Owner's Manual

Engine Oil u Changing Engine Oil & Filter
67
Maintenance
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10. Fill the crankcase with the recommended
oil (2 P. 50) and install the oil fill cap.
11. Check the oil level. 2 P. 64
12. Check that there are no oil leaks.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Oil filter
Rubber seal
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Required oil
When changing oil &
engine oil filter:
2.7 litres (2.9 US qt, 2.4 Imp qt)
When changing oil only:
2.5 litres (2.6 US qt, 2.2 Imp qt)
13 CB500F-32MGZA000.book 67 ページ ２０１２年１１月２７日 火曜日 午後３時５７分