Operation Manual

58
Maintenance
Removing & Installing Body Components
Rear Seat
❙
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the rear seat
up and back.
❙
Installation
1. Insert the prongs into the rear stays on the
frame.
2. Push down on the rear of the rear seat.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the rear seat.
Prongs
Rear seatSeat lockIgnition key
Rear stays
13 CB500F-32MGZA000.book 58 ページ ２０１２年１１月２７日 火曜日 午後３時５７分