Operation Manual

GENERATING SET USE

OIL SAFETY SYSTEM

The oil safety system is intended to avoid any risk of

damage to the engine caused by a lack of oil in the lower

housing. As soon as the oil level has reached asafety limit,

the oil safety system releases the decompression lever [1]

which, on raising, automatically stops the engine. The

stopping and the engine speed levers remain in ON

position. In this case, the engine will not restart. Top up the

oil as indicated on page 9.

To restart the engine, press the decompression lever [1] to

relock it, then follow the procedure described in paragraph

“STARTING THE ENGINE”.

NOTE

: the oil safety system must not dispense the

operator from maintaining and checking the oil level every

time before use.

STOPPING THE ENGINE

1. Disconnect all appliances connected to the generating

set receptacles.

2. Put the stopping lever [2] on position “0" (fully lowered to

the limit stop).

3. Put the engine speed lever [3] on position SLOW (fully

lowered to the limit stop).

CAUTION:

•

Never stop the engine by operating the decompression lever.

SAFETY