Replacement Part List

50
SERVICING YOUR GENERATOR
FOAM AIR FILTER CLEANING
A dirty foam air filter will restrict air flow to the carburetor, reducing
engine performance. If you operate the generator in very dusty areas,
clean the foam air filter more frequently than specified in the
Maintenance Schedule (see page 42).
1. Clean the air filter in warm soapy water, rinse, and allow to dry
thoroughly, or clean in nonflammable solvent and allow to dry.
2. Dip the air filter in clean engine oil, and then squeeze out all excess
oil. The engine will smoke when started if too much oil is left in the
air filter.
3. Remove the rubber air guide from the air cleaner case.
Clean the rubber air guide and the air cleaner case with a moist rag,
then reinstall the rubber air guide.
Clean
Squeeze and dry
Dip in oil
Squeeze
Do not twist. Do not twist.
AIR CLEANER CASE
RUBBER AIR GUIDE
31Z406040.book 50 ページ ２０１８年１月１８日 木曜日 午後１時２０分