Operation Manual

59
TECHNICAL INFORMATION
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your authorized Honda servicing dealer.
• Hard starting or stalling after starting.
• Rough idle.
• Misfiring or backfiring under load.
• Afterburning (backfiring).
• Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your new Honda engine were
designed
, built, and certified to conform with EPA and California
emission regulations. We recommend the use of genuine Honda parts
whenever you have maintenance done. These original-design
replacement parts are manufactured to the same standards as the
original parts, so you can be confident of their performance. The use of
replacement parts that are not of the original design and quality may
impair the effectiveness of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that
the
part will not adv
ersely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emission
regulations.
Maintenance
Follow the MA
INTENANCE SCHEDUL E on page 34. Remember that
this schedule is based on the assumption that yo
ur machine will be
used for its designed purpose. Sustained high-load or high-temperature
operation, or use in dusty conditions, will require more frequent service.
31Z037210.book 59 ページ ２０１４年１月２７日 月曜日 午後１２時２分