User's Manual

AC APPLICATIONS

Before connecting an appliance or power cord to the generator:

Make sure that it is in good working order. Faulty appliances or

power cords can create a potential for electrical shock.

If an appliance begins to operate abnormally, becomes sluggish or

stops suddenly, turn it off immediately. Disconnect the appliance,

and determine whether the problem is the appliance, or if the rated

load capacity of the generator has been exceeded.

. Make sure that the electrical rating of the tool or appliance does not

exceed that of the generator. Never exceed the maximum power

rating of the generator, Power levels between rated and maximum

may be used for no more than 30 minutes.

NOTlCE]

Substantial overloading will open the circuit breaker. Exceeding

the time limit for maximum power operation or slightly overload-

ing the generator may not switch the circuit breaker OFF, but will

shorten the service life of the generator.

Limit operation requiring maximum power to 30 minutes.

Maximum power is:

10.5 kVA

For continuous operation, do not exceed the rated power.

Rated power is:

9.5 kVA

In either case, the total power requirements (VA) of all appliances

connected must be considered. Appliance and power tool manufac-

turers usually list rating information near the model number or serial

number.