Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
Engine Oil Level Check
Check the engine oil level with the
engine stopped and the outboard
motor in the vertical position.
1. Unlock and remove the engine
cover (p.
58 ).
2. Remove the dipstick and wipe it
clean.
OIL LEVEL DIPSTICK
3. Insert the dipstick all the way in,
then remove it and check the oil
level shown on the dipstick.
OIL FILLER CAP
4. If the oil level is low, remove the
oil filler cap, and add oil to reach
the upper limit mark shown on the
dipstick. Use the oil recommended
on p. 62.
(NOTlCEI
Running the engine with a low oil
level can cause engine damage.
5. Install the oil filler cap and tighten
it securely. Do not overtighten.
6. Install and lock the engine cover.
Engine Oil Change
An engine oil evacuation/filling
device may be used to remove/add
the engine oil.
Drain the used oil while the engine is
warm. Warm oil drains quickly and
completely.
1. Unlock and remove the engine
cover
(p. 58 ).
DRAIN PLUG SCREW
DRAIN PLUG COVER
2. Remove the screw from the oil
drain plug cover, and remove the
cover.