User's Manual

CONTROLS

ENGINE SWITCH

To start and stop the engine.

Key position :

OFF:

To Stop the engine. Key

can

be removed/inserted.

ON:

To run the engine after starting.

START: To start the engine by turning the starter motor.

OF ENGINE SWITCH

Return the key to the ON position once the engine has started. Do not

use the starter for more than 5 seconds at a time. If the engine fails

to start, release the switch and wait 10 seconds before operating the

starter again.

RECOIL STARTER

To start the engine, pull the starter grip lightly until resistance is felt,

then pull briskly.

~NoTlCE1

Do not allow the starter grip to snap back against the engine.

Return it gently to prevent damage to the starter.