Owner's Manual Instruction Manual

71
uu Indicators u
Continued
Instrument Panel
Indicator Name On/Blinking Explanation Message
*
ABS (Anti-lock
Brake System)
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
, then goes off.
●
If it comes on at any other time, there
is a problem with the ABS.
●
Stays on constantly - Have the vehicle
checked by a dealer. With this indicator
on, your vehicle still has normal braking
ability but no anti-lock function.
2 ABS (Anti-lock Brake System) P. 362
Supplemental
Restraint System
Indicator
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
, then goes off.
●
Comes on if a problem with any of
the following is detected:
- Supplemental restraint system
- Side air
bag system
- Side curtain
airbag system
- Seat belt tensioner
●
Stays on constantly or does not come
on at all
- Have the vehicle checked by a
dealer.
VTM-4® System
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
, then goes off.
●
Comes on if there is a problem with
the VTM-4®.
●
Blinks when the VTM-4® system is
overheated. The system is inactive.
●
Stays on constantly - Have the vehicle
checked by a dealer.
●
Blinks while driving - The VTM-4® fluid
temperature is too high. Stop in a safe
place, shift to
(P
, and idle the engine
until the indicator goes off. If the
indicator does not stop blinking, take
your vehicle to a dealer.
2 VTM (Variable Torque
Management)-4r System * P. 354
—
* Not available on all models