User's Manual

5718100S

NOTE

• If the engine does not start

after pressing the command

button followed by the start

button, the transmitter will

emit two short beeps to

indicate the signal has been

sent. It will then emit a long

buzzer sound and the engine-

off indicator is shown in the

display to indicate the engine

start was not successful.

• Verify all the conditions listed below are met and try

to start the engine again.

• The gearshift lever is in the “P” (Park) position.

• The brake pedal is not depressed.

• The engine hood is securely closed.

• All the doors are closed and locked.

• The tailgate or trunk lid is closed.

• The security warning system is not activated.

• The panic warning system is not activated.

• The keyless entry-integrated key or ignition key is

removed from the ignition switch.

• The battery power is not low.

Starting the Engine

5718080S

ENGINE-OFF

INDICATOR

CHECK

REMINDER

• When the RF signal from the

transmitter does not carry to

the receiver, the transmitter

emits three short buzzer

sounds but no indicator is

shown on the display.

• In some cases the remote

transmission range can be

longer than the reception range. Therefore the engine

can be started/stopped, and the remote status may

not be displayed.