Reference Guide

12 13
HOMELINK
®
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems. Available on V-6.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YESNO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YESNO
YESNO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and hold
the programmed HomeLink button
for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at [phone], or
visit www.homelink.com.
FUEL FILL DOOR
Opening the Fuel Fill Door
When you unlock the driver’s
door, the fuel door unlocks.
To open, push and release the fuel
door in the area shown until it
pops open.
Closing the Fuel Fill Door
Push the fuel door until it is flush
with the body.
Easy-to-use locking fuel door keeps your fuel cap secure.
When you lock the driver’s door,
the fuel door locks.
Note: If you lock the doors while the
fuel door is open, you must unlock the
doors to close the fuel door.
15 Crosstour TRG_EXL NAVI_AQS51528_ATG_NEW STYLE 8/5/2014 10:50 AM Page 8