Operation Manual

38
SERVICING YOUR GENERATOR
ENGINE OIL CHANGE
Drain the oil while the engine is warm to assure rapid and complete
drain
ing.
1.Place a suitable container below the engine to catch the used oil, and
then
remove the oil filler cap, drain plug, and sealing washer.
2.Allow the used oil to drain completely, and then reinstall the drain
plug and
a new sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.

If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container, and take it to a recycling center. Do not
discard it in a trash bin, dump it on the ground, or pour it down the
drain.
3.With the generator in a level position, fill with the r
ecommended oil to
the upper limit of the oil filler neck (see page 39).
Maximum oil capacity: 18 oz (0
.55 L)
4.
Reinstall the oil filler cap securely.
Wash your hands with soap and water after handling used oil.
SEALING WASHER
(Replace)
UPPER LIMIT
OIL DRAIN PLUG
31Z037210.book 38 ページ ２０１４年１月２７日 月曜日 午後１２時２分