for more than 5 seconds.
09/07/02 17:16:38 31SNA640_291 Maintenance Minder However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log.
09/07/02 17:16:47 31SNA640_292 Maintenance Minder Symbol A B * 1 : If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year. Symbol 1 2 3 4 5 Maintenance Sub Items Rotate tires Replace air cleaner element If you drive in dusty conditions, replace every 15,000 miles (24,000 km).
09/07/02 17:16:53 31SNA640_293 Fluid Locations Except Si model ENGINE OIL FILL CAP ENGINE OIL DIPSTICK (Orange loop) BRAKE FLUID (Black cap) CLUTCH FLUID (Manual Transmission only) (Light gray cap) POWER STEERING FLUID* (Red cap) WASHER FLUID (Blue cap) AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) ENGINE COOLANT RESERVOIR * : Except Canadian DX-G with manual transmission 288 RADIATOR CAP
09/07/02 17:16:57 31SNA640_294 Fluid Locations Si model ENGINE OIL DIPSTICK (Orange handle) ENGINE OIL FILL CAP BRAKE FLUID (Black cap) CLUTCH FLUID (Light gray cap) WASHER FLUID (Blue cap) Maintenance ENGINE COOLANT RESERVOIR RADIATOR CAP 289
09/07/02 17:17:07 31SNA640_295 Adding Engine Oil ENGINE OIL FILL CAP Except Si Unscrew and remove the engine oil fill cap on the valve cover. Pour the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment. 290 ENGINE OIL FILL CAP Si Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick.
09/07/02 17:17:19 31SNA640_296 Adding Engine Oil Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’ Si model: The oil viscosity or weight is provided on the container’s label. All models except Si: Honda Motor Oil is the preferred 5W-20 lubricant for your vehicle. 5W-20 oil is formulated for yearround protection of your vehicle, to improve cold weather starting and fuel economy. Ambient Temperature Engine Oil Additives Your vehicle does not require any oil additives.
09/07/02 17:17:27 31SNA640_297 Changing the Engine Oil and Filter Always change the oil and filter according to the maintenance messages shown on the information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly. Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service stationtype hydraulic lift for this service.
09/07/02 17:17:41 31SNA640_298 Changing the Engine Oil and Filter 6. Refill the engine with the recommended oil. Engine oil change capacity (including filter): OIL FILTER Except Si 3.9 US qt (3.7 ) Si 4.6 US qt (4.4 ) Except Si Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter. 4. Install a new oil filter according to the instructions that come with it.
09/07/02 17:17:49 31SNA640_299 Changing the Engine Oil and Filter, Engine Coolant 9. Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil. Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.
09/07/02 17:17:56 31SNA640_300 Engine Coolant If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
09/07/02 17:18:06 31SNA640_301 Engine Coolant RADIATOR CAP Si 3. Remove the radiator cap by pushing down and turning counterclockwise. RESERVE TANK Except Si 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. 5. Put the radiator cap back on, and tighten it fully. 296 RESERVE TANK Si 6.
09/07/02 17:18:15 31SNA640_302 Windshield Washers Check the fluid level in the windshield washer reservoir at least monthly during normal use. LEVEL GAUGE LEVEL GAUGE Si Check the fluid level by removing the cap and looking at the level gauge. On Canadian models: The low washer level indicator comes on when the level is low (see page 64 ). Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir.
09/07/02 17:18:28 31SNA640_303 Transmission Fluid 5. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks. Automatic Transmission DIPSTICK UPPER MARK LOWER MARK Check the fluid level with the engine at normal operating temperature. 1. Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine.
09/07/02 17:18:41 31SNA640_304 Transmission Fluid Manual Transmission 6. Insert the dipstick all the way back into the transmission securely as shown in the illustration. The automatic transmission should be drained and refilled with new fluid when this service is indicated by a maintenance message on the information display. If you are not sure how to add fluid, contact your dealer.
09/07/02 17:18:53 31SNA640_305 Transmission Fluid, Brake and Clutch Fluid The manual transmission should be drained and refilled with new fluid when this service is indicated by a maintenance message on the information display. If you are not sure how to check and add fluid, contact your dealer. Brake and Clutch Fluid Check the brake fluid level in the reservoirs monthly. MAX Replace the brake fluid according to the time recommendations in the maintenance minder schedule.
09/07/02 17:19:05 31SNA640_306 Brake and Clutch Fluid, Power Steering Fluid Clutch Fluid Power Steering Fluid Manual Transmission only All models except Si and Canadian DX-G with manual transmission UPPER LEVEL Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible. MAX A low fluid level can indicate a leak in the clutch system.
09/07/02 17:19:13 31SNA640_307 Lights Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects.
09/07/02 17:19:25 31SNA640_308 Lights 4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. BULB Low Beam Headlight HOLDING CLIP 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Turn on the headlights to test the new bulb. TAB 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 1.
09/07/02 17:19:36 31SNA640_309 Lights 5. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. SOCKET Replacing the Front Side Marker/ Parking/Turn Signal Light Bulb HOLDING CLIP 6. Push the electrical connector back onto the bulb. Make sure it is on all the way. 7. Turn on the headlights to test the new bulb. TAB 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4.
09/07/02 17:19:50 31SNA640_310 Lights 4. Remove the bulb from the socket by pushing the bulb in and turning it counterclockwise until it unlocks. Replacing Rear Bulbs (In Fenders) FASTENER 5. Install the new bulb in the socket. Turn it clockwise to lock it in place. 6. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 7. Test the lights to make sure the new bulb is working. 3.
09/07/02 17:20:04 31SNA640_311 Lights Replacing Rear Bulbs (in Trunk Lid) BULB BULBS SOCKETS SOCKETS BULB 3. Remove the socket by turning it one-quarter turn counterclockwise. 6. Test the lights to make sure the new bulb is working. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 7. Reinstall the trunk lining. Make sure it is installed under the edge of the trunk seal. 5.
09/07/02 17:20:17 31SNA640_312 Lights BULB 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. Replacing a High-mount Brake Light Bulb 5. Insert the socket back into the light assembly. Turn it clockwise to lock it in place. 6. Test the lights to make sure the new bulb is working. BULB 7. On all EX-L, Canadian Sport, and Si models 3. Remove the socket by turning it one-quarter turn counterclockwise. SOCKET Except Si model 8.
09/07/02 17:20:26 31SNA640_313 Lights Replacing a Fog Light Bulb On Si model Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. Halogen light bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The fog lights were properly aimed when your vehicle was new.
09/07/02 17:20:38 31SNA640_314 Lights, Cleaning the Seat Belts 6. Turn on the fog lights to test the new bulb. TAB Cleaning the Seat Belts LOOP CONNECTOR 7. Align the two tabs on the fog light assembly with the holes in the bumper, then push the fog light assembly into place. Tighten the screw securely. BULB TAB 4. Install the new bulb, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector onto the bulb. Make sure it is on all the way.
09/07/02 17:20:48 31SNA640_315 Floor Mats, Dust and Pollen Filter Floor Mats If you remove the driver’s floor mat, make sure to re-anchor it when you put it back in your vehicle. If you use non-Honda floor mats, make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats. If equipped The driver’s floor mat that came with your vehicle hooks over the floor mat anchors.
09/07/02 17:20:58 31SNA640_316 Wiper Blades Check the condition of the wiper blades at least every 6 months. Replace them if you find signs of cracking in the rubber, and areas that are getting hard or if they leave streaks and unwiped areas when used. WIPER ARMS 1. Lift the wiper arm off the windshield, raising the driver’s side first, then the passenger’s side. 2.
09/07/02 17:21:07 31SNA640_317 Wiper Blades WIPER ARM BLADE 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. REINFORCEMENT BLADE TOP Pivot the blade assembly toward the wiper arm until it releases from the wiper arm. 3. Remove the blade from its holder by grabbing the tabbed end of the blade.
09/07/02 17:21:19 31SNA640_318 Wiper Blades, Wheels 6. Slide the wiper blade assembly onto the wiper arm. Push down the lock tab. Make sure the wiper blade assembly locks in place. TAB 7. Lower the wiper arm down against the windshield, the passenger’s side first, then the driver’s side. INDENT If equipped Aluminum alloy wheels have a protective clear-coat that keeps the aluminum from corroding and tarnishing.
09/07/02 17:21:31 31SNA640_319 Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated. The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced. Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
09/07/02 17:21:51 31SNA640_320 Tires If you check air pressures when the tires are hot (driven for several miles/kilometers), you will see readings 4 to 6 psi (30 to 40 kPa, 0.3 to 0.4 kgf/cm ) higher than the cold readings. This is normal. Do not let air out to match the recommended cold air pressure. The tire will be underinflated. While tubeless tires have some ability to self-seal if they are punctured, you should look closely for punctures if a tire starts losing pressure.
09/07/02 17:22:02 31SNA640_321 Tires High Speed Driving Si model only We strongly recommend that you do not drive faster than the posted speed limits and conditions allow. If you ever drive in a sanctioned competitive event at sustained high speeds (over 118 mph or 190 km/h), be sure to adjust the cold tire pressures as shown in the next column. If you do not, excessive heat can build up and cause sudden tire failure.
09/07/02 17:22:11 31SNA640_322 Tires INDICATOR LOCATION MARKS TREAD WEAR INDICATOR The last four digits of the TIN (tire identification number) are found on the sidewall of the tire and indicate the date of manufacture (See Tire Labeling on page 359 ). In addition to your regular inspections and inflation pressure maintenance, it is recommended that you have annual inspections performed once the tires reach five years old.
09/07/02 17:22:23 31SNA640_323 Tires Tire Maintenance In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. Have your dealer check the tires if you feel a consistent vibration while driving. A tire should always be rebalanced if it is removed from the wheel. When you have new tires installed, make sure they are balanced. This increases riding comfort and tire life.
09/07/02 17:22:35 31SNA640_324 Tires The mileage you can expect from your vehicle tires is the same as comparable mid-and rear-engine sports cars, and it will vary greatly with your driving habits. If you drive moderately, the front tires could last more than 10,000 miles (16,000 km). However, the mileage will be substantially less if you tend to drive your vehicle at the upper limits of its capabilities.
09/07/02 17:22:46 31SNA640_325 Tires Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Always use the size and type of tires recommended in this owner’s manual. Wheel and Tire Specifications Wheels: (DX, Canadian DX-G) 15 x 6J (EX-L, U.S.
09/07/02 17:23:02 31SNA640_326 Tires Winter Driving Tires marked ‘‘M + S’’ or ‘‘All Season’’ on the sidewall have an allweather tread design suitable for most winter driving conditions. For the best performance in snowy or icy conditions, you should install snow tires or tire chains. They may be required by local laws under certain conditions.
09/07/02 17:23:10 31SNA640_327 Tires, Checking the Battery Checking the Battery Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed. TEST INDICATOR WINDOW TEST INDICATOR WINDOW Follow all instructions in this owner’s manual regarding the selection and use of tire chains. Except Si Check the condition of the battery monthly by looking at the test indicator window.
09/07/02 17:23:20 31SNA640_328 Checking the Battery If additional battery maintenance is needed, see your dealer or a qualified technician. WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling. If you need to connect the battery to a charger, disconnect both cables to prevent damaging your vehicle’s electrical system. Always disconnect the negative (−) cable first, and reconnect it last.
09/07/02 17:23:32 31SNA640_329 Vehicle Storage If you need to park your vehicle for an extended period (more than 1 month), there are several things you should do to prepare it for storage. Proper preparation helps prevent deterioration and makes it easier to get your vehicle back on the road. If possible, store your vehicle indoors. Fill the fuel tank. Wash and dry the exterior completely. Clean the interior. Make sure the carpeting, floor mats, etc., are completely dry. Leave the parking brake off.
09/07/02 17:23:36 31SNA640_330 Taking Care of the Unexpected This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed. Compact Spare Tire....................... 326 Changing a Flat Tire .....................
09/07/02 17:23:48 31SNA640_331 Compact Spare Tire Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Check the air pressure of the compact spare tire every time you check the other tires. It should be inflated to: 60 psi (420 kPa , 4.2 kgf/cm ) Follow these precautions: Never exceed 50 mph (80 km/h). This tire gives a harsher ride and less traction on some road surfaces.
09/07/02 17:24:00 31SNA640_332 Changing a Flat Tire If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes. The vehicle can easily roll off the jack, seriously injuring anyone underneath. The compact spare tire is smaller than a standard tire, and it will affect the vehicle’s handling. Drive cautiously when the spare is mounted on your vehicle.
09/07/02 17:24:09 31SNA640_333 Changing a Flat Tire JACKING POINTS WHEEL NUT WRENCH Canadian DX-G model Remove the center cap from the wheel with the extension. 328 6. Loosen each wheel nut 1/2 turn with the wheel nut wrench. 7. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch.
09/07/02 17:24:20 31SNA640_334 Changing a Flat Tire WHEEL NUTS EXTENSION WHEEL NUT WRENCH 9. Remove the wheel nuts, then remove the flat tire. Handle the wheel nuts carefully; they may be hot from driving. Place the flat tire on the ground with the outside surface facing up. WHEEL COVER DX and U.S. LX models: Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. BRAKE HUB 10.
09/07/02 17:24:27 31SNA640_335 Changing a Flat Tire 11.Put on the spare tire. Put the wheel nuts back on finger-tight, then tighten them in a crisscross pattern with the wheel nut wrench until the wheel is firmly against the hub. Do not try to tighten the wheel nuts fully. 12.Lower the vehicle to the ground, and remove the jack. CENTER CAP 13.Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility.
09/07/02 17:24:39 31SNA640_336 Changing a Flat Tire WING BOLT SPACER CONE 18.Store the jack and tools in the tool case. Place the tool case in the center of the flat tire. 19.Store the wheel cover or center cap in the trunk. Make sure it does not get scratched or damaged. 20.Lower the trunk floor, and close the trunk lid. Loose items can fly around the interior in a crash and could seriously injure the occupants. For normal For spare tire tire Store the wheel, jack, and tools securely before driving.
09/07/02 17:24:49 31SNA640_337 If the Engine Won’t Start Diagnosing why the engine won’t start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position: You hear nothing, or almost nothing. The engine’s starter motor does not operate at all, or operates very slowly. You can hear the starter motor operating normally, or the starter motor sounds like it is spinning faster than normal, but the engine does not start up and run.
09/07/02 17:25:00 31SNA640_338 If the Engine Won’t Start If the headlights dim noticeably or go out when you try to start the engine, either the battery is discharged or the connections are corroded. Check the condition of the battery and terminal connections (see page 322 ). You can then try jump starting the vehicle from a booster battery (see page 334 ).
09/07/02 17:25:10 31SNA640_339 Jump Starting Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. To jump start your vehicle: 1. Open the hood, and check the physical condition of the battery. In very cold weather, check the condition of the electrolyte. If it seems slushy or frozen, do not try jump starting until it thaws.
09/07/02 17:25:21 31SNA640_340 Jump Starting Si Except Si Si BOOSTER BATTERY 4. Connect the second jumper cable to the negative (−) terminal on the booster battery. Connect the other end to the grounding strap as shown. Do not connect this jumper cable to any other part of the engine. 6. Start the vehicle. If the starter motor still operates slowly, check that the jumper cables have good metal-to-metal contact. 5.
09/07/02 17:25:25 31SNA640_341 Jump Starting 7. Once your vehicle is running, disconnect the negative cable from your vehicle, then from the booster battery. Disconnect the positive cable from your vehicle, then from the booster battery. 336 Keep the ends of the jumper cables away from each other and any metal on the vehicle until everything is disconnected. Otherwise, you may cause an electrical short.
09/07/02 17:25:33 31SNA640_342 If the Engine Overheats The reading of the vehicle’s temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If the vehicle overheats, you should take immediate action. The only indication may be the temperature gauge climbing to or above the red mark. Or you may see steam or spray coming from under the hood.
09/07/02 17:25:45 31SNA640_343 If the Engine Overheats 3. If you do not see steam or spray, leave the engine running and watch the temperature gauge. If the high heat is due to overloading, the engine should start to cool down almost immediately. If it does, wait until the temperature gauge comes down to the midpoint, then continue driving. 4. If the temperature gauge stays at the red mark, turn off the engine. 5. Look for any obvious coolant leaks, such as a split radiator hose.
09/07/02 17:25:59 31SNA640_344 Low Oil Pressure Indicator, Charging System Indicator Low Oil Pressure Indicator This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and you should take immediate action. 2. Let the vehicle sit for a minute. Open the hood, and check the oil level (see page 241 ).
09/07/02 17:26:09 31SNA640_345 Malfunction Indicator Lamp If this indicator comes on while driving, it means one of the engine’s emissions control systems may have a problem. Even though you may feel no difference in your vehicle’s performance, it can reduce your fuel economy and cause increased emissions. Continued operation may cause serious damage. If you have recently refueled your vehicle, the indicator coming on could be due to a loose or missing fuel fill cap.
09/07/02 17:26:17 31SNA640_346 Brake System Indicator The brake system indicator normally comes on when you turn the ignition switch to the ON (II) position and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. U.S. Canada If the fluid level is low, take your vehicle to a dealer, and have the brake system inspected for leaks or worn brake pads.
09/07/02 17:26:26 31SNA640_347 Fuses INTERIOR UNDER-HOOD TAB FUSE LABEL The fuses are in two fuse boxes. The interior fuse box is underneath the steering column. 342 The under-hood fuse box is on the driver’s side, next to the brake fluid reservoir. To open it, push the tabs as shown. Checking and Replacing Fuses If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.
09/07/02 17:26:35 31SNA640_348 Fuses FUSE BLOWN BLOWN FUSE PULLER 2. Remove the cover from the fuse box. 3. Check each of the large fuses in the under-hood fuse box by looking through the top at the wire inside. Removing these fuses requires a Phillips-head screwdriver. 4. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided on the back of the under-hood fuse box cover.
09/07/02 17:26:43 31SNA640_349 Fuses BLOWN If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio). SPARE FUSES FUSE PULLER 5. Look for a blown wire inside the fuse. If it is blown, replace it with one of the spare fuses of the same rating or lower.
09/07/02 17:26:49 31SNA640_350 Fuses Replacing a f use with one that has a higher rating greatly increases the chances of damaging the electrical system. If you do not have a replacement f use with the proper rating f or the circuit, install one with a lower rating. When the audio system is disabled, the clock setting in the audio system will be canceled. You will need to reset the clock (see page 207 ). Taking Care of the Unexpected 6.
09/07/02 17:26:57 31SNA640_351 Fuse Locations UNDER-HOOD FUSE BOX No. Amps. 4 5 6 7 No. Amps. 1 2 3 346 100 A (70 A) 60 A 50 A 30 A 30 A 40 A*2 Circuits Protected Main Fuse EPS*1 Option Main Ignition Switch Main ABS/VSA Motor ABS/VSA F/S 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 50 A 40 A − 20 A 20 A 30 A 30 A 40 A 10 A 15 A 15 A − − 7.5 A − (15 A) 15 A 15 A 7.5 A 15 A 7.
09/07/02 17:27:10 31SNA640_352 Fuse Locations INTERIOR FUSE BOX No. Amps. 1 2 3 4 5 6 7 8 7.5 A 15 A 10 A 7.5 A (15 A) (20 A) (7.5 A) − Circuits Protected Power Window Fuel Pump Alternator ABS/VSA Heated Seat* Front Fog Light* TPMS* Not Used No. Amps. 9 10 11 12 13 14 15 16 7.5 A 7.5 A 10 A 10 A 10 A 7.5 A 7.
09/07/02 17:27:25 31SNA640_353 Emergency Towing If your vehicle needs to be towed, call a professional towing service or organization. Never tow your vehicle with just a rope or chain. It is very dangerous. There are two ways to tow your vehicle: Flat-bed Equipment − The operator loads your vehicle on the back of a truck. This is the best way to transport your vehicle. Wheel-lift Equipment − The tow truck uses two pivoting arms that go under the front tires and lift them off the ground.
09/07/02 17:27:31 31SNA640_354 Emergency Towing Do not tie down the vehicle at an angle that would allow the towing cables to contact the vehicle’s front bumper. To avoid possible damage, protect the front bumper with tape. If your vehicle is equipped with a front spoiler, remove it before towing so it is not damaged. The steering system can be damaged if the steering wheel is locked.
09/07/02 17:27:34 31SNA640_355 350
09/07/02 17:27:39 31SNA640_356 Technical Information The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your vehicle’s tires and emissions control systems. Identification Numbers ................. 352 Specifications ................................. 354 DOT Tire Quality Grading (U.S. Vehicles) ....................... 357 Treadwear ..................................
09/07/02 17:27:45 31SNA640_357 Identification Numbers Your vehicle has several identifying numbers in various places. The vehicle identification number (VIN) is the 17-digit number your dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. You can see it by looking through the windshield on the driver’s side.
09/07/02 17:27:51 31SNA640_358 Identification Numbers The engine number is stamped into the engine block. It is on the front. Except Si The transmission number is on a label on top of the transmission.
09/07/02 17:28:03 31SNA640_359 Specifications Dimensions Length Width Height Wheelbase Track Front Rear Weights Gross vehicle weight rating Seating Capacities Total Front Rear 354 177.3 in (4,504 mm) 69.0 in (1,752 mm) 56.5 in (1,435 mm) 106.3 in (2,700 mm) 59.0 in (1,499 mm) 60.2 in (1,528 mm) Engine Type Bore x Stroke Displacement Compression ratio See the certification label attached to the driver’s doorjamb.
09/07/02 17:28:30 31SNA640_360 Specifications Capacities Fuel tank Engine coolant Change*1 A/T M/T Total Engine oil A/T M/T Change*2 Including filter Without filter Total Manual Change transmission fluid Total Change Total U.S. Vehicles Canada Vehicles 3.9 US qt (3.7 ) *3 4.6 US qt (4.4 ) *4 3.7 US qt (3.5 ) *3 4.4 US qt (4.2 ) *4 4.8 US qt (4.5 ) *3 5.8 US qt (5.5 ) *4 1.5 US qt (1.4 ) *3 1.6 US qt (1.5 ) *4 1.7 US qt (1.6 ) *3 1.8 US qt (1.7 ) *4 2.5 US qt (2.4 ) 6.08 US qt (5.75 ) 2.6 US qt (2.
09/07/02 17:28:52 31SNA640_361 Specifications Battery Capacity U.S. Vehicles Canada Vehicles Fuses Interior Camber Caster 356 − − − − − − 36 AH/5 HR 45 AH/20 HR 38 AH/5 HR *7 47 AH/20 HR *7 38 AH/5 HR 47 AH/20 HR See page 347 or the fuse label attached to the inside of the fuse box door under the steering column. See page 346 or the fuse box cover. Under-hood Alignment Toe-in 12 V 12 V 12 V 12 V 12 V 12 V Front Rear Front Rear Front 0.00 in (0.0 mm) 0.08 in (2.
09/07/02 17:29:02 31SNA640_362 DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Traction The traction grades, from highest to lowest, are AA, A, B, and C.
09/07/02 17:29:07 31SNA640_363 DOT Tire Quality Grading (U.S. Vehicles) Temperature The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
09/07/02 17:29:25 31SNA640_364 Tire Labeling The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. TIRE LABELING EXAMPLE Tire Size Tire Identification Number (TIN) Whenever tires are replaced, they should be replaced with tires of the same size. Below is an example of tire size with an explanation of what each component means. The tire identification number (TIN) is a group of numbers and letters that look like the following example.
09/07/02 17:29:32 31SNA640_365 Tire Labeling Glossary of Tire Terminology Cold Tire Pressure − The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km). Load Rating − Means the maximum load that a tire is rated to carry for a given inflation pressure. Maximum Inflation Pressure − The maximum tire air pressure that the tire can hold.
09/07/02 17:29:41 31SNA640_366 Tire Pressure Monitoring System (TPMS) − Required Federal Explanation U.S. models only Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
09/07/02 17:29:47 31SNA640_367 Tire Pressure Monitoring System (TPMS) − Required Federal Explanation Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is provided by a separate telltale, which displays the symbol ‘‘TPMS’’ when illuminated. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
09/07/02 17:29:58 31SNA640_368 Emissions Controls The burning of gasoline in your vehicle’s engine produces several byproducts. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlight and climate, NOx and HC react to form photochemical ‘‘smog.
09/07/02 17:30:10 31SNA640_369 Emissions Controls Exhaust Emissions Controls The exhaust emissions controls include three or four systems: PGM-FI, ignition timing control, exhaust gas recirculation, and three way catalytic converter. These systems work together to control the engine’s combustion and minimize the amount of HC, CO, and NOx that come out the tailpipe. The exhaust emissions control systems are separate from the crankcase and evaporative emissions control systems.
09/07/02 17:30:20 31SNA640_370 Three Way Catalytic Converter Except Si model Si model Always use unleaded gasoline. Even a small amount of leaded gasoline can contaminate the catalyst metals, making the three way catalytic converter ineffective. Keep the engine well maintained. THREE WAY CATALYTIC CONVERTER The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals.
09/07/02 17:30:30 31SNA640_371 Emissions Testing Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘readiness codes’’ that must be set in the onboard diagnostics for the emissions systems. These codes are erased when the battery is disconnected, and set again only after several days of driving under a variety of conditions.
09/07/02 17:30:36 31SNA640_372 Emissions Testing 7. Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (automatic) or 5th (manual). Do not use the cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.
09/07/02 17:30:38 31SNA640_373 368
09/07/02 17:30:42 31SNA640_374 Warranty and Customer Relations 369 Warranty and Customer Relations Customer Service Information..... 370 Warranty Coverages ..................... 371 Reporting Safety Defects (U.S. Vehicles) ........................... 372 Authorized Manuals ......................
09/07/02 17:30:52 31SNA640_375 Customer Service Information Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership’s management. The service manager or general manager can help. Almost all problems are solved in this way. If you are dissatisfied with the decision made by the dealership’s management, contact Honda Customer Service. U.S.
09/07/02 17:31:06 31SNA640_376 Warranty Coverages U.S. Owners Your new vehicle is covered by these warranties: Emissions Control Systems Defects Warranty and Emissions Performance Warranty − these two warranties cover your vehicle’s emissions control systems. Time, mileage, and coverage are conditional. Please read your warranty booklet for exact information. Original Equipment Battery Limited Warranty − this warranty gives up to 100% credit toward a replacement battery.
09/07/02 17:31:11 31SNA640_377 Reporting Safety Defects (U.S. Vehicles) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc. 372 If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
09/07/02 17:31:23 31SNA640_378 Authorized Manuals Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order by phone or online: Call Helm Inc. at 1-800-782-4356 (credit card orders only) Go online at www. helminc. com If you are interested in other years or models, contact Helm Inc. at 1-800-782-4356.
09/07/02 17:31:32 31SNA640_380 Index A B Battery Charging System Indicator............................ 65, 339 Jump Starting ............................. 334 Maintenance ............................... 322 Specifications ............................. 356 Before Driving ............................... 237 Belts, Seat ..................................... 8, 18 Beverage Holders .......................... 108 Bluetooth HandsFreeLink ......... 212 Brakes Anti-lock System (ABS) ............
09/07/02 17:31:40 31SNA640_381 Index Bulb Replacement Back-up Lights ........................... 305 Brake Lights............................... 305 Front Side Marker Lights......... 304 Front Turn Signal Lights .......... 304 Headlights .......................... 302, 303 High-mount Brake Light .......... 307 Parking Lights ........................... 304 Rear Side Marker Lights .......... 305 Rear Turn Signal Lights ........... 305 Specifications ............................. 355 Bulbs, Halogen .........
09/07/02 17:31:46 31SNA640_382 Index Doors Auto Door Locking/Unlocking.. 83 Auto Door Locking ...................... 83 Auto Door Unlocking .................. 85 Locking and Unlocking ............... 81 Power Door Locks ....................... 82 DOT Tire Quality Grading* ......... 357 Downshifting, Manual Transmission .............................. 257 Driver and Passenger Safety ............ 5 Driving ............................................ 253 Economy .....................................
09/07/02 17:31:53 31SNA640_383 Index Fuel .................................................. 238 Fill Door and Cap....................... 239 Gauge ............................................ 70 Octane Requirement ................. 238 Oxygenated ................................ 238 Reserve Indicator......................... 64 Tank, Filling the......................... 239 Fuses, Checking the ...................... 342 G Gas Mileage, Improving................ 244 Gasoline ...............................
09/07/02 17:32:01 31SNA640_384 Index Jump Starting ................................. 334 K Keys ................................................... 78 Lower Anchors................................. 42 Lower Gear, Downshifting to a.... 257 Low Oil Pressure Indicator .... 65, 339 Low Tire Pressure Indicator*.............................. 63, 270 Lubricant Specifications Chart .... 355 New Vehicle Break-in ................... 238 Normal Shift Speeds...................... 258 NOTICE, Explanation of ........
09/07/02 17:32:07 31SNA640_385 Index P Panel Brightness Control ............... 75 Park Gear Position......................... 261 Parking ............................................ 264 Parking Brake ................................ 105 Parking Brake and Brake System Indicator .................. 59, 341 Parking Lights.................................. 73 Parking Over Things that Burn ... 365 PGM-FI System.............................. 364 Playing a Disc .........................
09/07/02 17:32:13 31SNA640_386 Index Speed-sensitive Volume Compensation (SVC) ........ 119, 160 Spotlights ........................................ 106 SRS, Additional Information........... 21 Additional Safety Precautions .... 32 Advanced Airbag System ........... 26 Airbag Service .............................. 31 How the Passenger Airbag Off Indicator Works ....................... 30 How the Side Airbag Off Indicator Works ....................... 30 How the SRS Indicator Works ........................
09/07/02 17:32:20 31SNA640_387 Index Technical Descriptions DOT Tire Quality Grading* ..... 357 Emissions Control Systems ...... 363 Emissions Testing ..................... 366 Oxygenated Fuels...................... 238 Three Way Catalytic Converter ................................ 364 Tire Labeling .................................. 359 Temperature Gauge ........................ 70 Tether Anchor Points...................... 45 Theft Protection.............................
09/07/02 17:32:25 31SNA640_388 Index Vehicle Stability Assist (VSA ) System ...................... 268 Activation Indicator ............. 62, 268 Off Switch ................................... 269 System Indicator .................. 62, 268 Washers ........................................ 72 Wipers, Windshield Changing Blades ........................ 311 Operation ...................................... 72 Worn Tires ............................. 316, 317 Wrecker, Emergency Towing ......
09/07/02 17:32:47 31SNA640_389 Service Information Summary Gasoline: Except Si Unleaded gasoline, pump octane number of 87 or higher. Si Premium unleaded gasoline, pump octane number of 91 or higher recommended (see ‘‘Fuel Recommendations’’ on page 238 ). Fuel Tank Capacity: 13.2 US gal (50 ) Recommended Engine Oil: Except Si API Premium grade 5W-20 detergent oil (see page 291 ). Oil change capacity (including filter): 3.9 US qt (3.7 ) Si API Premium grade 5W-30 detergent oil (see page 291 ).
09/07/02 16:24:41 31SNA640_001 Owner’s Identification This owner’s manual should be considered a permanent part of the vehicle and should remain with the vehicle when it is sold. OWNER This owner’s manual covers all models of the Civic 4-door. You may find descriptions of equipment and features that are not on your particular model. ADDRESS STREET CITY STATE/PROVINCE/TERRITORY ZIP CODE/ POSTAL CODE V. I. N.