Operation Manual

87
ASSEMBLY
Wheel Kit Installation
1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8×16 mm
flange bolts.
3. Insta
ll the two stands on the under frame using two 8×20 mm flange
bolts, two 8×45 mm fl
ange bolts, and two collars.
TORQUE: 17–22 lbf·ft (2
4–29 N·m, 2.4–3.0 kgf·m)
8×20 mm
FLANGE BOLT (2)
COLLAR (2)
STAND (2)
AXLE SHAFT
WHEEL (2)
20 mm
PLAIN WASHER (2)
4.0×28 mm
SPLIT PIN (2)
8×45 mm
FLANGE BOLT (2)
8×16 mm
FLANGE BOLT (4)
31Z266100.book 87 ページ ２０１４年１２月５日 金曜日 午後５時７分