Full Product Manual

35
OPERATION
120V/240V Position
When the voltage selector switch is in the 120V/240V position, you
must balance the load. Divide the load between the two sets of
receptacles shown below. Balancing is necessary because each set of
receptacles is powered by only one power producing circuit that can
produce a maximum of amps(*).
*:
15.0 A (EG4000CL)
18.8 A (EG5000CL)
22.9 A (EG6500CL)
Set of
Receptacles
Total Current Available Power Producing
CircuitEG4000CL EG5000CL EG6500CL
① + ③ +
15.0A 18.8A 22.9A 1
② +
15.0A 18.8A 22.9A 2
31Z306120.book 35 ページ ２０１５年１１月２７日 金曜日 午前１０時２５分