Owner's Manual

62
(5)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
(5) Lug ¼yx½
3. Remove the front brake adjusting nut
(3) and remove the front brake cable
(4) from the brake arm (5).
4. Remove the front axle nut (6).
5. Remove the front axle shaft (7) and
the wheel.
(6)
(1)
(2)
(4)
(3)
(5)
(7)
Front wheel removal
(Drum type)
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the speedometer cable (1) by
pushing the tab (2).
(1) Speedometer cable ¼LihMksehVj dscy½
(2) Tab ¼VSc½
(3) Brake adjusting nut ¼czsd ,MtfLaVx uV½
(4) Front brake cable ¼ÝaV czsd dscy½
(5) Brake arm ¼czsd vkeZ½
(6) Front axle nut ¼ÝaV ,Dly uV½
(7) Front axle shaft ¼ÝaV ,Dly “kkQV½