Operation Manual

＋

−

BATTERY TRAY KIT

Install the battery guard on the frame.

Set the battery tray on the battery guard and tighten the bolts.

Route the starter cable under the tank and connect it to the starter

solenoid.

Connect the ground cable to the generator rear housing.

Set the battery on the battery tray and secure with the battery

bracket.

Connect the starter cable to the battery positive ( ) terminal first,

then to the negative ( ) terminal. When disconnecting, disconnect

at the battery negative ( ) terminal first.

Install the battery guard plate on the battery guard.

01/07/23 12:15:02 31ZB4800_054