Operation Manual

−

CONTROL & FEATURES

i-Monitor

i-Monitor at Start Up

i-Monitor Display

i-Monitor Display Mode 1 Total Operating Hours

i-MONITOR BUTTON

SINGLE-DIGIT

SCREEN DISPLAY

FOUR-DIGIT

SCREEN DISPLAY

The i-Monitor is a user interface that allows the operator to view

(when the generator is running) total operating time in hours,

generator output, engine RPM and error messages. The different

display modes are selected by pressing the i-Monitor button.

The i-Monitor display is divided into two screens. The single-digit

screen displays the i-Monitor mode which is represented by a

number 1 through 3. The four-digit screen displays the three mode

values total operating hours, power output and engine RPM or any

activated error messages.

This mode displays the total operating hours of the generator. When

the generator is running, the total operating time accumulates. If the

total operating time is less than one hour, the numeric display will be

‘‘0.’’ When the operating time is one hour or greater, the display will

be ‘‘1’’ or ‘‘2’’ and so on. Base the generator’s maintenance schedule

on the accumulated time displayed.

During start up, the i-Monitor display and all three indicators will

simultaneously blink once. The condition of the i-Monitor display

andallthreeindicatorscanbecheckedwiththeaidofanobserver.

Once the generator is running, the Output indicator (green) and the

i-Monitor display will remain lit.

05/12/21 14:32:07 31Z12600_022