Owner's Manual Instruction Manual

133
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
*
Controls
1. Turn the ignition switch to ON
(w
. Adjust
the driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
u You will hear a
beep, and the memory
button indicator light will blink.
3. Press and hold memory button
(1
or
(2
within five seconds of pressing the SET
button.
u Once the seat
and the door mirror
positions have been memorized, the
indicator light on the button you pressed
stays on.
1. Move the shift lever
to
(P
.
2. Apply the parking brake.
3. Press a memory button (
(1
or
(2
).
u You will hear a
beep, and the indicator
light will blink.
The seat and the door mirrors will
automatically move to the m
emorized
positions. When they have finished moving,
you will hear a beep, and the indicator light
stays on.
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You readjust the door mirrors.
• You turn the ignition switch to any position except
ON
(w .
Memory Button 1
Memory Button 2
SET Button
■
Recalling the Stored Position
1Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
• Press the SET button, or a memory button ( (1 or
(2 ).
• Adjust the seat position.
• Adjust the door mirrors.
• Shift into any position except (P .
Memory Button 1
Memory Button 2
SET Button