Operation Manual

11
CONTROLS
ENGINE SWITCH
RECOIL STARTER
Key position:
OFF:
ON:
START:
ENGINE SWITCH
START
ON
OFF
STARTER GRIP
To start and stop the engine.
To stop the engine. Key can be removed/inserted.
To run the engine after starting.
To start the engine by operating the starter motor.
Return the key to the ON position once the engine has started. Do not
use the starter for more than 5 seconds at a time. If the engine fails to
start, release the switch and wait 10 seconds before operating the
starter again.
To start the engine, pull the starter grip lightly until resistance is felt,
then pull briskly.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
01/07/23 12:08:00 31ZB4800_012