Operation Manual

59
SERVICING YOUR GENERATOR
2. Remove the 4 mm self-tapping screw, and remove the spark
arrester.
3. Use a brush to remove carbon deposits from the spark arrester
sc
reen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and tears. Replace the
spark arrester if it is damaged.
4. Insta
ll the spark arrester in the reverse order of removal.
TORQUE: 1.6 lbf·ft (2.2 N·
m, 0.22 kgf·m)
5. Install the muffler protector in the reverse order of removal.
SPARK ARRESTER
4 mm SELF-TAPPING SCREW
31Z266100.book 59 ページ ２０１４年１２月５日 金曜日 午後５時７分