Replacement Part List

60
SERVICING YOUR GENERATOR
FUSE
If the fuse is blown, the starter motor won’t operate.
1. Turn the engine switch to the OFF position.
2. Remove the four 6 mm cap nuts and the front cover.
3. Remove the fuse holder cover and replace the fuse.
The specified fuse is 5 A.
If frequent fuse failure occurs, determine the cause and correct the
problem before attempting to operate the generator further.
Never use a fuse with a different rating from that specified. Serious
damage to the electrical system or fire may result.
COLLAR (4)
FRONT COVER
6 mm CAP NUTS
FUSE HOLDER
31ZT76331.book Page 60 Friday, February 23, 2018 2:59 PM