Owner's Manual

62
MANUAL RELIEF VALVE
ENGINE COVER REMOVAL
AND INSTALLATION
SERVICING YOUR OUTBOARD MOTOR
PPOOWWEERR
((TToo ffiixx))
(REAR)
(FRONT)
ENGINE COVER
LATCH
MMAANNUUAALL
((TToo rreelleeaassee))
RIGHT STERN BRACKET
MANUAL
RELIEF VALVE
FFIIXX
UUNNLLAATTCCHH
UNLATCH
FFIIXX
ENGINE COVER LATCH
LHT, LRT and XRT Types
The engine cover latches fasten the
engine cover to the outboard motor.
To remove the engine cover, unlatch
both front and rear latches, then lift
the engine cover off the outboard
motor.
To install the engine cover, place the
cover on the outboard motor, then
latch both front and rear latches
securely.
The outboard motor can be tilted
manually after opening the manual
relief valve. This feature enables the
outboard motor to be tilted when no
battery is connected.
For manual tilting, use a flat
screwdriver to turn the valve
counterclockwise 2 and a half turns.
Close the valve firmly after
positioning the outboard motor.
Be sure the valve is closed before
operating the outboard motor. If the
valve is not closed, the outboard
motor will tilt up when operated in
reverse.
04/03/15 11:06:13 31ZW3600_063