Owner's Manual

CONTROLS AND FEATURES
Fast Idle Lever
N (neutral)
MAXIMUM FAST IDLE
The fast idle lever is only needed for
starting carbureted outboard models.
The BF200A and BF225A models
use programmed
fuel injection so,
this lever will not be needed for
starting.
After the engine starts and if the
outside temperature is below
41 OF
(5"C), the fast idle lever can be used
to accelerate engine warm up.
The fast idle lever will not move
unless the remote control lever is in
the
N (neutral) position. Conversely,
the remote control lever will not
move unless the fast idle lever is in
the lowest position.
Lower the fast idle lever to the
lowest position to decrease the fast
idle.
Panel-Mount Type
Ignition Switch
ON START
OFF
IGNITION '
SWITCH KEY \
The ignition switch controls the
ignition system and starter motor.
18