Full Product Manual

93
ASSEMBLY
Hanger Kit Installation
1. Position the hanger at the generator’s balance point as shown
below.
2. Fit the end tabs of the hanger through the bracket slots, and bolt the
brackets to the hanger and tighten securely.
TORQUE: 17
– 22 lbf·ft (24 – 29 N·m, 2.4 – 3.0 kgf·m)
8×16 mm FLANGE BOLT (4)
HANGER
HANGER BRACKET (2)
11 in (280 mm)
HANGER
GENERATOR
SIDE
31Z238110.book 93 ページ ２０１５年１２月９日 水曜日 午後６時３３分