User guide

70
uuIndicatorsu
Instrument Panel
Indicator Name On/Blinking Explanation
Transmission
Indicator
●
Comes on for a few seconds when you turn
the ignition switch to ON (w, then goes off.
●
Blinks if the transmission system has a
problem.
●
Blinks while driving - Avoid sudden starts and
acceleration and have the vehicle checked by a dealer
immediately.
Seat Belt
Reminder
Indicator
●
Comes on and the beeper sounds if you are
not wearing a seat belt when you turn the
ignition switch to ON
(w.
●
If the front passenger is not wearing a seat
belt, the indicator comes on a few seconds
later.
●
Blinks while driving if either you or the front
passenger has not fastened a seat belt. The
beeper sounds and the indicator blinks at
regular intervals.
●
The beeper stops and the indicator goes off when you
and the front passenger fasten their seat belts.
●
Stays on after you or the front passenger has
fastened the seat belt - A detection error may have
occurred in the sensor. Have the vehicle checked by a
dealer.
2 Seat Belt Reminder P. 30
Low Fuel
Indicator
●
Comes on when the fuel reserve is running
low (approximately 2.3 U.S. gal./8.6 Liter left).
●
Blinks if there is a problem with the fuel
gauge.
●
Comes on - Refuel your vehicle as soon as possible.
●
Blinks - Have the vehicle checked by a dealer.
13 CR-V-31T0A6100.book 70 ページ ２０１２年８月１０日 金曜日 午後３時３４分
Home
QRG
Index
2013 CR-V
TOC