Replacement Part List

STORAGE

Engine Oil

Change the engine oil (see page 47).

Engine Cylinder

1. Remove the spark plug (see page 51), and pour approximately one

teaspoon (5 cc) of clean engine oil into the cylinder. Crank the engine

several revolutions to distribute the oil, and then reinstall the spark

plug.

2. Reinstall the spark plug cap on the spark plug securely.

3. Reinstall the spark plug maintenance cover.

4. Reinstall the maintenance cover and tighten the maintenance cover

screw securely.

5. Pull the starter grip (see page 24) slowly until you feel resistance,

and then return the starter grip gently. This closes the valves so

moisture cannot enter.

31Z406030.book 59 ページ２０１７年３月１４日　火曜日　午後２時４９分