Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS
Fuse FUSE (150A)
FUSE CASE
LID /
SPARE FUSE
Disconnect the battery cable at
the battery negative
(-) terminal
before replacing the
f use.
Failure
to do so may cause A
short circuit.
Replacement
1. Stop the engine.
2. Remove the engine cover.
3. Remove the fuse case lid.
4. Remove the old fuse by removing
two
5 mm screws.
5. Install a new fuse with the “150
A” mark downward.
ACG
FUSE: 150 A
6. After finishing replacement, install
the fuse case lid with its hook
toward the engine side.
7. Be sure to check the fuse case lid
is securely locked.
A spare fuse is located on the reverse
side of the fuse case lid and tightened
with two
3 mm screws.
When the new fuse is set as a spare
fuse on the reverse side
of the fuse
case lid, set the fuse
so that you can
see the
“150 A” mark on it.
88