Owner's Manual

CONTROLS AND FEATURES
The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard must be attached to the
operator’s PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in the
tool bag (optional equipment).
SPARE SWITCH CLIP
Fast Idle Button
N (neutral)
F (forward)
p-,y
Push
CONTROL
LEVER
FAST IDLE BUTTON
By moving the control lever forward
or reverse when the fast idle button is
pushed in, the throttle opening will
be increased without engaging the
gears.
It is necessary to position the control
lever in
N (neutral) to push in the fast
idle button.
Gearshift/Throttle Control
Lever
SINGLE
DUAL
CONTROL
LEVERS
The gearshifdthrottle control lever
controls engine speed and selects
F
(forward), N (neutral), or R (reverse)
gears.
23