Replacement Part List

31
OPERATION
3. Plug the appliance following the instruction provided with the
parallel operation cable.
4. Turn on the appliance.
If the generators are overloaded (see page 33), or if there is a short
circuit in a connected appliance, the overload indicator (red) will go
ON. The overload indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF. Stop both engines and
investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generator.
31Z406040.book 31 ページ ２０１８年１月１８日 木曜日 午後１時２０分