Operation Manual

90
ASSEMBLY
Engine Oil
The generator is shipped WITHOUT OIL in the engine.
1.
Place the generator on a level surface.
2. Open the maintenance cover.
3. Remove the oil filler cap and oil level dipstick.
4. Add enough oil to bring the oil level to the upper limit mark on the
oil dipstick. SAE 1
0W-30 API service category SJ or later (or
equivalent) is recommended for general use; for additional
recommendations (see page 50).
Maximum oil capacity:
Without oil filter replacement: approximately 1.6 US qt (1.5 L)
With oil filter replacement: approximately 1.8 US qt (1.7 L)
Do not overfill the engine with oil. If the engine is overfilled, the
e
xcess oil may be transferred to the air cleaner housing and air filter.
5. Reinstall the oil level dipstick and filler cap.
6. Close the maintenance cover.
31Z266100.book 90 ページ 2014年12月5日 金曜日 午後5時7分