Owner's Manual

CONTROLS AND FEATURES
Turning the ignition switch key to the
START position operates the starter
motor. The key automatically returns
to the
ON position when released
from the START position.
The ignition switch can be used to
operate the starter motor only when
the control lever (p.
21 ) is in the N
(neutral) position, and the clip is in
the emergency stop switch.
Turning the ignition switch to the
OFF position stops the engine.
Switch Clip and Emergency Stop
Switch
EMERGENCY
STOP SWITCH
SWITCH
CLIP \
LANYARD
SWITCH
CLIP
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard must be attached to the
operator's PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in the
tool bag (optional equipment).
SPARE SWITCH CLIP
19