User guide

289
uuReplacing Light BulbsuSide Marker Light Bulb
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert new bulb.
Side Marker Light Bulb
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Bulb
Coupler
Tab
Side Marker Light: 3 CP
1Fog Light Bulbs
*
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Bulb
Socket
* Not available on all models
13 CR-V-31T0A6100.book 289 ページ ２０１２年８月１０日 金曜日 午後３時３４分
Home
QRG
Index
2013 CR-V
Maintenance
TOC