Operation Manual

13
CIRCUIT BREAKER
CIRCUIT PROTECTOR
GROUND TERMINAL
AC CIRCUIT BREAKER
GROUND TERMINAL
ON
OOFFFF
ON
OFF
AC CIRCUIT PROTECTOR
The AC circuit breaker will automatically switch OFF if there is a short
circuit or an overload of the generator at the AC receptacle. If the AC
circuit breaker is switched OFF automatically, check that the appliance
is working properly and does not exceed the rated load capacity of the
AC circuit before switching the AC circuit breaker ON again.
The AC circuit breaker may be used to switch the generator AC power
ON or OFF.
The circuit protectors will automatically switch OFF if there is a short
circuit or a significant overload of the generator at the 120V 20A or
120/240V 20A locking plug receptacle. If a circuit protector switches
OFF automatically, check that the appliance is working properly and
does not exceed the rated load capacity of the circuit before resetting
the circuit protector to the ON position.
The generator ground terminal is connected to the frame of the
generator, the metal non-current-carrying parts of the generator, and
the ground terminals of each receptacle.
Before using the ground terminal, consult a qualified electrician,
electrical inspector or local agency having jurisdiction for local codes
or ordinances that apply to the intended use of the generator.
01/07/23 12:08:20 31ZB4800_014