Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
8. Prime the engine using the priming
bulb (refer to page
35). Check for
fuel leaks. Repair any fuel leaks if
necessary.
If loss of power or hard starting are
found to be caused by excessive
water or sediment accumulation in
the
fuel filter, inspect the fuel tank.
Clean the fuel tank and tank filter if
necessary. It may be necessary to
drain the fuel tank completely and
refill with fresh gasoline.
Water Separator Inspection and
Service
WATER SEPARATOR
Water separator is located beside the
oil level dipstick. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized Honda outboard motor
dealer for clean.
Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
71