Owner's Manual

CONTROLS AND FEATURES
Power Tilt Switch
POWER TILT SWITCH
The power tilt switch is located on
the engine pan. It is a rocker switch
with
UP and DN (down) positions
for changing the angle of the
outboard motor.
The power tilt switch will operate
without turning the ignition switch
ON.
This switch is used with the engine
stopped to raise the outboard motor
for mooring, trailering or
maintenance.
26
Manual Relief Valve
MANUAL RELIEF VALVE
The outboard motor can be tilted
manually after opening the manual
relief valve. This allows :he outboard
motor to be tilted when no battery is
connected.
Tilt Lock Lever
TILT LOCK
FREE LEVER
The tilt lock lever is used to support
the outboard motor in the fully-raised
position.
When the boat is to be moored for a
long time,tilt the outboard motor as
far as it will
go. Then move the tilt
lock lever to the
LOCK position, and
gently lower the outboard motor until
the lever contacts the stem bracket.