Owner's Manual

Multi-function Display
Instruments & Controls
28
The WP SET button is used to set the digital
clock (page 37) and input a waypoint or to
erase mileage to a waypoint.
The WP SET button is also used to reset zero
(0) the tripmeter, time meter and mileage to a
waypoint. To reset the tripmeter, time meter
and mileage to a waypoint, press and hold the
button for more than 2 seconds.
When the rpm reading on the tachometer
exceeds 3,000 rpm, the display will not
respond to the WP SET button if you press it.
The SET button is used to set the digital
clock (page 39).
The SET button is also used to reset zero (0)
the tripmeter and time meter. To reset the
tripmeter and time meter, press and hold the
button for more than 2 seconds.
When the rpm reading on the tachometer
exceeds 3,000 rpm, the display will not
respond to the SET button if you press it.
SET Button (ARX1500T3/N3)WP SET Button (ARX1500T3DX)