Owner's Manual

83
WITH OUTBOARD MOTOR
INSTALLED ON BOAT
WITH OUTBOARD MOTOR
REMOVED FROM BOAT
TRANSPORTING
MOTOR SUPPORT BAR
(commercially available)
TTOO DDEECCRREEAASSEE
FFRRIICCTTIIOONN
((FFRREEEE))
TTOO IINNCCRREEAASSEE
FFRRIICCTTIIOONN
((LLOOCCKK))
STEERING FRICTION ADJUSTER
All Types
LRTandXRTTypes
(remote control)
LH and LHT Types
(long tiller handle)
When trailering a boat with the
outboard motor attached, leave the
engine in the normal running position,
if possible.
Tighten the steering friction adjuster
to prevent the outboard motor from
moving while trailering the boat.
Use a motor support bar to prevent
the outboard motor from moving
while trailering the boat. Refer to the
manufacturer’s instructions for using
a motor support bar.
If there is insufficient road clearance
in the normal running position, then
tilt the outboard motor and use a
motor support bar, or remove the
outboard motor from the boat. Refer
to the manufacturer’s instructions for
using a motor support bar.
Secure the outboard motor in either
the vertical or horizontal position
shownonp. .82
04/03/15 11:09:54 31ZW3600_084