Owner's Manual

61
MANUAL RELIEF VALVE ENGINE COVER REMOVAL
AND INSTALLATION
SERVICING YOUR OUTBOARD MOTOR
MANUAL RELIEF VALVE
MMAANNUUAALL
((TToo rreelleeaassee))
PPOOWWEERR
((TToo ffiixx))
ENGINE COVER LOCK LEVER
UUNNLLOOCCKK
LLOOCCKK
FRONT
SIDE
UNLOCK
ENGINE COVER
LOCK LEVER
LOCK
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
For manual tilting, use a screwdriver
to turn the valve counterclockwise 1
or 2 turns. Close the valve firmly
after positioning the outboard motor.
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted when no
battery is connected.
To remove the engine cover, turn
both front and side levers to the
unlocked position, then lift the
engine cover off the outboard motor.
To install the engine cover, place the
cover on the outboard motor, then
turn both front and side lock levers to
the locked position.
The engine cover lock levers fasten
the engine cover to the outboard
motor.
02/07/23 13:10:38 31ZW5601_062