Replacement Part List

84
INITIAL USE INSTRUCTIONS
ENGINE OIL
The generator is shipped WITHOUT OIL in the engine.
1. Place the generator on a level surface.
2. Loosen the maintenance cover screw and remove the maintenance
cover.
3. With the generator in a level position, remove the oil filler cap.
4. Add enough SAE 10W-30 API service category SJ or later (or
equivalent) oil to bring the oil level to the upper limit of the oil filler
neck. SAE 10W-30 oil is recommended for general use; for
additional recommendations, see page 48.
Maximum oil capacity: 8 oz (0.25 L)
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may be transferred to the air cleaner case and air filter.
5. Screw in the oil filler cap securely.
6. Reinstall the maintenance cover and tighten the maintenance cover
screw securely.
MAINTENANCE COVER SCREW
MAINTENANCE COVER
OIL FILLER CAP
UPPER LIMIT
OIL FILLER NECK
31Z406030.book 84 ページ ２０１７年３月１４日 火曜日 午後２時４９分