Installation Guide

54
STORAGE
Engine Oil
Change the engine oil (see page 41).
Engine Cylinder
1. Remove the spark plug (see page 46), and pour approximately one
teaspoon (5 cc) of clean engine oil into the cylinder. Crank the engine
several revolutions to distribute the oil, and then reinstall the spark
plug.
2. Reinstall the spark plug cap on the spark plug securely.
3. Reinstall the spark plug maintenance cover.
4. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
5. Pull the starter grip (see page 25) slowly until you feel resistance,
and then return the starter grip gently. This closes the valves so
moisture cannot enter.
31Z448000.book 54 ページ ２０１７年１０月１２日 木曜日 午前１０時５３分