Owner's Manual

70
Do not try to open the clips, which prevent
fuse from coming out;
you could bend them and cause poor contact
with the new fuse. A loose fuse could cause
damage to the electrical system and even
start a fire.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
NOTICE
Replacing a fuse with one that has a higher
rating greatly increases the chance of
damage to the electrical system.
If the replacement fuse of the same rating
burns out in a short time, there is probably
a serious electrical problem on your vehicle.
leave the blown fuse in that circuit and have
your vehicle checked by your Honda dealer.
2. Remove the left side cover (page 29).
3. Open the fuse holder (1).
4. Pull out the old fuse and install a new
fuse. The spare fuse (2) is attached to
the fuse holder.
5. Install the fuse holders and left side cover.
(3) Fuse ¼¶;wt½ (4) Clips ¼fDyIl½
Removal
Pull
Installion
(3)
(4)