Operation Manual

−− −

Wheel Kit Installation

TORQUE:

WHEEL (2)

8 16 mm FLANGE BOLT (4)

GENERATOR

SIDE

8 16 mm FLANGE BOLT (4)

4.0 30 mm COTTER PIN (2)

STAND (2)

20 mm WASHER (2)

LONGER

8 mm FLANGE NUT (4)

AXLE

Install the axle assembly on the generator using four 8 16 mm

flange bolts and 8 mm flange nuts.

Install the two stands on the under frame using four 8 16 mm

flange bolts.

17 22 lbf·ft (24 29 N·m , 2.4 3.0 kgf·m)

Apply grease to the axle shaft as shown below, and install the two

wheels on the axle shaft using the washers and split pins.

09/02/25 16:51:21 31Z21600_065